Bottom Corners of the Aft Passenger/Crew Door-Cutouts Figure 618/TASK 53-41-00-991-021
R EFF : CES ALL 53-41-00 Page 676 Feb 01/02
NOTE : If necessary, refer to the ASRM (Ref. ASRM 53-41-11-101) for
____
the correct repair procedure.
5. Close-up
________ Subtask 53-41-00-410-094
A. Close Access
(1)
Make sure that the work area is clean and clear of tool(s) and other items.
(2)
Install the corner scuff plates at the AFT passenger/crew doors (Ref. TASK 53-45-15-400-001).
(3)
Remove the ground support and maintenance equipment, the special and standard tools and all other items.
EFF : ALL
53-41-00Page 677
Feb 01/02
R
CES TASK 53-41-00-210-025
Detailed Visual Inspection of AFT Cargo Door Eccentric Bolts of Locking
Mechanism at Lock Fittings between FR53 and FR55A (6 places)
1.
Reason for the Job
__________________
Refer to the MPD TASK: 534155-01
2.
Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
No specific access platform 2.8 m (9 ft. 2 in.)
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
52-30-00-860-001 Open the FWD or AFT Cargo-Compartment Door with the Yellow Electric Pump
52-30-00-860-002 Close the FWD or AFT Cargo-Compartment Door with the Yellow Electric Pump
R 52-32-32-000-001 Removal of the Lock Fitting Components 52-32-32-400-001 Installation of the Lock Fitting Components ASRM 51-11-00-001 (for corrective action) ASRM 51-22-00-001 (for corrective action) 53-41-00-991-023 Fig. 619
3. Job Set-up
__________
Subtask 53-41-00-010-096
A. Get Access
(1)
Open the AFT cargo-compartment door (Ref. TASK 52-30-00-860-001).
(2)
Put the access platform in position adjacent to the aft cargo-compartment door-cutout.
(3)
Remove the eccentric bolts (Ref. TASK 52-32-32-000-001).
EFF : ALL
53-41-00Page 678
4. Procedure
_________ (Ref. Fig. 619/TASK 53-41-00-991-023) Subtask 53-41-00-210-080
A. Inspection
(1)
Do a detailed visual inspection of the eccentric bolts.
(2)
Make sure that there is no:
(a)
Corrosion damage:
-If you find corrosion damage, refer to the Structural Repair Manual (Ref. ASRM 51-22-00-001) for types, inspection, removal and corrosion protection.
(b)
Other damage (for example, cracks, scratches, marks, dents, bumps):
-If you find other types of damage, refer to the Structural Repair Manual (Ref. ASRM 51-11-00-001) for damage classification and corrective action.
5. Close-up
________ Subtask 53-41-00-410-097
A. Close Access
(1)
Install the eccentric bolts (Ref. TASK 52-32-32-400-001).
(2)
Make sure that the work area is clean and clear of tool(s) and other items.
(3)
Remove the access platform(s).
(4)
Close the AFT cargo-compartment door (Ref. TASK 52-30-00-860-002).
(5)
Remove the ground support and maintenance equipment, the special and standard tools and all other items.
EFF : ALL
53-41-00Page 679
Feb 01/02
R
CES
Eccentric Bolts on the Locking Mechanism Fittings at the AFT Cargo-Compartment
中國航空網(wǎng) m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護(hù)手冊 AMM FUSELAGE 機身3(7)
