1EFF : ALL 1 52-32-00Page 71 1 1 Aug 01/05 1 1 1CES 1 The sequence shaft operates the link assy at the same time so that the target lever moves to the door sill. The related target operates the proximity switch 32WV (Ref. 52-71-00). When the door handle is in line with the cargo door contour, the target operates the proximity switch 34WV . This causes the visual warning in the cockpit to go off (Ref. 52-71-00). In this position, the hook of the door structure safeties the door handle against movement.

 1EFF : 106-149, 221-299, 301-399, 401-499, 1 52-32-00Page 72 1 1 Aug 01/05 1 1 1CES 1 1EFF : ALL 1 52-32-00Page 401 1 1 May 01/05 1 1 1CES 1

 AFT CARGO COMPARTMENT DOOR - DEACTIVATION/REACTIVATION______________________________________________________ 
R  **ON A/C 051-052, 
R  TASK 52-32-00-040-002 
R  Deactivation of the Locking Handle 
R  1. Reason for the Job__________________ 
R  Refer to the CDL TASK: 52-8 
R  Cargo door opening system 
R  Handle of cargo door 
R  2. Job Set-up Information______________________ 
R  A. Consumable Materials 
R  -------------------------------------------------------------------------------
R  REFERENCE DESIGNATION 
R  -------------------------------------------------------------------------------
R  Material No. 08-061 USA MIL-T-4053 
R  TAPE SOUND DAMPENINGALUMINIUM FOIL (Ref. 20-31-00) 
R  Material No. 11-016 USA BOEING BAC 5000 BAC 5504 BAC 5750 
R  CLEANING SOLVENT (Ref. 20-31-00) 
R  B. Referenced Information 
R  -------------------------------------------------------------------------------
R  REFERENCE DESIGNATION 
R  -------------------------------------------------------------------------------
R  52-30-00-860-002 Close the FWD or AFT Cargo-Compartment Door with the 
R  Yellow Electric Pump

R  3. Job Set-up__________ 
R  Subtask 52-32-00-860-056 
R  A. Aircraft Maintenance Configuration 
R  (1) Make sure that the AFT cargo compartment door (referred to as cargo 
R  door) is correctly closed and locked (Ref. TASK 52-30-00-860-002). 
R  NOTE : If necessary, operate the damage locking handle with an____ 
R  applicable tool. 
R  4. Procedure_________ 
R  Subtask 52-32-00-220-050 
R  A. Check of the Cargo Door 
R  (1) Make sure that you can see the green mark of each safety cam through 
R  the indication windows of the door access panel 826AR. 
R  (2) Examine the vent door to make sure that it is closed and aligns with 
R  the cargo door skin. 
R  (3) Do this operational test: 
R  -------------------------------------------------------------------------------
R  ACTION  RESULT 
R  -------------------------------------------------------------------------------
R  1. On the cargo door:  On the Cargo Door: 
R  - try to push the vent door  - the vent door must not move in its 
R  inboards.  open direction. 
R  Subtask 52-32-00-040-050 
R  B. Deactivation of the Locking Handle 
R  WARNING : OBEY THE MANUFACTURER'S INSTRUCTIONS WHEN YOU USE THIS/THESE_______ 
R  MATERIAL/S. 
R  USE PROTECTIVE CLOTHING, RUBBER GLOVES, GOGGLES AND A MASK. 

R 1EFF : 051-052, 1 52-32-00Page 402 1 1 May 01/05 1 1 1CES 1

R  WARNING : MAKE SURE THAT THERE IS A GOOD FLOW OF AIR THROUGH THE WORK_______ 
R  AREA WHEN YOU USE SPECIAL MATERIALS. 
R  IF YOU GET ONE OF THESE MATERIALS ON YOUR SKIN, IN YOUR MOUTH 
R  OR IN YOUR EYES : 
R  -FLUSH IT AWAY WITH A FLOW OF CLEAN WATER FOR BETWEEN 10 AND 15 
R  MINUTES. 
R  -GET IMMEDIATE MEDICAL AID IF IRRITATION OCCURS. 
R  DO NOT BREATHE THE FUMES FROM THE MATERIAL. 
R  DO NOT SMOKE WHEN YOU USE THE MATERIAL. 
R  DO NOT USE THE MATERIAL NEAR A FLAME, SPARKS OR SOURCES OF 
R  HEAT. 
R  THESE MATERIALS ARE DANGEROUS : THEY ARE POISONOUS, FLAMMABLE 
R  AND SKIN IRRITANTS. 
R  (1) Clean the cargo door skin around the handle recess with CLEANING 
R  AGENTS (Material No. 11-016). 
R  (2) Cover the cutout of the handle recess with BONDING AND ADHESIVE 
R  COMPOUNDS (Material No. 08-061) (high-speed tape). 
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM DOORS 艙門5