Field Type 15 (cont.)
(c1)  Standard Departure Route
The designator for the Standard Departure Route from the aerodrome of departure to the first significant point on the defined route to be flown.
Note 1.— See data convention in 1.6.3.1 a) of this Appendix.
Note 2.— Element (c1) may be followed by (c3) or (c4).
Note 3.— Standard Departure Route need be included only where

appropriate.

(c2) ATS Route Designator Note 1.— See data convention in 1.6.3.1 a) of this Appendix. Note 2.— Element (c2) may be followed by (c3) or (c4) only.
(c3)  Significant Point
Note.— See alternative data conventions in 1.6.3.1 b), c), d) and e) of this Appendix.
(c4)  Significant Point/Cruising Speed and Cruising Level SIGNIFICANT POINT (as in element (c3)) OBLIQUE STROKE CRUISING SPEED OR MACH NUMBER (as in element (a)) REQUESTED CRUISING LEVEL (as in element (b)).
Field Type 15 (cont.)
(c5) Indicator
VFR  if a change to VFR is to be made at the preceding point, or
IFR if a change to IFR is to be made at the preceding point, or
DCT  if the flight to the next point will be outside a designated route, unless both points are defined by geographical coordinates or by bearing and distance.
T  if the route description is truncated at the preceding point and the remainder is to be sought in a previously transmitted FPL or other data.
Note 1.— Element (c5) may follow (c3) or (c4) and (c6) only.
Note 2.— When used, T must conclude the Route Field.
(c6) Cruise Climb
The letter C followed by an oblique stroke; then the point at which cruise climb is planned to start, expressed exactly as in (c3) above, followed by an oblique stroke; then the speed to be maintained during cruise climb expressed exactly as in (a) above followed by the two levels defining the layer to be occupied during cruise climb; each level expressed as in (b) above, or the level above which cruise climb is planned, followed by the letters PLUS, without a space between them.
(c7) Standard Arrival Route
The designator for the Standard Arrival Route from the point of leaving the defined route to the point at which the approach procedure is initiated.
Note.— Standard Arrival Route need only be included where appropriate.
Examples:  –K0410S1500 A4 CCV R11 –K0290A120  BR  614 –N0460F290 LEK2B LEK  UA6  FNE  UA6  XMM/M078F330 UA6N  PON  UR10N CHW UA5 NTS DCT 4611N00412W DCT STG UA5 FTM FATIM1A –M082F310 BCN1G BCN UG1 52N015W 52N020W 52N030W 50N040W 49N050W DCT YQX –N0420F310  R10 UB19 CGC UA25 DIN/N0420F330  UR14 IBY  UR1  MID
Field Type 16 — Destination Aerodrome and Total Estimated Elapsed Time, Alternate Aerodrome(s)
FIELD TYPE 16
* **

See Note in margin on page A3-20. 
SINGLE HYPHEN 
(a) Destination Aerodrome 
4 LETTERS, being 
the ICAO four-letter location indicator allocated to the destination aerodrome, or 
ZZZZ if no ICAO location indicator has been allocated. 
Note.— If ZZZZ is used, the name of the destination aerodrome is to be shown in the Other Information Field (see Field Type 18). * This field is to be terminated here in all message types other than ALR, FPL and SPL. ***Only in case of a diversionary landing. 

Previous  Next type 
type of  This type  of field 
field or  of field  or 
symbol  is used in  symbol 
15  ALR  18 
15  FPL  18 
13  CHG  22 
13  CNL  ) 
　
中國(guó)航空網(wǎng) m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：Rules of the Air and Air Traffic Services(145)