-------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
1. On the proximity switches 34WV: On the proximity switches 34WV:
 -measure the clearance between  - the clearance must be between 1.6 mm the target on the door handle (0.0629 in.) and 2.0 mm (0.0787 in.). and the sensor on the door structure.
 2. On the proximity switches 32WV: On the proximity switches 32WV:
R 1EFF : 062-099, 106-149, 204-299, 301-399, 1 52-32-00Page 542 1 1 Aug 01/05 1 1 1CES 1

 Check of the Proximity Switches 32WV, 34WV and 12MJ Figure 503B/TASK 52-32-00-991-003-C
R 1EFF : 106-149, 221-299, 301-399, 1 52-32-00Page 543 1 1 Aug 01/05 1 1 1CES 1

 -------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
- measure the clearance between  - the clearance must be between 1.5 mm
 the target on the target lever  (0.0590 in.) and 2.0 mm (0.0787 in.).
 (part of the switch mechanism)
 and the sensor on the cargo
 door sill.
 3. On the cargo door:  On the cargo door:
 - pull the door handle away from  - the cargo door is in the unlocked
 the door structure and move it  condition.
 fully up to the UNLOCKED
 position.
 4. On the proximity switches 12MJ:  On the proximity switches 12MJ:
 - measure the clearance between  - the clearance must be between 1.6 mm
 the target on the latching  (0.0629 in.) and 2.0 mm (0.0787 in.).
 shaft and the sensor on the
 structure.

R  (4) Install the access panel 826AR. (5) Make sure that the cargo door is correctly closed and locked (Ref. TASK 52-30-00-860-002) when the test is completed. **ON A/C 151-199, 401-499,
R  Subtask 52-32-00-720-053-D D. Check of the Proximity Switches 32WV, 34WV and 12MJ **ON A/C 151-199,
R  (Ref. Fig. 503C/TASK 52-32-00-991-003-B) **ON A/C 401-499, 
R  (Ref. Fig. 503D/TASK 52-32-00-991-003-D) 

R 1EFF : 062-099, 106-149, 151-199, 204-299, 1 52-32-00Page 544 1301-399, 401-499, 1Aug 01/05 1 1 1CES 1

 Check of the Proximity Switches 32WV, 34WV and 12MJ R Figure 503C/TASK 52-32-00-991-003-B
 1EFF : 151-199, 1 52-32-00Page 545 1 1 May 01/05 1 1 1CES 1R Check of the Proximity Switches 32WV, 34WV and 12MJ R Figure 503D/TASK 52-32-00-991-003-D

R 1EFF : 401-499, 1 52-32-00Page 546 1 1 Aug 01/05 1 1 1CES 1R **ON A/C 151-199, 401-499,

 WARNING : STAY AFT OF THE CARGO DOOR WHILE YOU UNLOCK IT. THE CARGO DOOR
_______ CAN OPEN SUDDENLY WHEN IT IS UNLOCKED AND CAN CAUSE INJURY.
 (1)
 Make sure that the cargo door is correctly closed and locked (Ref. TASK 52-30-00-860-002).

 (2)
 Remove the access panels 826AR, 826BR and 826CR to get access to the applicable proximity switches.

 (3)
 Do this test:

 NOTE : If necessary, adjust the clearance of
____
 -
the proximity switches 34WV (Ref. TASK 52-71-12-400-001),

 -
the proximity switches 32WV (Ref. TASK 52-71-12-400-002),

 -
the proximity switches 12MJ (Ref. TASK 52-35-13-400-002).

 -------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
1. On the proximity switches 34WV: On the proximity switches 34WV:
 -measure the clearance between  - the clearance must be between 1.6 mm the target on the door handle (0.0629 in.) and 2.0 mm (0.0787 in.). and the sensor on the door structure.
 2. On the proximity switches 32WV: On the proximity switches 32WV:
 -measure the clearance between  - the clearance must be between 1.5 mm the target on the target lever (0.0590 in.) and 2.0 mm (0.0787 in.). (part of the switch mechanism) and the sensor on the cargo door sill.
 3. On the cargo door:  On the cargo door:
 -pull the door handle away from  - the cargo door is in the unlocked the door structure and move it condition. fully up to the UNLOCKED position.
 4. On the proximity switches 12MJ: On the proximity switches 12MJ:
 -measure the clearance between  - the clearance must be between 1.6 mm the target on the latching (0.0629 in.) and 2.0 mm (0.0787 in.). shaft and the sensor on the structure.
R 1EFF : 151-199, 401-499, 1 52-32-00Page 547 1 1 Aug 01/05 1 1 1CES 1

 (4)
 Install the access panels 826AR, 826BR and 826CR.
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM DOORS 艙門5(16)