(2)
 Close the bulk cargo-compartment door (Ref. TASK 52-30-00-860-008).

 (3)
 Remove the ground support and maintenance equipment, the special and standard tools and all other items.

R  EFF : 001-049, 051-099, 101-149, 221-221, 53-41-00Page A669 224-224, 228-228, May 01/05
 CES

 **ON A/C ALL

 TASK 53-41-00-210-806

 Detailed Visual Inspection of the Fuselage Skin External Surface between FR64 and FR70 from Stringer 6 to Crown Center Line LH and RH
 1. Reason for the Job
__________________
 Refer to the MPD TASK: 534128-01
 2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific  lint-free cloth
 B. Consumable Materials
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
R Material No. 11-003  USA ASTM D 740 METHYL-ETHYL-KETONE (Ref. 20-31-00)
 C. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
53-45-11-000-001 Removal of the Dorsal Fin 321AL
 53-45-11-400-001 Installation of the Dorsal Fin 321AL
 ASRM 51-11-00-001
 ASRM 51-22-00-001
 ASRM 51-73-00-001 (for corrective action)
 ASRM 51-74-00-001 (for corrective action)
 53-41-00-991-049 Fig. 636

 3. Job Set-up
__________

 Subtask 53-41-00-010-140
 A. Get Access
 (1) Remove the dorsal fin 321AL (Ref. TASK 53-45-11-000-001).
 WARNING : OBEY THE MANUFACTURER'S INSTRUCTIONS WHEN YOU USE THE
_______
 SPECIAL MATERIAL.
 THIS MATERIAL IS DANGEROUS.

 WARNING : USE SOLVENTS/CLEANING AGENTS, SEALANTS AND OTHER SPECIAL
_______ MATERIALS ONLY WITH A GOOD SUPPLY OF AIR. OBEY THE MANUFACTURERS INSTRUCTIONS. PUT ON PROTECTIVE CLOTHING. DO NOT GET THEM IN YOUR MOUTH. DO NOT SMOKE. DO NOT BREATHE THE GAS. THESE MATERIALS ARE POISONOUS, FLAMMABLE AND SKIN IRRITANT. GET MEDICAL HELP IF YOUR SKIN OR EYES BECOME IRRITATED.
 (2) Clean the inspection area with CLEANING AGENTS (Material No. 11-003) and a lint-free cloth.
 4. Procedure
_________
 (Ref. Fig. 636/TASK 53-41-00-991-049)
 Subtask 53-41-00-210-108
 A. Detailed Visual Inspection of the Fuselage Skin External Surface between FR64 and FR70 from Stringer 6 to Crown Center Line LH and RH
 (1)
 Do a visual inspection of the outer surface of the inspection area. Look for damage, and defects in the shape of the external surface.

 (2)
 If you find damage :

 (a)
 Refer to the ASRM (Ref. ASRM 51-11-00-001) for the classification of the damage.

 (b)
 If you find corrosion damage:

 -
refer to the ASRM (Ref. ASRM 51-22-00-001) for the general corrosion data

 -
refer to the ASRM (Ref. ASRM 51-74-00-001) for the repair of the corroded areas.

 EFF : ALL 53-41-00Page A671

Nov 01/04
R
 CES

 Fuselage External Surface - FR64 to FR70 from Stringer 6 to Crown Center Line
 Figure 636/TASK 53-41-00-991-049

 EFF : ALL 53-41-00Page A672 Nov 01/04 R CES

 (c) If you find other types of damage:
 -Refer to the ASRM (Ref. ASRM 51-73-00-001) for the repair of the minor damage.
 5. Close-up
________ Subtask 53-41-00-410-138
 A. Close Access
 (1)
 Make sure that the work area is clean and clear of tool(s) and other items.

 (2)
 Install the dorsal fin 321AL (Ref. TASK 53-45-11-400-001).

 (3)
 Remove the ground support and maintenance equipment, the special and standard tools and all other items.

 EFF : ALL 53-41-00Page A673

Nov 01/04
R
 CES  TASK 53-41-00-210-807

 General Visual Inspection of Upper Skin of Longitudinal Lap Joints, including Crack Stopper Areas at Stringer 6, LH/RH between FR 47 (FR47/51) and FR 70
 WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU
_______ START A TASK ON OR NEAR:
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM FUSELAGE 機身3(28)