Nov 01/04
R
CES
C. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
53-35-11-000-001 Removal of the Wing-to-Fuselage Fairings 53-35-11-400-001 Installation of the Wing-to-Fuselage Fairings 53-35-13-000-001 Removal of the Belly Fairing Access Panels 53-35-13-000-002 Removal of the Quick-Release Access Panels from the
Belly Fairing Structure 53-35-13-400-001 Installation of the Belly Fairing Access Panels 53-35-13-400-002 Installation of the Quick-Release Access Panels on
the Belly Fairing Structure ASRM 53-45-12-201 (for corrective action) 53-41-00-991-044 Fig. 633
3. Job Set-up
__________
Subtask 53-41-00-010-136
A. Get Access
WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION
_______
BEFORE YOU START A TASK ON OR NEAR:
-
THE FLIGHT CONTROLS
-
THE FLIGHT CONTROL SURFACES
-
THE LANDING GEAR AND THE RELATED DOORS
-COMPONENTS THAT MOVE.
(1)
Install the LOCKING TOOL - FLAP/SLAT CONTROL LEVER (98D27803000000) on the flap/slat control lever when you work near the flaps/slats.
(2)
Put a warning notice on the slat/flap control lever to tell persons not to operate the slats/flaps.
(3)
Put an adjustable access platform in position at the belly fairing.
(4)
Remove these fairings/access panels:
-
the wing-to-fuselage fairings (Ref. TASK 53-35-11-000-001),
-
the quick-release access panels (Ref. TASK 53-35-13-000-002).
-and the belly fairing access panels (Ref. TASK 53-35-13-000-001).
EFF : ALL 53-41-00Page A653
Nov 01/04
R
CES Subtask 53-41-00-110-087
B. Cleaning Procedure
WARNING : OBEY THE MANUFACTURER'S INSTRUCTIONS WHEN YOU USE THIS/THESE
_______ MATERIAL/S. USE PROTECTIVE CLOTHING, RUBBER GLOVES, GOGGLES AND A MASK.
WARNING : MAKE SURE THAT THERE IS A GOOD FLOW OF AIR THROUGH THE WORK
_______ AREA WHEN YOU USE SPECIAL MATERIALS. IF YOU GET ONE OF THESE MATERIALS ON YOUR SKIN, IN YOUR MOUTH OR IN YOUR EYES : -FLUSH IT AWAY WITH A FLOW OF CLEAN WATER FOR BETWEEN 10 AND 15 MINUTES. -GET IMMEDIATE MEDICAL AID IF IRRITATION OCCURS. DO NOT BREATHE THE FUMES FROM THE MATERIAL. DO NOT SMOKE WHEN YOU USE THE MATERIAL. DO NOT USE THE MATERIAL NEAR A FLAME, SPARKS OR SOURCES OF HEAT. THESE MATERIALS ARE DANGEROUS : THEY ARE POISONOUS, FLAMMABLE AND SKIN IRRITANTS.
(1) Clean the inspection area with CLEANING AGENTS (Material No. 11-004) and a lint free cloth.
4. Procedure
_________
(Ref. Fig. 633/TASK 53-41-00-991-044)
R **ON A/C 001-049, 051-099, 101-149, 201-299,
Subtask 53-41-00-210-104
A. Inspection
(1) Examine the the fuselage external surface and the belly fairing support structure between FR30 thru FR53, under the belly fairing for:
-corrosion,
-cracks
-and other damage.
NOTE : If necessary, refer to the ASRM (Ref. ASRM 53-45-12-201) for
____
the correct repair procedure.
Fuselage External Surface inside the Belly Fairing and Belly Fairing Support Structure Figure 633/TASK 53-41-00-991-044
EFF : ALL 53-41-00Page A655 Nov 01/04 R CES
R **ON A/C 151-199, 401-499,
Subtask 53-41-00-210-104-A
A. Examine the the fuselage external surface and the belly fairing support structure between FR27 and FR57, under the belly fairing for:
-corrosion,
-cracks
-and other damage.
NOTE : If necessary, refer to the ASRM (Ref. ASRM 53-45-12-201) for the
____
correct repair procedure.
**ON A/C 301-399,
Subtask 53-41-00-210-104-B
A. Inspection
(1) Examine the the fuselage external surface and the belly fairing support structure between FR35.3 thru FR48, under the belly fairing for:
-corrosion,
-cracks
-and other damage.
NOTE : If necessary, refer to the ASRM (Ref. ASRM 53-45-12-201) for
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM FUSELAGE 機身3(24)
