(a)
 Remove the inner cover-plate screws (6).

 (b)
 Remove the inner cover plates (7).

 (2)
 Pull the cord (1) up to remove the sealant from between the floor panels.

 (3)
 Remove the screws (3).

 (4)
 Remove the floor panels (4). NOTE : Identify the floor panels. This will help with the

____
 installation.

 (5)
 If you must remove the door-threshold floor panels:

 (a)
 Pull the cord (1) up to remove the sealant from between the door-threshold floor panels and the door sills.

 (b)
 Remove the screws (10).

 (c)
 Remove the door-threshold floor panels (5).

 EFF : ALL
53-42-12Page 413
May 01/04
R
 CES

 Cabin Floor Panels FR64 thru FR70 Figure 402/TASK 53-42-12-991-003-A
R  EFF : CES  ALL  53-42-12 Page 414 May 01/04 

 TASK 53-42-12-400-002
 Installation of the Cabin Floor Panels at FR64 thru FR70
 1. Reason for the Job
__________________
 Self Explanatory
 2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific  lint free cloth
 No specific nonmetallic scraper R No specific Torque Wrench : range 0.00 to 1.20 m.daN R (0.00 to 9.00 lbf.ft)
 B. Consumable Materials
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 05-002  USA MIL-P-8116 PUTTY, ZINC CHROMATE GENERAL PURPOSE (Ref. 20-31-00)
 Material No. 09-016  USA MIL-PRF-81733D TYPE II CLASS B
 CORROSION INHIBITING FILLET CONSISTENCY
 (Ref. 20-31-00)

 Material No. 11-003 USA ASTM D 740
 METHYL-ETHYL-KETONE (Ref. 20-31-00)
 Material No. 19-027 F NSA3811
 WHITE CORD-BRAIDED (NYLON) (Ref. 20-31-00)

 EFF : ALL
53-42-12Page 415

 C. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
25-21-41-000-001  Removal of the Passenger Seats
 25-21-41-400-001  Installation of the Passenger Seats
 25-28-41-000-001  Removal of the Textile Floor-Covering
 25-28-41-400-001  Installation of the Textile Floor-Covering
 25-28-42-000-001  Removal of the Non-Textile Floor Covering (NTF)
 25-28-42-400-001  Installation of the Non-Textile Floor Covering (NTF)
 25-33-41-000-001  Removal of the AFT Galley Unit (6480MM)
 25-33-41-000-002  Removal of the AFT Galley Unit (6481MM or 6483MM)
 25-33-41-400-001  Installation of the AFT Galley Unit (6480MM)
 25-33-41-400-002  Installation of the AFT Galley Unit (6481MM or
 6483MM)
 25-43-41-000-001  Removal of the Lavatory D
 25-43-41-400-001  Installation of the Lavatory D
 25-43-42-000-001  Removal of the Lavatory E
 25-43-42-400-001  Installation of the Lavatory E
 25-43-43-000-001  Removal of the Lavatory F
 25-43-43-400-001  Installation of the Lavatory F
 53-42-12-991-003-A  Fig. 402
 3. Job Set-up__________
 Subtask 53-42-12-860-051

 A. Aircraft Maintenance Configuration
 (1)
 Make sure that the AFT galley is removed (Ref. TASK 25-33-41-000-001) and/or (Ref. TASK 25-33-41-000-002).

 (2)
 Make sure that the lavatory is removed (Ref. TASK 25-43-41-000-001) and/or (Ref. TASK 25-43-42-000-001) and/or (Ref. TASK 25-43-43-000-001).

 (3)
 Make sure that the passenger seats are removed in the area as necessary (Ref. TASK 25-21-41-000-001).

 (4)
 Make sure that the textile floor covering is removed as necessary (Ref. TASK 25-28-41-000-001).

 (5)
 Make sure that the nontextile floor covering is removed as necessary (Ref. TASK 25-28-42-000-001).

 EFF : ALL
53-42-12Page 416
May 01/04
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM FUSELAGE 機身3(78)