(16)
If the door opening angle is less then 135 deg., adjust the length of the both door actuators as follows:
NOTE : A full rotation (360 deg.) of the piston rod (90) increases or
____
decreases the opening angle to 1 deg.
(a)
Close the cargo door until it is in the vertical position.
(b)
Turn the piston rod (90) of both door actuators with the same quantity of rotation to get the correct the opening angle.
(c)
Open the cargo door and make sure that the the door opening angle is between 135 deg and 136 deg.
(17)
TORQUE the nut (92) to between 12.5 and 14.5 m.daN (92.18 and 106.93 lbf.ft).
(18)
Safety the nuts (92) and the locking devices (91) with MISCELLANEOUS (Material No. 19-010).
(19)
TORQUE the nuts (82) to between 1 and 1.35 m.daN (88.49 and 119.46 lbf.in) and safety it with the new cotter pins (81).
(20)
Install the bolts (86), the washers (87), the bonding jumpers (88) and the nuts (89) on the eye-end (93). (Ref. TASK 20-28-00-912-004).
5. Close-up
________ Subtask 52-32-11-865-070
A. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s): 1MJ, 3801GX, 3802GX, 3803GX
Subtask 52-32-11-410-063
B. Close Access
(1)
Close and lock the cargo door (Ref. TASK 52-30-00-860-002).
(2)
Remove the access platform(s).
1EFF : ALL 1 52-32-11Page 589 1 1 Aug 01/05 1 1 1CES 1 1EFF : ALL 1 52-32-11Page 601 1 1 May 01/05 1 1 1CES 1
DOOR - CARGO COMPARTMENT - INSPECTION/CHECK___________________________________________
R **ON A/C 001-049, 051-099, 101-149, 201-299, 301-399,
TASK 52-32-11-200-001
Detailed Visual Inspection of AFT Cargo Compartment Door (Internal Structure)
1. Reason for the Job__________________
Refer to the MPD TASK: 523113-01
2. Job Set-up Information______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific No specific No specific No specific No specific circuit breaker(s) safety clip(s)lint-free clothmasking papermasking tapeaccess platform 3.5 m (11 ft. 6 in.)
B. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
R R R Material No. 09-013 Material No. 11-002 Material No. 15-005 Material No. 15-006 USA MIL-PRF-81733 TYPE I CLASS A CORROSION INHIBITING BRUSH CONSISTENCY (Ref. 20-31-00)USA MIL-PRF-680 DRY CLEANING SOLVENT (VARSOL/WHITE SPIRIT) (Ref. 20-31-00)AIB TN 10138 TYPE I GRADE 2 CORROSION PREVENTIVE TEMPORARY PROTECTIVE COMPOUND (Ref. 20-31-00)AIB TN 10138 TYPE I GRADE 3 CORROSION PREVENTIVE TEMPORARY PROTECTIVE COMPOUND (Ref. 20-31-00)
-------------------------------------------------------------------------------
REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 15-007 AIB TN 10138 TYPE II GRADE 1 CORROSION PREVENTIVE TEMPORARY PROTECTIVE COMPOUND (Ref. 20-31-00)
Material No. 15-008 AIB TN 10138 TYPE II GRADE 2 CORROSION PREVENTIVE TEMPORARY PROTECTIVE COMPOUND (Ref. 20-31-00)
C. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
R R R 20-28-00-912-004 51-75-12-300-001
51-76-11-300-001 52-30-00-860-001
52-30-00-860-002
R R R 52-31-13-000-001 52-31-13-400-001 52-32-11-100-001 52-32-13-000-001 52-32-13-400-001 SRM 51-73-00 SRM 51-74-00 SRM 52-30-00 SRM 52-73-00
Electrical Bonding of Components With Conductive Bolts and Screws and Bonding Straps in the Fuselage and in the Wings (this does not include the tanks)-Repair of Major Paint Damage on Light Alloy and Composite MaterialRepair of the SealingOpen the FWD or AFT Cargo-Compartment Door with the Yellow Electric PumpClose the FWD or AFT Cargo-Compartment Door with the Yellow Electric PumpRemoval of the Lining and the InsulationInstallation of the Lining and the Insulation Cleaning/Painting of AFT Cargo-Compartment Door Removal of the Lining and Insulation Installation of the Lining and Insulation
R **ON A/C 001-049, 053-099, 101-105, 201-220,
52-32-11-991-017-A Fig. 601 R **ON A/C 051-052, R 52-32-11-991-017 Fig. 601A
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM DOORS 艙門5(44)
