(3) Connect the lower ball joint (40) together with the eye end (37) to the lower end of the ball bearing control (52) as follows:
 (a)
 Install the seal nut (43) on the control cable (52).

 (b)
 Install the lock nut (42), the new tab washer (41) and the lower ball joint (40) on the control cable (52).

 (c)
 Tighten the lock nut (42) with your hand. NOTE : Torque and safety the lock nut (42) ) when the drift pin

____
 mechanism is correctly adjusted.

 (4) Connect the eye end (37) on the lever (33) of the safety shaft as follows:
 (a)
 If removed, install the bush (34) on the lever (33).

 (b)
 Put the eye end (37) on the lever (33) and install the bolt (31), the washers (32) and the nut (35).

 (c)
 Tighten the nut (35) with your hand.
 NOTE : Torque and safety the nut (35) when the drift pin

____
 mechanism is correctly adjusted.

 (5) Connect the upper ball joint (67) together with the eye end (18) to the upper end of the ball bearing control (52) as follows:
 (a)
 Install the seal nut (62) on the control cable (52).

 (b)
 Install the lock nut (65), the new tab washer (64) and the upper ball joint (67) on the control cable (52).

 (c)
 Install the lock nut (68), the new tab washer (69) and the upper ball joint (67) on the control cable (52).

 (d)
 Tighten the lock nut (68) with your hand. NOTE : Torque and safety the lock nut (68) ) when the drift pin

____
 mechanism is correctly adjusted.

R 1EFF : 051-052, 1 52-32-21Page A466 1 1 Aug 01/05 1 1 1CES 1

 (6) Connect the eye end (18) to the bellcrank lever (16) as follows:
 (a)
 If removed, install the bush (17) on the bellcrank lever (16).

 (b)
 Put the eye end (18) in position on the bellcrank lever (16) and install the bolt (28), the washers (26) and the nut (25).

 (c)
 Tighten the nut (25) with your hand. NOTE : Torque and safety the nut (18) when the drift pin

____ mechanism is correctly adjusted.
R **ON A/C 106-149, 221-299, 301-399, 401-499,
 Subtask 52-32-21-420-061-B
 B. Installation of the Drift Pin Assembly
 (1) Install the drift pin (8) to the edge member bearing (9) as follows:
 (a)
 If removed, install the bush (4) in the fork end of the drift pin (8).

 (b)
 Move the drift pin (8) into the edge member bearing (9).

 (c)
 Put the linkage (6) on the drift pin (8) and attach it with the bolt (7), the washers (3) and (5) and the nut (2).

 (d) Tighten the nut (2) and safety it with the new cotter pin (1). Subtask 52-32-21-420-062-B
 C. Installation of the Linkage Assembly NOTE : The linkage assembly includes the horizontal connection rods (28),
____
 (29) and (42) and the vertical control rod (35).
 (1) Install the horizontal connection rod (42) as follows:
 (a)
 Install the rigging pin (30) into the bellcrank lever (37).

 (b)
 Install the rigging pin (38) into the bellcrank lever (40).

 (c)
 Connect the rod-end (6) to the drift pin (8) as follows: 1 If removed, install the bush (4) into the drift pin (8).

_
R 1EFF : 051-052, 106-149, 221-299, 301-399, 1 52-32-21Page A467 1401-499, 1Aug 01/05 1 1 1CES 1 (d) Connect the connecting rod (42) to the bellcrank lever (41) as follows:

 2_ Put the rod-end (6) in position at the drift pin (8) and
 attach it with the bolt (7), the washers (3) and (5) and the
 nut (2).
 3_ Safety the nut (2) with the new cotter pin (1).

 1_ Put the connecting rod (42) in position at the bellcrank lever
 (41) and attach it with the bolt (24), the washers (25) and
 the nut (26).
 2_ Safety the nut (26) with the new cotter pin (27).

 (2)
 Do the same steps again to install the connection rod (28).

 (3)
 Install the connecting rod (29) as follows:

 (a) Put the connecting rod (29) in position and connect it to the bellcrank lever (41) with the bolt (23), the washers (22) and the nut (21).
 1 Safety the nut (21) with the new cotter pin (20).
_
 (b) Connect the connecting rod (29) to the bellcrank (39) with the bolt (23), the washers (22) and the nut (26).
 1 Safety the nut (26) with the new cotter pin (20).
_
 (4) Install the vertical control rod (35) as follows:
 (a) Connect the upper fork-end of the control rod (35) to the bellcrank lever (40) as follows:
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM DOORS 艙門5(116)