(2)
 Examine the locking hooks for corrosion, cracks, distortion, fretting, gouges, nicks, scratches, other damage and correct installation.

 (a)
 If you find corrosion, cracks, distortion, fretting, gouges, nicks, scratches or other damage:

 -Find the dimensions of the damage and the allowable limits (Ref. ASRM 52320010100).

 (b)
 Make sure the locking hooks are correctly installed.

 (3)
 Examine the bushes and bolts of the locking hook mechanisms for corrosion, cracks, gouges, nicks, scratches, wear or damage and correct installation:

 1_ If you find damage that is less than the limit, remove it
 (Ref. ASRM 51730000100) or (Ref. TASK 51-73-11-300-001).
 2_ If you find damage that is more than the limit, repair/replace
 the locking hook, refer to (Ref. ASRM 52320020100).

 (a) If you find corrosion, cracks, gouges, nicks, scratches, wear or other damage:
 -Find the dimensions of the damage and the allowable limits (Ref. ASRM 52320010100).
 1 If you find damage that is less than the limit, remove it
_ (Ref. ASRM 51730000100).
 2 If you find damage that is more than the limit, repair/replace
_ the necessary locking hook mechanisms, refer to (Ref. ASRM 52320020100).
 (b) Make sure the bushes and bolt assemblies of the locking hook mechanisms are correctly installed.
R 1EFF : 001-049, 051-099, 101-149, 201-299, 1 52-32-11Page 671 1301-399, 1Aug 01/05 1 1 1CES 1

 Locking Hooks and Fork Fittings
 Figure 612/TASK 52-32-11-991-028

R 1EFF : 001-049, 051-099, 101-149, 201-299, 1 52-32-11Page 672 1301-399, 1Aug 01/05 1 1 1CES 1

 (4) Examine the fork fitting assemblies for corrosion, cracks, distortion, fretting, gouges, nicks, scratches or other damage and correct installation.
 (a) If you find corrosion, cracks, distortion, fretting, gouges, nicks, scratches or other damage:
 -Find the dimensions of the damage and the allowable limits (Ref. ASRM 52320010100).
 1_ If you find damage that is less than the limit, remove it
 (Ref. ASRM 51730000100).
 2_ If you find damage that is more than the limit, repair/replace
 the necessary fork fitting assemblies, refer to (Ref. ASRM
 52320020100).
 5. Close-up________

 **ON A/C 051-052,
 Subtask 52-32-11-410-069
 A. Close the Aft Cargo-Compartment Door
 (1)
 Make sure that the work area is clean and clear of tool(s) and other items.

 (2)
 Remove the actuator safety lock and close the aft cargo-compartment door 826 (Ref. TASK 52-30-00-860-002).

 (3)
 Remove the access platform(s).

R 1EFF : 001-049, 051-099, 101-149, 201-299, 1 52-32-11Page 673 1301-399, 1Aug 01/05 1 1 1CES 1

R **ON A/C 151-199, 401-499,

 TASK 52-32-11-200-013
 General Visual Inspection of Aft Cargo Compartment Door Skin, External Surface
 1. Reason for the Job
__________________
 Refer to the MPD TASK: 523211-01
 2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific 1 ACCESS PLATFORM 3M (10 FT)- ADJUSTABLE
 B. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
ASRM 51730000100 ASRM 52320010100 ASRM 52320020100 (for corrective action) CMM 523114 (for corrective action) 51-73-11-300-001 Repair of Minor Damage on Aluminum Clad Components
 (for corrective action) 51-73-11-300-003 Repair of Dents in Skin Panels (for corrective action) 51-75-12-300-001 Repair of Major Paint Damage on Light Alloy and Composite Material (for corrective action) 51-75-12-300-003 Repair of Minor Paint Damage (Topcoat Only) (for corrective action) 52-32-11-991-029-A Fig. 613
 3. Job Set-up
__________
 Subtask 52-32-11-941-051
 A. Put the ACCESS PLATFORM 3M (10 FT)- ADJUSTABLE in position at the closed aft cargo-compartment door 826.
R 1EFF : 151-199, 401-499, 1 52-32-11Page 674 1 1 Aug 01/05 1 1 1CES 1

 4. Procedure
_________
 (Ref. Fig. 613/TASK 52-32-11-991-029-A) Subtask 52-32-11-210-065
 A. General Visual Inspection Procedure
　
中國航空網(wǎng) m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機(jī)維護(hù)手冊(cè) AMM DOORS 艙門5(60)