EFF : ALL
53-42-12Page 409
(2) Clean the component interface and the adjacent area with CLEANING AGENTS (Material No. 11-003) and lint free cloth.
(3) Make sure that the parts retained from the removed component are clean and in the correct condition.
(4) Do an inspection of the component interface and/or the adjacent area.
(5) Examine the rubber strips (2) for good condition.
Subtask 53-42-12-420-050
B. Installation of the Floor Panels
NOTE : This procedure is applicable for all floor panels.____
(1) Make sure that the work area is clean and clear of tool(s) and other items.
(2) Put the floor panels (4) in position.
NOTE : Refer to the identification made during the removal.____
R (3) Apply the SPECIAL MATERIALS (Material No. 05-002) to the screws (3).
(4) Install the screws (3) and TORQUE to 0.42 m.daN (37.16 lbf.in).
R (5) Install the cord (1) MISCELLANEOUS (Material No. 19-027) in the gap between the floor panels.
NOTE : Make a loop at the end of the cord, this will help the next____ removal procedure.
R R (6) Apply the SEALANTS (Material No. 09-016) in the gap between the floor panels.
5. Close-up________
Subtask 53-42-12-410-050
A. Close Access
(1) Make sure that the work area is clean and clear of tool(s) and other items.
(2) Install the textile floor covering (Ref. TASK 25-28-41-400-001).
EFF : ALL
53-42-12Page 410
(3)
Install the nontextile floor covering, if removed (Ref. TASK 25-28-42-400-001).
(4)
Install the partitions (Ref. TASK 25-26-42-400-001).
(5)
Install the doghouse, if removed (Ref. TASK 25-27-46-400-001).
(6)
Install the passenger seats (Ref. TASK 25-21-41-400-001).
(7)
Remove the ground support and maintenance equipment, the special and standard tools and all other items.
EFF : ALL
53-42-12Page 411
May 01/04
R
CES TASK 53-42-12-000-002 Removal of the Cabin Floor Panels at FR64 thru FR70
1.
Reason for the Job
__________________
Self Explanatory
2.
Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
25-21-41-000-001 Removal of the Passenger Seats 25-28-41-000-001 Removal of the Textile Floor-Covering 25-28-42-000-001 Removal of the Non-Textile Floor Covering (NTF) 25-33-41-000-001 Removal of the AFT Galley Unit (6480MM) 25-33-41-000-002 Removal of the AFT Galley Unit (6481MM or 6483MM) 25-43-41-000-001 Removal of the Lavatory D 25-43-42-000-001 Removal of the Lavatory E 25-43-43-000-001 Removal of the Lavatory F 53-42-12-991-003-A Fig. 402
3. Job Set-up
__________ Subtask 53-42-12-010-051
A. Get access:
(1)
Remove the AFT galley (Ref. TASK 25-33-41-000-001) and/or (Ref. TASK 25-33-41-000-002).
(2)
Remove the lavatory (Ref. TASK 25-43-41-000-001) and/or (Ref. TASK 25-43-42-000-001) and/or (Ref. TASK 25-43-43-000-001).
(3)
Remove the passenger seats (Ref. TASK 25-21-41-000-001).
NOTE : Remove only the seats in the area as necessary.
____
(4)
Remove the nontextile floor covering, as necessary (Ref. TASK 25-28-42-000-001).
(5)
Remove the textile floor covering, as necessary (Ref. TASK 25-28-41-000-001).
EFF : ALL
53-42-12Page 412
May 01/04
R
CES 4. Procedure
_________
(Ref. Fig. 402/TASK 53-42-12-991-003-A) Subtask 53-42-12-020-052
中國航空網(wǎng) m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM FUSELAGE 機身3(77)
