R 1EFF : 001-049, 053-099, 101-149, 151-199, 1 52-32-21Page B451 1201-299, 301-399, 401-499, 1Aug 01/05 1 1 1CES 1
R Locking Shaft Assembly
R Figure 415C/TASK 52-32-21-991-016-C12 (SHEET 1)
R 1EFF : 401-499, 1 52-32-21Page B452 1 1 Aug 01/05 1 1 1CES 1
R Locking Shaft Assembly
R Figure 415C/TASK 52-32-21-991-016-C22 (SHEET 2)
R 1EFF : 401-499, 1 52-32-21Page B453 1 1 Aug 01/05 1 1 1CES 1
(c) Remove the lower eye-end of the connection rod (159) from the vent door lever (162).
(2)
Disconnect the control rod (59) from the locking shaft lever (52) as follows:
(a)
Remove and discard the cotter pin (53) from the nut (54).
(b)
Remove the nut (54), the washers (55) and the bolt (57) from the locking shaft lever (52).
(c)
Remove the lower fork-end of the control rod (59) from the locking shaft lever (52).
(3)
Disassemble the different components from the locking shaft (148) as follows:
(a)
Remove the nuts (140), the washers (141), the sleeves (142) and the tapered pins (143) from the locking shaft lever (52).
(b)
Remove the nuts (168), the washers (167), the sleeves (166) and the tapered pins (165) from the the vent door lever (162).
(c)
Remove the nuts (146), the washers (147) and the Hi-Lok pins
(144) from the lock cams (145).
(d)
Remove the vent door lever (162) and the locking shaft lever (52) from the end of the locking shaft (148).
(4)
Remove the locking shaft (148) from the cargo door structure as follows:
(a) Move the locking shaft (148) slowly through the lateral cutout of the cargo door.
NOTE : Collect the lock cams (145) during this movement.
____
R 1EFF : 106-149, 221-299, 301-399, 401-499, 1 52-32-21Page B454 1 1 Aug 01/05 1 1 1CES 1R **ON A/C 001-049, 053-099, 101-149, 151-199, 201-299, 301-399, 401-499,
TASK 52-32-21-400-011
Installation of the Locking Shaft Assembly
1. Reason for the Job
__________________
Self Explanatory
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
No specific access platform 3.5 m (11 ft. 6 in.)
B. Consumable Materials
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
Material No. 04-004 USA MIL-PRF-23827 TYPE I
SYNTH.ESTER BASED GREASE HIGH PRESSURE
(Ref. 20-31-00)
Material No. 09-016 USA MIL-PRF-81733D TYPE II CLASS B
CORROSION INHIBITING FILLET CONSISTENCY
(Ref. 20-31-00)
Material No. 15-005 AIB TN 10138 TYPE I GRADE 2 CORROSION PREVENTIVE TEMPORARY PROTECTIVE COMPOUND (Ref. 20-31-00)
Material No. 15-006 AIB TN 10138 TYPE I GRADE 3 CORROSION PREVENTIVE TEMPORARY PROTECTIVE COMPOUND (Ref. 20-31-00)
R 1EFF : 001-049, 053-099, 101-149, 151-199, 1 52-32-21Page B455 1201-299, 301-399, 401-499, 1Aug 01/05 1 1 1CES 1
C. Expendable Parts
-------------------------------------------------------------------------------
FIG.ITEM |DESIGNATION |IPC-CSN
-------------------------------------------------------------------------------
53 cotter pin 52-32-21 33 -150 53 cotter pin 52-32-21 34 -150 153 cotter pin 52-32-21 41 -020 153 cotter pin 52-32-21 42 -020 164 cotter pin 52-32-21 45 -020 164 cotter pin 52-32-21 46 -020
D. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
52-30-00-860-001 Open the FWD or AFT Cargo-Compartment Door with the Yellow Electric Pump 52-30-00-860-002 Close the FWD or AFT Cargo-Compartment Door with the
Yellow Electric Pump 52-32-00-720-001 Functional Test of the AFT Cargo-Compartment Door 52-32-11-820-002 Adjustment of the Door Mechanism
**ON A/C 001-049, 053-099, 101-105, 201-220,
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM DOORS 艙門5(138)
