(2)
Remove the deflection lever (10) from the shaft end (16) as follows:
(a)
Remove and discard the cotter pin (7) from the nut (8).
(b)
Remove the nut (8) and the washer (9) from the threaded end of the shaft end (16).
(c)
Move the deflection lever (10) and the serrated plate (11) from the shaft end (16).
(3)
Remove the shaft end (16) from the locking shaft (18) as follows:
(a)
Remove the nuts (15), the washers (14) and the tapered pins (13) from the serrated bush (12) and the end of the locking shaft (18).
(b)
Disassemble the serrated bush (12) from the shaft end (16).
(c)
Move the shaft end (16) from the locking shaft (18) and from the sliding bearing (17).
Subtask 52-32-21-020-065
B. Removal of the Locking Shaft
NOTE : Identify the installation position of the shaft levers, the
____
control lever and the interlock cam with a mark.
(1) Remove the locking shaft (18) from the cargo door as follows:
(a)
Remove the nuts (27), the washers (26) and the tapered pins (24) from the shaft levers (25),(29),(36) and the control lever (34).
(b)
Remove the nut (31), the washers (32) and the tapered pin (33) from the interlock cam (30).
(c)
Move the locking shaft (18) slowly in the aft position through the lateral cutout of the cargo door.
NOTE : Support the shaft levers (25) and (29), the control lever
____ (34) and the interlock cam (30) during this movement.
(2) Remove the shaft levers (25) and (29), the control lever (34) and the interlock cam (30) while you remove the locking shaft (18) from the sliding bearing (of each fork end).
1EFF : 051-052, 1 52-32-21Page 481 1 1 Aug 01/05R 1 1 1CES 1
(3)
Disconnect the shaft levers (25),(29),(36) from the spring unit (28) of the locking unit as follows:
(a)
Remove and discard the cotter pin (23) from the nut (22).
(b)
Remove the nut (22), the washers (20), the bush (21) and the bolt
(19) from the shaft levers (25,(29),(36).
(c)
Remove the eye end of the spring unit (28) from the fork ends of the shaft levers (25),(29),(36).
(4)
If necessary, remove the target (35) from the control lever (34) (Ref. TASK 52-35-13-000-002).
1EFF : 051-052, 1 52-32-21Page 482 1 1 Aug 01/05R 1 1 1CES 1
TASK 52-32-21-400-005
Installation of the Locking Shaft Assembly
1. Reason for the Job
__________________
Self Explanatory
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific access platform 3.5 m (11 ft. 6 in.)
B. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 04-004 USA MIL-PRF-23827 TYPE I
SYNTH.ESTER BASED GREASE HIGH PRESSURE
(Ref. 20-31-00) Material No. 15-005 AIB TN 10138 TYPE I GRADE 2
CORROSION PREVENTIVE TEMPORARY PROTECTIVE COMPOUND
(Ref. 20-31-00)
C. Expendable Parts
-------------------------------------------------------------------------------FIG.ITEM |DESIGNATION |IPC-CSN -------------------------------------------------------------------------------
6 cotter pin 52-32-21 02 -010 7 cotter pin 52-32-21 19 -010 23 cotter pin 52-32-21 16 -010
R 1EFF : 051-052, 1 52-32-21Page 483 1 1 Aug 01/05 1 1 1CES 1
D. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
52-30-00-860-001 Open the FWD or AFT Cargo-Compartment Door with the Yellow Electric Pump 52-30-00-860-002 Close the FWD or AFT Cargo-Compartment Door with the
Yellow Electric Pump 52-32-00-720-001 Functional Test of the AFT Cargo-Compartment Door 52-32-11-820-002 Adjustment of the Door Mechanism 52-35-13-400-002 Installation of the Proximity Switches 5MJ and 12MJ 52-32-21-991-006 Fig. 407
3. Job Set-up
__________
Subtask 52-32-21-865-063
A. Make sure that this(these) circuit breaker(s) is(are) open, safetied and tagged
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM DOORS 艙門5(94)
