-
the top surface of the fuselage skin, below the vertical stabilizer.
NOTE : If necessary, refer to the ASRM (Ref. ASRM 535100000) for the
____
correct repair procedure.
EFF : ALL
53-51-00Page 668
Fuselage External Surface and Vertical Stabilizer Attachment Fittings Below Vertical Stabilizer/Fuselage Fairings R Figure 617/TASK 53-51-00-991-018
EFF : ALL
53-51-00Page 669
May 01/03
5. Close-up
________ Subtask 53-51-00-916-064
A. Application of the Temporary Protective Compound
(1) Apply STORAGE PRESERVATION (Material No. 15-005) or STORAGE PRESERVATION (Material No. 15-005A) or STORAGE PRESERVATION (Material No. 15-006) or equivalent to the fuselage skin and the vertical-stabilizer attachment fittings, below the vertical stabilizer/fuselage fairings.
Subtask 53-51-00-410-072
B. Close Access
(1)
Make sure that the work area is clean and clear of tool(s) and other items.
(2)
Install the vertical stabilizer fairings 323AL, 323AR (Ref. TASK 53-55-11-400-001).
(3)
Remove the warning notice(s).
(4)
Remove the access platform(s).
(5)
Remove the ground support and maintenance equipment, the special and standard tools and all other items.
EFF : ALL
53-51-00Page 670
R TASK 53-51-00-210-020
R General Visual Inspection of the Rear Fuselage Internal Structure, between FR70
R and FR77
R WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU_______
R START A TASK ON OR NEAR:
R - THE FLIGHT CONTROLS
R - THE FLIGHT CONTROL SURFACES
R - THE LANDING GEAR AND THE RELATED DOORS
R - COMPONENTS THAT MOVE.
R WARNING : MAKE SURE THAT THE TRAVEL RANGES OF THE FLIGHT CONTROLS ARE CLEAR._______
R MOVEMENT OF FLIGHT CONTROLS CAN CAUSE INJURY TO PERSONS AND/OR
R DAMAGE.
R 1. Reason for the Job__________________
R Self Explanatory
R 2. Job Set-up Information______________________
R A. Fixtures, Tools, Test and Support Equipment
R -------------------------------------------------------------------------------
R REFERENCE QTY DESIGNATION
R -------------------------------------------------------------------------------
R No specific 1 ACCESS PLATFORM 3M (10 FT)- ADJUSTABLE
R No specific 1 ACCESS PLATFORM 5M (16 FT)- ADJUSTABLE
R No specific 1 WARNING NOTICE
R B. Consumable Materials
R -------------------------------------------------------------------------------
R REFERENCE DESIGNATION
R -------------------------------------------------------------------------------
R Material No. 11-004 USA MIL-T-81533
R 1.1.1TRICHLOROETHANE (METHYL CHLOROFORM)
R (Ref. 20-31-00)
R Material No. 19-003 USA AMS 3819
R LINT-FREE COTTON CLOTH (Ref. 20-31-00)
EFF : ALL
53-51-00Page 671
May 01/03
R C. Referenced Information
R -------------------------------------------------------------------------------R REFERENCE DESIGNATION R -------------------------------------------------------------------------------
R 51-74-11-300-001 Repair of Corroded Areas
R 51-75-12-300-001 Repair of Major Paint Damage on Light Alloy and
R Composite Material
R 51-75-12-300-003 Repair of Minor Paint Damage (Topcoat Only)
R ASRM 51-22-00-001
R ASRM 51-23-11-001
R 53-51-00-991-020 Fig. 618
R 3. Job Set-up__________
R Subtask 53-51-00-010-076
R A. Get Access
R (1) Put a WARNING NOTICE in position to tell persons not to operate the
R APU.
R (2) Put the ACCESS PLATFORM 3M (10 FT)- ADJUSTABLE in position below the
R access door 312AR.
R (3) Put the ACCESS PLATFORM 5M (16 FT)- ADJUSTABLE in position below the
R access door 314AR.
R (4) Open the access doors 312AR, 314AR.
中國航空網(wǎng) m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機(jī)維護(hù)手冊 AMM FUSELAGE 機(jī)身3(115)
