Lateral Gaps - AFT Cargo Compartment Door/Fuselage Figure 501/TASK 52-32-11-991-008-A
R 1EFF : 001-049, 051-099, 101-105, 201-220, 1 52-32-11Page 505 1 1 Aug 01/05 1 1 1CES 1

 Lateral Gaps - AFT Cargo Compartment Door/Fuselage R Figure 501A/TASK 52-32-11-991-008-C
R 1EFF : 106-149, 221-299, 301-399, 1 52-32-11Page 506 1 1 May 01/05 1 1 1CES 1

R  **ON A/C 151-199, 401-499,
 Subtask 52-32-11-820-053-A
R  A. Adjustment of the Lateral Gaps **ON A/C 151-199,
R  (Ref. Fig. 501B/TASK 52-32-11-991-008-B) **ON A/C 401-499, 
R R  (Ref. Fig. 501C/TASK 52-32-11-991-008-D) **ON A/C 151-199, 401-499,
 (1) Measure the lateral gaps "A" thru "D" between the cargo door and the fuselage. NOTE : The gap "C" is between the door fairing and the belly fairing.____ (2) If these gaps are larger or smaller than permitted, remove the end fitting from the piano hinge area (Ref. TASK 52-32-11-000-001). (3) Change the thickness of the adjustment washers between the two piano hinge halves of FR57A and FR57. (4) Make sure that the lateral gaps "A" thru "D" are correct. (5) Install the end fittings to the piano hinge area (Ref. TASK 52-32-11-400-001). **ON A/C 001-049, 053-099, 101-149, 201-299, 301-399,
 Subtask 52-32-11-820-054-A
 B. Adjustment of the Skin Offset **ON A/C 001-049, 053-099, 101-105, 201-220,
 (Ref. Fig. 502/TASK 52-32-11-991-009) 

R 1EFF : 001-049, 053-099, 101-149, 151-199, 1 52-32-11Page 507 1201-299, 301-399, 401-499, 1Aug 01/05 1 1 1CES 1

 Lateral Gaps - AFT Cargo Compartment Door/Fuselage
 Figure 501B/TASK 52-32-11-991-008-B

R 1EFF : 151-199, 1 52-32-11Page 508 1 1 Aug 01/05 1 1 1CES 1R Lateral Gaps - AFT Cargo Compartment Door/Fuselage R Figure 501C/TASK 52-32-11-991-008-D

R 1EFF : 401-499, 1 52-32-11Page 509 1 1 Aug 01/05 1 1 1CES 1

 Skin Offset - AFT Cargo Compartment Door/Fuselage
 Figure 502/TASK 52-32-11-991-009

R 1EFF : 001-049, 051-099, 101-105, 201-220, 1 52-32-11Page 510 1 1 Aug 01/05 1 1 1CES 1 **ON A/C 106-149, 221-299, 301-399,

 (Ref. Fig. 502A/TASK 52-32-11-991-009-B)
 **ON A/C 001-049, 053-099, 101-149, 201-299, 301-399,
 (1)
 Make sure that the stop bolts (13) do not touch the stop fittings

 (14) (Ref. TASK 52-32-31-000-001).

 (2)
 Make sure that the latching hooks (3) at FR53 and FR55A touch the rear of the rollers (4).

 (3)
 Measure the skin offset "H" thru "N" between the external contour of the cargo door and the fuselage contour:

 -the skin offset "H" and "J" must be between 0.9 mm (0.0354 in.) and -3.1 mm (-0.1220 in.).
 NOTE : A deviation of 1.2 mm (0.0472 in.) in an area of +/- 150 mm
____ (5.9055 in.) from the measurement point is permitted.
 -
the skin offset "K" and "L" must be between -1.5 mm (-0.0590 in.) and -4.5 mm (-0.1771 in.).

 -
the skin offset "M" and "N" must be between -0.1 mm (-0.0039 in.) and -3.1 mm (-0.1220 in.).

 (4) Adjust the skin offset "M" and "N" as follows:
 NOTE : The other skin offsets are related to the limits of the skin
____
 offsets "M" and "N".

R (a) Remove the nuts (9) and the washers (8) from the special bolt R (11).
 (b)
 Remove the serrated plates (2),(10) from the adjusting bush (5) and the eccentric bolt (1).

 (c)
 Turn the adjusting bush (5) and the eccentric bolt (1) until all skin offsets are correct.

 (d)
 Install the serrated plates (2),(10) at the eccentric bolt (1) and the adjusting bush (5).

 -Make sure that the serrated plates are correctly installed (Ref. TASK 52-32-32-400-001).
R 1EFF : 001-049, 053-099, 101-149, 201-299, 1 52-32-11Page 511 1301-399, 1Aug 01/05 1 1 1CES 1

 Skin Offset - AFT Cargo Compartment Door/Fuselage Figure 502A/TASK 52-32-11-991-009-B
R 1EFF : 106-149, 221-299, 301-399, 1 52-32-11Page 512 1 1 Aug 01/05 1 1 1CES 1

 (e)
 Attach the serrated plates (2),(10) with the washers (8) and the nuts (9) to the door frame fitting (12).

 (f)
 TORQUE the nuts (9) to between 0.3 and 0.4 m.daN (26.54 and 35.39 lbf.in).

 (5) Make sure that the clearances between the stop fittings (14) and the heads of the stop bolts (13) are between 0.1 mm (0.0039 in.) and 0.5 mm (0.0196 in.) (Ref. TASK 52-32-31-400-001).
 **ON A/C 051-052,
 Subtask 52-32-11-820-054
 B. Adjustment of the Skin Offset
 (Ref. Fig. 502/TASK 52-32-11-991-009)
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM DOORS 艙門5(28)