(d)
 Install the tapered pins (149) to attach the drift pin lever

 (158) on the locking shaft (148).

 (e)
 Install the sleeves (150), the washers (151) and the nuts (152) on the tapered pins (149).

 (f)
 Assemble the locking shaft lever (56) and the vent door lever

 (162) on the ends of the locking shaft (148) (in accordance with your mark).

 (g)
 Install the tapered pins (165) to attach the vent door lever

 (162) on the locking shaft (148).

 (h)
 Install the sleeves (166), the washers (167) and the nuts (168) on the tapered pins (165).

 (i)
 Install the tapered pins (143) to attach the locking shaft lever

 (52) on the locking shaft (148).

 (j)
 Install the sleeves (142), the washers (141) and the nuts (140) on the tapered pins (143).

 (k)
 Install the Hi-Lok pins (144) to attach the lock cams (145) on the locking shaft (148).

 (l)
 Install the washers (147) and the nuts (146) on the Hi-Lok pins (144).

 (m)
 Tighten the nuts (140), (146), (152) and (168).

 (2) Connect the control rod (56) to the locking shaft lever (52) as follows:
 (a) Put the lower fork-end of the control rod (56) on locking shaft lever (52) and install the bolt (57), the washers (55) and the nut (54).
R 1EFF : 001-049, 053-099, 101-105, 201-220, 1 52-32-21Page B460 1 1 Aug 01/05 1 1 1CES 1

 (b) Tighten the nut (54) and safety it with the new cotter pin (53).
 (3) Connect the control rod (156) to the drift pin lever (158) as follows:
 (a) Put the fork-end of the control rod (156) to the drift pin lever (158) and install the bolts (157), the washers (155) and the nuts (154).
 (b) Tighten the nut (154) and safety it with the new cotter pin (153).
 (4) Connect the connection rod (159) to the vent door lever (162) as follows:
 (a) Put the lower eye end of the connection rod (159) in the fork end of the vent door lever (162).
 (b) Install the bolt (160), the washers (161) and the nut (163).
 (c) Tighten the nut (163) and safety it with the new cotter pin (164). 
R  **ON A/C 106-149, 221-299, 301-399, 401-499,
 Subtask 52-32-21-420-069-B
 B. Installation of the Locking Shaft Assembly 
R  **ON A/C 106-149, 221-299, 301-399,
 (Ref. Fig. 415A/TASK 52-32-21-991-016-B) 
R  **ON A/C 401-499, 
R  (Ref. Fig. 415C/TASK 52-32-21-991-016-C) 

R 1EFF : 001-049, 053-099, 101-149, 201-299, 1 52-32-21Page B461 1301-399, 401-499, 1Aug 01/05 1 1 1CES 1R **ON A/C 106-149, 221-299, 301-399, 401-499,

 (1) Install the locking shaft (148) at the cargo door structure as follows:
 (a)
 Move the locking shaft (148) through the lateral cutout of the cargo door into the sliding bearing of each frame fork end.

 (b)
 During this movement, assemble the lock cams (145) in the correct sequence on the locking shaft (148).

 (c)
 Refer to the marks you made during the removal procedure and assemble the lock cams (145) in its correct position on the locking shaft (148) and make sure that the attachment holes align.

 (d)
 Refer to the marks you made during the removal procedure and assemble the locking shaft lever (52) and the lever (162) on the ends of the locking shaft (148) and make sure that the attachment holes align.

 (e)
 Install the tapered pins (165) to attach the lever (162) on the locking shaft (148).

 (f)
 Install the sleeves (166), the washers (167) and the nuts (168) on the tapered pins (165).

 (g)
 Install the tapered pins (143) to attach the locking shaft lever

 (52) on the locking shaft (148).

 (h)
 Install the sleeves (142), the washers (141) and the nuts (140) on the tapered pins (143).

 (i)
 Install the Hi-Lok pins (144) to attach the lock cams (145) on the locking shaft (148).

 (j)
 Install the washers (147) and the nuts (146) on the Hi-Lok pins (144).

 (k)
 Tighten the nuts (140), (146) and (168).

R 1EFF : 106-149, 221-299, 301-399, 401-499, 1 52-32-21Page B462 1 1 Aug 01/05 1 1 1CES 1

 (2)
 Connect the control rod (59) to the locking shaft lever (52) as follows:

 (a)
 Put the lower fork-end of the control rod (59) on the locking shaft lever (52) and install the bolt (57), the washers (55) and the nut (54).

 (b)
 Tighten the nut (54) and safety it with the new cotter pin (53).

 (3)
 Connect the connection rod (159) to the lever (162) as follows:
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM DOORS 艙門5(140)