Detailed Visual Inspection of the Escape Chute Slide Compartment Internal Structure Between FR47.2A and FR47.4 from Stringer 24 to Stringer 28 LH/RH
 1. Reason for the Job
__________________
 Refer to the MPD TASK: 534187-01
 2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
 -------------------------------------------------------------------------------
No specific lint-free cloth
 No specific adjustable platform 2.2 m (7 ft. 3 in.)

 B. Consumable Materials
 -------------------------------------------------------------------------------
REFERENCE DESIGNATION
 -------------------------------------------------------------------------------
R Material No. 11-003 USA ASTM D 740 METHYL-ETHYL-KETONE (Ref. 20-31-00) Material No. 15-005 AIB TN 10138 TYPE I GRADE 2 CORROSION PREVENTIVE TEMPORARY PROTECTIVE COMPOUND (Ref. 20-31-00) Material No. 15-006 AIB TN 10138 TYPE I GRADE 3 CORROSION PREVENTIVE TEMPORARY PROTECTIVE COMPOUND (Ref. 20-31-00)
 C. Referenced Information
 -------------------------------------------------------------------------------
REFERENCE DESIGNATION
 -------------------------------------------------------------------------------
25-62-47-000-001 Escape-Slide Enclosure - Removal 25-62-47-400-001 Escape-Slide Enclosure - Installation 51-75-13-916-002 Repair to a layer of Corrosion Preventive Compound ASRM 53-41-11-101 (for corrective action)

 3. Job Set-up
__________
 Subtask 53-41-00-010-134
 A. Get Access
 WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION
_______
 BEFORE YOU START A TASK ON OR NEAR:

 -
THE FLIGHT CONTROLS

 -
THE FLIGHT CONTROL SURFACES

 -
THE LANDING GEAR AND THE RELATED DOORS

 -COMPONENTS THAT MOVE.
 (1) Put the adjustable platform in position below the emergency-exit escape chute.
 WARNING : OBEY THE MANUFACTURER'S INSTRUCTIONS WHEN YOU USE THE
_______
 SPECIAL MATERIAL.
 THIS MATERIAL IS DANGEROUS.

 WARNING : USE SOLVENTS/CLEANING AGENTS, SEALANTS AND OTHER SPECIAL
_______ MATERIALS ONLY WITH A GOOD SUPPLY OF AIR. OBEY THE MANUFACTURERS INSTRUCTIONS. PUT ON PROTECTIVE CLOTHING. DO NOT GET THEM IN YOUR MOUTH. DO NOT SMOKE. DO NOT BREATHE THE GAS. THESE MATERIALS ARE POISONOUS, FLAMMABLE AND SKIN IRRITANT. GET MEDICAL HELP IF YOUR SKIN OR EYES BECOME IRRITATED.
 (2)
 Remove the escape slide enclosure (Ref. TASK 25-62-47-000-001).

 (3)
 Clean the inspection area with CLEANING AGENTS (Material No. 11-003) and a lint-free cloth.

 4. Procedure
_________
 Subtask 53-41-00-210-102
 A. Inspection
 (1) Do a detailed visual inspection of the escape chute compartment internal structure between FR47.2A and FR47.4 from the stringer 24 thru stringer 28 LH and RH for:
 -corrosion,
 -cracks,
 -loose or missing rivets.

 NOTE : If necessary,refer to the ASRM (Ref. ASRM 53-41-11-101) for
____
 the correct repair procedure.

 5. Close-up
________ Subtask 53-41-00-916-077
 A. Apply STORAGE PRESERVATION (Material No. 15-005) STORAGE PRESERVATION (Material No. 15-006) to the inspection area (Ref. TASK 51-75-13-916-002).
 Subtask 53-41-00-410-132
 B. Close Access
 (1)
 Install the escape slide enclosure (Ref. TASK 25-62-47-400-001).

 (2)
 Remove the access platform(s).

 (3)
 Remove the warning notice(s).

 (4)
 Remove the ground support and maintenance equipment, the special and standard tools and all other items.

 **ON A/C ALL
 TASK 53-41-00-210-801
 General Visual Inspection of Cabin Floor Structure, excluding Areas below Galleys and Toilets and Door Entrance Area, from FR47 to FR70
 1. Reason for the Job
__________________
 Refer to the MPD TASK: 534146-01
 2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific  lint free cloth
 B. Consumable Materials
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
　
中國航空網(wǎng) m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機(jī)維護(hù)手冊 AMM FUSELAGE 機(jī)身3(22)