**ON A/C 051-052,
52-32-11-991-027 Fig. 611A
**ON A/C 001-049, 051-099, 101-149, 201-299, 301-399,
3. Job Set-up
__________ Subtask 52-32-11-941-050
A. Put the ACCESS PLATFORM 3M (10 FT)- ADJUSTABLE in position at the closed aft cargo-compartment door 826.
4. Procedure
_________ **ON A/C 001-049, 053-099, 101-149, 201-299, 301-399,
(Ref. Fig. 611/TASK 52-32-11-991-027-A) **ON A/C 051-052,
(Ref. Fig. 611A/TASK 52-32-11-991-027) **ON A/C 001-049, 051-099, 101-149, 201-299, 301-399,
Subtask 52-32-11-210-063
A. General Visual Inspection Procedure
(1)
Clean the component interface and/or the adjacent area.
(2)
Examine the external surface of the aft cargo-compartment door for cracks, dents and scratches to the surface protection.
(a) If you find cracks, dents, scratches or other damage: 1 Find the dimensions of the damage and the allowable damage
_
limits (Ref. ASRM 52320010100).
1EFF : 001-049, 051-099, 101-149, 201-299, 1 52-32-11Page 666 1301-399, 1Aug 01/05R 1 1 1CES 1
External Surface of Aft Cargo-Compartment-Door Figure 611/TASK 52-32-11-991-027-A
R 1EFF : 001-049, 053-099, 101-149, 201-299, 1 52-32-11Page 667 1301-399, 1Aug 01/05 1 1 1CES 1
Aft Cargo-Compartment-Door External Surface
Figure 611A/TASK 52-32-11-991-027
R 1EFF : 051-052, 1 52-32-11Page 668 1 1 Aug 01/05 1 1 1CES 1
2_ If you find damage to the surface protection only, repair it
(Ref. TASK 51-75-12-300-001) or (Ref. TASK 51-75-12-300-003),
as necessary.
3_ If you find damage that is less than the limit, remove it
(Ref. ASRM 51730000100) or (Ref. TASK 51-73-11-300-001) or
(Ref. TASK 51-73-11-300-003).
4_ If you find damage that is more than the allowable limits,
repair the aft cargo-compartment door (Ref. ASRM 52320020100).
(3) Examine the indication windows of the access panel 826AR for cracks and scratches.
(a)
If there are cracks, replace the pane of the indication windows (Ref. CMM 523112) or (Ref. CMM 523115) .
(b)
If there are scratches on the window pane of the indication windows, replace it at not more than 100FC after this inspection.
5. Close-up
________ Subtask 52-32-11-942-051
A. Remove the access platform(s).
1EFF : 001-049, 051-099, 101-149, 201-299, 1 52-32-11Page 669 1301-399, 1Aug 01/05R 1 1 1CES 1
TASK 52-32-11-200-012
General Visual Inspection of Locking Hooks and Fork Fittings of Aft Cargo Compartment Door at all Frames, between Longeron 4 and Longeron 5 (6 Places)
1.
Reason for the Job
__________________
Refer to the MPD TASK: 523119-02
2.
Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific 1 ACCESS PLATFORM 3M (10 FT)- ADJUSTABLE
B. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
51-73-11-300-001 Repair of Minor Damage on Aluminum Clad Components 52-30-00-860-001 Open the FWD or AFT Cargo-Compartment Door with the Yellow Electric Pump 52-30-00-860-002 Close the FWD or AFT Cargo-Compartment Door with the
Yellow Electric Pump ASRM 51730000100 ASRM 52320010100 ASRM 52320020100 52-32-11-991-028 Fig. 612
3. Job Set-up
__________ Subtask 52-32-11-010-069
A. Get Access
(1)
Put the ACCESS PLATFORM 3M (10 FT)- ADJUSTABLE in position below the aft cargo-compartment door.
(2)
Open the aft cargo-compartment door 826 and safety it with the actuator safety lock (Ref. TASK 52-30-00-860-001).
1EFF : 001-049, 051-099, 101-149, 201-299, 1 52-32-11Page 670 1301-399, 1Aug 01/05R 1 1 1CES 1
4. Procedure
_________
(Ref. Fig. 612/TASK 52-32-11-991-028) Subtask 52-32-11-210-064
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM DOORS 艙門5(59)
