(e)
Install the Hi-Lok pins (398), the washers (417) and the nuts (414).
(f)
Refer to the marks you made during the removal procedure and assemble the serrated lever (392) on the sequence shaft (400)
(g)
Install the screw (390) and the washer (391) in the serrated lever (392) and tighten it.
(h)
Refer to the marks you made during the removal procedure and assemble the serrated lever (416) and the link lever (408) on the locking shaft (400).
(i)
Make sure that the attachment holes align.
(j)
Install the Hi-Lok pin (415), the washer (401) and the nut (402).
(k)
Tighten the nuts (402) and (414).
(2)
Connect the bellcrank assy (412) to the serrated lever (416) as follows:
(a)
Put the fork-end of the bellcrank assy (412) on the eye-end of the serrated lever (416).
(b)
Install the bolt (413), the washers (411) and the nut (410).
(c)
Tighten the nut (410) and safety it with the new cotter pin (409).
R 1EFF : 106-149, 221-299, 301-399, 401-499, 1 52-32-21Page B478 1 1 Aug 01/05 1 1 1CES 1
(3)
Connect the link assy (406) to the link lever (408) as follows:
(a)
Put the upper fork-end of the link assy (406) on the eye-end of the link lever (408).
(b)
Install the bolt (407), the washer (405) and the nut (404).
(c)
Tighten the nut (404) and safety it with the new cotter pin (403).
(4)
Connect the connection rod (395) to the serrated lever (392) as follows:
(a)
Put the upper eye-end of the connection rod (395) in the fork-end of the serrated lever (392).
(b)
Install the bolt (394), the washers (393) and the nut (396).
(c)
Tighten the nut (396) and safety it with the new cotter pin (397).
Subtask 52-32-21-820-063
C. Adjustment Procedure
(1) Adjust the door mechanism (Ref. TASK 52-32-11-820-002). Subtask 52-32-21-865-088
D. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s): 1MJ, 3801GX, 3802GX, 3803GX.
Subtask 52-32-21-720-060
E. Do the functional test of the door mechanism to make sure that the
sequence mechanism operates correctly (Ref. TASK 52-32-00-720-001).
R 1EFF : 106-149, 221-299, 301-399, 401-499, 1 52-32-21Page B479 1 1 Aug 01/05 1 1 1CES 1
5. Close-up________
R **ON A/C 106-149, 221-299, 301-399,
Subtask 52-32-21-410-064
A. Close Access (Ref. Fig. 403A/TASK 52-32-21-991-019-B)
(1) Make sure that the work area is clean and clear of tool(s) and other items.
(2) Apply the STORAGE PRESERVATION (Material No. 15-005) or the STORAGE PRESERVATION (Material No. 15-006) to all the components of the sequence shaft assembly and to the adjacent cargo door structure.
(3) Install the access panel 826AR on the cargo door.
(4) Remove the actuator safety locks and close the cargo door (Ref. TASK 52-30-00-860-002).
(5) Remove the access platform(s).
R **ON A/C 401-499,
R Subtask 52-32-21-410-064-A
R R A. Close Access (Ref. Fig. 403C/TASK 52-32-21-991-019-C)
R R (1) Make sure that the work area is clean and clear of tool(s) and other items.
R R R (2) Apply the STORAGE PRESERVATION (Material No. 15-005) or the STORAGE PRESERVATION (Material No. 15-006) to all the components of the sequence shaft assembly and to the adjacent cargo door structure.
R (3) Install the access panels 826AR, 826BR and 826CR on the cargo door.
R R (4) Remove the actuator safety locks and close the cargo door (Ref. TASK 52-30-00-860-002).
R (5) Remove the access platform(s).
R 1EFF : 106-149, 221-299, 301-399, 401-499, 1 52-32-21Page B480 1 1 Aug 01/05 1 1 1CES 1R **ON A/C 001-049, 053-099, 101-149, 151-199, 201-299, 301-399, 401-499,
TASK 52-32-21-000-012
Removal of the Latching Shaft Assembly
1.
Reason for the Job
__________________
Self Explanatory
2.
Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
No specific circuit breaker(s) safety clip(s)
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM DOORS 艙門5(145)
