(1) Apply STORAGE PRESERVATION (Material No. 15-005) or STORAGE PRESERVATION (Material No. 15-005A) or STORAGE PRESERVATION (Material No. 15-006) or equivalent to the sealing profile of the bulk cargo compartment door cutout at the upper corners.
 5. Close-up
________ Subtask 53-41-00-410-115
 A. Close Access
 (1)
 Make sure that the work area is clean and clear of tool(s) and other items.

 (2)
 Close the BULK cargo compartment door (Ref. TASK 52-30-00-860-008).

 (3)
 Remove the access platform(s).

 (4)
 Remove the ground support and maintenance equipment, the special and standard tools and all other items.

R  EFF : 001-049, 051-099, 101-149, 221-221, 53-41-00Page 709 224-224, 228-228, May 01/05
 CES

 Sealing Profile of Bulk Cargo Cutout at Upper Corners. Figure 702/TASK 53-41-00-991-035 
R  EFF : 001-049, 051-099, 101-149, 221-221, 224-224, 228-228,  53-41-00 Page 710 May 01/05
 CES 

 **ON A/C ALL

 TASK 53-41-00-916-003
 Apply Type I Grade 2 or 3 Temporary Protection to Cabin Floor Structure, Excluding Areas Below Galleys and Toilets and Door Entrance Area
 1. Reason for the Job
__________________
 Self Explanatory
 2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific lint free cloth No specific non metallic scraper
 B. Consumable Materials
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 11-004  USA MIL-T-81533 1.1.1TRICHLOROETHANE (METHYL CHLOROFORM) (Ref. 20-31-00)
 Material No. 15-005  AIB TN 10138 TYPE I GRADE 2 CORROSION PREVENTIVE TEMPORARY PROTECTIVE COMPOUND (Ref. 20-31-00)
 Material No. 15-005A  AIB TN 10138 TYPE I GRADE 2 CORROSION PREVENTIVE TEMPORARY PROTECTIVE COMPOUND (Ref. 20-31-00)
 Material No. 15-006  AIB TN 10138 TYPE I GRADE 3 CORROSION PREVENTIVE TEMPORARY PROTECTIVE COMPOUND (Ref. 20-31-00)
 EFF : ALL
53-41-00Page 711
May 01/04
R
 CES

 C. Referenced Information

 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
24-42-00-861-001 Energize the Ground Service Network from the External Power 24-42-00-862-001 De-energize the Ground Service Network Supplied from
 the External Power 53-32-12-000-002 Removal of the Cabin Floor Panels 53-32-12-400-002 Installation of the Cabin Floor Panels 53-42-12-000-001 Removal of the Cabin Floor Panels at FR47 thru FR64 53-42-12-400-001 Installation of the Cabin Floor Panels at FR47 thru
 FR64 53-41-00-991-036 Fig. 703
 3. Job Set-up
__________
 Subtask 53-41-00-861-050
 A. Energize the ground service network
 (Ref. TASK 24-42-00-861-001).

 Subtask 53-41-00-010-119
 B. Get Access
 (1)
 Remove the necessary equipment and furnishing to get access to the cabin floor panels.

 (2)
 Remove the necessary floor panels (Ref. TASK 53-32-12-000-002) and (Ref. TASK 53-42-12-000-001).

 Subtask 53-41-00-110-081
 C. Cleaning Procedure
 WARNING : OBEY THE MANUFACTURER'S INSTRUCTIONS WHEN YOU USE THIS/THESE
_______ MATERIAL/S. USE PROTECTIVE CLOTHING, RUBBER GLOVES, GOGGLES AND A MASK.
 EFF : ALL
53-41-00Page 712
May 01/04
R
 CES

 WARNING : MAKE SURE THAT THERE IS A GOOD FLOW OF AIR THROUGH THE WORK
_______ AREA WHEN YOU USE SPECIAL MATERIALS. IF YOU GET ONE OF THESE MATERIALS ON YOUR SKIN, IN YOUR MOUTH OR IN YOUR EYES : -FLUSH IT AWAY WITH A FLOW OF CLEAN WATER FOR BETWEEN 10 AND 15 MINUTES. -GET IMMEDIATE MEDICAL AID IF IRRITATION OCCURS. DO NOT BREATHE THE FUMES FROM THE MATERIAL. DO NOT SMOKE WHEN YOU USE THE MATERIAL. DO NOT USE THE MATERIAL NEAR A FLAME, SPARKS OR SOURCES OF HEAT. THESE MATERIALS ARE DANGEROUS : THEY ARE POISONOUS, FLAMMABLE AND SKIN IRRITANTS.
 (1) Remove the old temporary protection compound from the area to be treated with a non metallic scraper, and clean with CLEANING AGENTS (Material No. 11-004) and a lint free cloth. Make sure that the area is dry before you continue.
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM FUSELAGE 機身3(73)