B. Open, safety and tag this(these) circuit breaker(s):
 -------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------121VU HYDRAULIC/HYD POWER/Y 3803GX N30 122VU DOORS/CARGO 1MJ T12 123VU Y HYD/ELEC/PUMP 3802GX AB06 123VU Y HYD/ELEC/ELEC PUMP/NORM 3801GX AB03
 4. Procedure
_________
 (Ref. Fig. 605/TASK 52-32-11-991-024)
 Subtask 52-32-11-210-060
 A. Visual Inspection of the Piano Hinge Fittings
 (1) Examine the piano hinge fittings on the top of the cargo door for scratches, cracks and corrosion (inspection area "A")
 (a) If you find a scratch,
 -determine the extent of the damaged area (Ref. SRM 52-30-00),
 -remove the damage when it is less than the limit (Ref. SRM 51-73-00).
 NOTE : When the scratch is larger than the limit, repair the
____ affected fitting (Ref. SRM 52-30-00) or replace it (Ref. CMM 52-31-12).
 (b)
 If you find a crack, repair it immediately (Ref. SRM 51-73-00).

 (c)
 If you find corrosion

 -determine the extent of the corroded area (Ref. SRM 52-30-00),
 -remove the damage when it is less than the limit (Ref. SRM 51-74-00).
 (2) Remove the actuator safety locks and close the cargo door to get access to the inspection area "B" (Ref. TASK 52-30-00-860-002).
R 1EFF : 151-199, 401-499, 1 52-32-11Page 644 1 1 Aug 01/05 1 1 1CES 1

R Inspection of the Piano Hinge Fittings of the AFT Cargo Door Figure 605/TASK 52-32-11-991-024
R 1EFF : 151-199, 401-499, 1 52-32-11Page 645 1 1 Aug 01/05 1 1 1CES 1

 (3) Examine the piano hinge fittings on the outer side of the cargo door for scratches, cracks and corrosion (inspection area "B").
 (a) If you find a scratch,
 -determine the extent of the damaged area (Ref. SRM 52-30-00),
 -remove the damage when it is less than the limit (Ref. SRM 51-73-00).
 NOTE : When the scratch is larger than the limit, repair the
____ affected fitting (Ref. SRM 52-30-00) or replace it (Ref. CMM 52-31-12).
 (b)
 If you find a crack, repair it immediately (Ref. SRM 51-73-00).

 (c)
 If you find corrosion

 -determine the extent of the corroded area (Ref. SRM 52-30-00),
 -remove the damage when it is less than the limit (Ref. SRM 51-74-00).
 5. Close-up
________ Subtask 52-32-11-865-073
 A. Make sure that this(these) circuit breaker(s) is(are) closed:
 1MJ, 3801GX, 3802GX, 3803GX

 Subtask 52-32-11-410-066
 B. Close Access
 (1)
 Make sure that the work area is clean and clear of tool(s) and other items.

 (2)
 Make sure that the cargo door is closed and locked correctly (Ref. TASK 52-30-00-860-002).

 (3)
 Remove the access platform(s).

R 1EFF : 151-199, 401-499, 1 52-32-11Page 646 1 1 Aug 01/05 1 1 1CES 1 TASK 52-32-11-200-009

 Detailed Visual Inspection of Locking Hooks and Fork Fittings of the AFT Cargo Compartment Door
 1. Reason for the Job
__________________
 Refer to the MPD TASK: 523219-01
 2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific circuit breaker(s) safety clip(s) No specific lint-free cloth No specific masking paper No specific masking tape No specific access platform 3.5 m (11 ft. 6 in.)
 B. Consumable Materials
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 11-002  USA MIL-PRF-680 DRY CLEANING SOLVENT (VARSOL/WHITE SPIRIT) (Ref. 20-31-00)
 Material No. 15-005  AIB TN 10138 TYPE I GRADE 2 CORROSION PREVENTIVE TEMPORARY PROTECTIVE COMPOUND (Ref. 20-31-00)
 Material No. 15-006  AIB TN 10138 TYPE I GRADE 3 CORROSION PREVENTIVE TEMPORARY PROTECTIVE COMPOUND (Ref. 20-31-00)
R 1EFF : 151-199, 401-499, 1 52-32-11Page 647 1 1 Aug 01/05 1 1 1CES 1

 C. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
51-73-11-300-002 Repair of Minor Damage on Titanium, Forged Aluminum, or Steel Components 51-75-12-300-001 Repair of Major Paint Damage on Light Alloy and Composite Material 52-30-00-860-001 Open the FWD or AFT Cargo-Compartment Door with the Yellow Electric Pump 52-30-00-860-002 Close the FWD or AFT Cargo-Compartment Door with the
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM DOORS 艙門5(54)