EFF : ALL
53-51-00Page 680
May 01/03

 MAINTENANCE PLATFORM - REMOVAL/INSTALLATION
___________________________________________
 TASK 53-51-17-000-001
 Removal of the Maintenance Platform Panels (AFT Equipment Compartment)

 1.
 Reason for the Job

__________________
 Self Explanatory

 2.
 Job Set-up Information

______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific access platform 3.5 m (11 ft. 6 in.)
 B. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
53-51-17-991-001 Fig. 401
 3. Job Set-up
__________ Subtask 53-51-17-010-050
 A. Get Access
 (1)
 Put the access platform in position.

 (2)
 Open the access door 312AR.

 EFF : ALL
53-51-17Page 401

 4. Procedure
_________

 (Ref. Fig. 401/TASK 53-51-17-991-001) Subtask 53-51-17-020-050
 A. Removal of the Maintenance Platform Panels:
 (1)
 Remove the Screws (1)

 (2)
 Remove the panels (2).

 EFF : ALL
53-51-17Page 402

 Maintenance Platform Panels
 Figure 401/TASK 53-51-17-991-001
 EFF :  ALL  53-51-17 Page 403 
Feb 01/98
 CES 

 TASK 53-51-17-400-001
 Installation of the Maintenance Platform Panels (AFT Equipment Compartment)

 1. Reason for the Job
__________________
 Self Explanatory
 2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific  clean cloth
 B. Consumable Materials
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 05-002  USA MIL-P-8116
 PUTTY, ZINC CHROMATE GENERAL PURPOSE (Ref. 20-31-00) Material No. 08-064 USA MIL-W-5044 TYPE I
 ANTI-SLIP SURFACING (FLEX.) (Ref. 20-31-00)
 Material No. 11-004  USA MIL-T-81533 1.1.1TRICHLOROETHANE (METHYL CHLOROFORM) (Ref. 20-31-00)
 C. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
53-51-17-991-001  Fig. 401
 EFF : ALL
53-51-17Page 404

 3. Job Set-up
__________ Subtask 53-51-17-860-050
 A. Aircraft Maintenance Configuration
 (1) Make sure that the aircraft is in the same configuration as for the removal task.
 4. Procedure
_________
 (Ref. Fig. 401/TASK 53-51-17-991-001) Subtask 53-51-17-110-050
 A. Preparation for Installation:
 (1) Clean the component interface and the adjacent area with CLEANING AGENTS (Material No. 11-004) and a clean cloth.
 WARNING : USE SOLVENTS/CLEANING AGENTS, SEALANTS AND OTHER SPECIAL
_______ MATERIALS ONLY WITH A GOOD SUPPLY OF AIR. OBEY THE MANUFACTURERS INSTRUCTIONS. PUT ON PROTECTIVE CLOTHING. DO NOT GET THEM IN YOUR MOUTH. DO NOT SMOKE. DO NOT BREATHE THE GAS. THESE MATERIALS ARE POISONOUS, FLAMMABLE AND SKIN IRRITANT. GET MEDICAL HELP IF YOUR SKIN OR EYES BECOME IRRITATED.
 WARNING : OBEY THE MANUFACTURER'S INSTRUCTIONS WHEN YOU USE THE
_______
 SPECIAL MATERIAL.
 THIS MATERIAL IS DANGEROUS.

 (2) Make sure that the parts retained from the removed component are clean and in the correct condition.
 (3) Do an inspection of the component interface and/or the adjacent area. Subtask 53-51-17-420-050
 B. Installation of the Maintenance Platform Panels:
 (1)
 Make sure that the work area is clean and clear of tool(s) and other items.

 (2)
 Put the panels (2) in position.

 EFF : ALL
53-51-17Page 405

 (3)
 Apply SPECIAL MATERIALS (Material No. 05-002) to the screws (1).

 (4)
 Install the screws (1).
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM FUSELAGE 機身3(118)