(d)
 If you find a crack, replace the locking hook (Ref. TASK 52-31-21-000-001).

 1EFF : 001-049, 051-099, 101-149, 201-299, 1 52-32-11Page 632 1301-399, 1Aug 01/05R 1 1 1CES 1

 (2) Examine the fork fittings of each door frame and the adjacent skin area for scratches, marks, cracks and corrosion.
 (a) If you find a scratch or a mark,
 -determine the extent of the damaged area (Ref. SRM 52-30-00),
 -remove the damage when it is less than the limit (Ref. SRM 51-73-00).
 NOTE : When the scratch or mark is larger than the limit, repair
____ the fork fitting or replace it (Ref. SRM 52-30-00).
 (b) If you find corrosion,
 -determine the extent of the corroded area (Ref. SRM 52-30-00),
 -remove the damage when it is less than the limit (Ref. SRM 51-74-00).
 NOTE : When the corroded area is larger than the limit, repair
____ the fork fitting or replace it (Ref. SRM 52-30-00).
 (3) Make sure that the paint coat of the fork fitting and the adjacent skin area is in the correct condition (Ref. TASK 51-75-12-300-001).
 **ON A/C 001-049, 051-099, 101-149, 201-299, 301-399,
 Subtask 52-32-11-916-051
 C. Application of Temporary Protection
 CAUTION : DO NOT APPLY TEMPORARY PROTECTION ON THE OXYGEN SYSTEMS.
_______ MAKE SURE THAT THE TEMPORARY PROTECTION DOES NOT GET: -ON COMPOSITE PARTS, CONTROL CABLES, PULLEYS,TEFLON BEARINGS. -ON LUBRICATED SURFACES. -IN DRAIN VALVES OR OTHER ORIFICES. TEMPORARY PROTECTION ON OR IN THESE PARTS CAN CAUSE DAMAGE.
 (1)
 Cover the equipment and fittings adjacent to the area with masking paper or masking tape, if necessary.

 (2)
 Apply a layer of STORAGE PRESERVATION (Material No. 15-005) or STORAGE PRESERVATION (Material No. 15-006) to the inspection area.

 (3)
 Remove the masking paper or the masking tape.

R 1EFF : 001-049, 051-099, 101-149, 201-299, 1 52-32-11Page 633 1301-399, 1Aug 01/05 1 1 1CES 1

 5. Close-up
________ Subtask 52-32-11-865-061
 A. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s): 1MJ, 3801GX, 3802GX, 3803GX
 Subtask 52-32-11-410-055
 B. Close Access
 (1)
 Make sure that the work area is clean and clear of tool(s) and other items.

 (2)
 Install the access panel 826AR.

 (3)
 Remove the actuator safety locks and close the cargo door (Ref. TASK 52-30-00-860-002).

 (4)
 Remove the access platform(s).

R 1EFF : 001-049, 051-099, 101-149, 201-299, 1 52-32-11Page 634 1301-399, 1Aug 01/05 1 1 1CES 1R **ON A/C 151-199, 401-499,

 TASK 52-32-11-200-007
 Detailed Visual Inspection of AFT Cargo Compartment Door (Internal Structure)
 1. Reason for the Job
__________________
 Refer to the MPD TASK: 523213-01
 2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific circuit breaker(s) safety clip(s)
 No specific lint-free cloth
 No specific masking paper
 No specific masking tape
 No specific access platform 3.5 m (11 ft. 6 in.)

 B. Consumable Materials
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 11-002  USA MIL-PRF-680
 DRY CLEANING SOLVENT (VARSOL/WHITE SPIRIT)
 (Ref. 20-31-00)

 Material No. 15-004  USA MIL-C-16173 GRADE 3
 CORROSION PREVENTIVE COMPOUND (Ref. 20-31-00)

 Material No. 15-005  AIB TN 10138 TYPE I GRADE 2 CORROSION PREVENTIVE TEMPORARY PROTECTIVE COMPOUND (Ref. 20-31-00)
 Material No. 15-006  AIB TN 10138 TYPE I GRADE 3 CORROSION PREVENTIVE TEMPORARY PROTECTIVE COMPOUND (Ref. 20-31-00)
 Material No. 15-007  AIB TN 10138 TYPE II GRADE 1 CORROSION PREVENTIVE TEMPORARY PROTECTIVE COMPOUND (Ref. 20-31-00)
R 1EFF : 151-199, 401-499, 1 52-32-11Page 635 1 1 Aug 01/05 1 1 1CES 1

 C. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
51-75-12-300-001 Repair of Major Paint Damage on Light Alloy and
 Composite Material 51-76-11-300-001 Repair of the Sealing 52-30-00-860-001 Open the FWD or AFT Cargo-Compartment Door with the
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM DOORS 艙門5(51)