WARNING : MAKE SURE THAT THERE IS A GOOD FLOW OF AIR THROUGH THE WORK
_______ AREA WHEN YOU USE SPECIAL MATERIALS. IF YOU GET ONE OF THESE MATERIALS ON YOUR SKIN, IN YOUR MOUTH OR IN YOUR EYES : -FLUSH IT AWAY WITH A FLOW OF CLEAN WATER FOR BETWEEN 10 AND 15 MINUTES. -GET IMMEDIATE MEDICAL AID IF IRRITATION OCCURS. DO NOT BREATHE THE FUMES FROM THE MATERIAL. DO NOT SMOKE WHEN YOU USE THE MATERIAL. DO NOT USE THE MATERIAL NEAR A FLAME, SPARKS OR SOURCES OF HEAT. THESE MATERIALS ARE DANGEROUS : THEY ARE POISONOUS, FLAMMABLE AND SKIN IRRITANTS.
 (1) Clean the area with a lint-free cotton cloth MISCELLANEOUS (Material No. 19-003) and the CLEANING AGENTS (Material No. 11-004), and let the area dry.
 4. Procedure
_________
 **ON A/C 001-049, 051-099, 101-149, 201-299, 301-399,
 (Ref. Fig. 651/TASK 53-41-00-991-076)
R **ON A/C 151-199, 401-499,
 (Ref. Fig. 651A/TASK 53-41-00-991-076-A)
 **ON A/C 001-049, 051-099, 101-149, 201-299, 301-399,
 Subtask 53-41-00-210-120
 A. Inspection
 (1) Examine the following area for scratches, dents and cracks:
 -the upper skin of the longitudinal lap joints, including the crack stopper areas at stringer 41 RH between FR 51 and FR 58.
 NOTE : If necessary, refer to the ASRM (Ref. ASRM 53-41-11-101) for
____
 the allowable damage limits.

 NOTE : If necessary, refer to the ASRM (Ref. ASRM 53-41-11-201) for
____
 the correct repair procedure.

 Upper Skin of the Longitudinal Lap Joint at STGR 41 RH Figure 651/TASK 53-41-00-991-076 
R  EFF : 001-049, 051-099, 101-149, 201-299, 301-399,  53-41-00 Page B643 May 01/05
 CES 

 Upper Skin of the Longitudinal Lap Joint at STGR 41 RH Figure 651A/TASK 53-41-00-991-076-A 
R  EFF :  151-199, 401-499,  53-41-00 Page B644 Aug 01/05
 CES 

R **ON A/C 151-199, 401-499,
 Subtask 53-41-00-210-120-A
 A. Inspection
 (1) Examine the following area for scratches, dents and cracks:
 -the upper skin of the longitudinal lap joints, including the crack stopper areas at stringer 41 RH between FR 47/51 and FR 58.
 NOTE : If necessary, refer to the ASRM (Ref. ASRM 53-41-11-101) for
____
 the allowable damage limits.

 NOTE : If necessary, refer to the ASRM (Ref. ASRM 53-41-11-201) for
____
 the correct repair procedure.

 **ON A/C ALL
 5. Close-up
________
 Subtask 53-41-00-942-100

 A. Remove the ground support equipment.
 (1)
 Make sure that the work area is clean and clear of tool(s) and other items.

 (2)
 Remove the warning notice(s).

 (3)
 Remove the access platform(s).

 TASK 53-41-00-210-819
 General Visual Inspection of AFT Cargo Door Actuator Attach Bracket, between Floor Beams
 WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU
_______ START A TASK ON OR NEAR:
 -
THE FLIGHT CONTROLS

 -
THE FLIGHT CONTROL SURFACES

 -
THE LANDING GEAR AND THE RELATED DOORS

 -COMPONENTS THAT MOVE.
 WARNING : WEAR AND ATTACH A SAFETY HARNESS WHEN YOU WORK ON HIGH SECTIONS. A
_______ FALL CAN INJURE OR KILL YOU.
 1. Reason for the Job
__________________
 Refer to the MPD TASK: 534163-01
 2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific  1 ACCESS PLATFORM 3M (10 FT)- ADJUSTABLE
 B. Consumable Materials
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 11-004  USA MIL-T-81533 1.1.1TRICHLOROETHANE (METHYL CHLOROFORM) (Ref. 20-31-00)
 Material No. 19-003  USA AMS 3819 LINT-FREE COTTON CLOTH (Ref. 20-31-00)  C. Referenced Information

 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
28-11-27-000-001 Removal of the Additional Center Tank (ACT) 28-11-27-000-003 Removal of the Additional Center Tank No2 (ACT2) 28-11-27-000-004 Removal of the Additional Center Tank No3 (ACT3) 28-11-27-400-001 Installation of the Additional Center Tank (ACT) 28-11-27-400-003 Installation of the Additional Center Tank No2 (ACT2) 28-11-27-400-004 Installation of the Additional Center Tank No3 (ACT3) 52-30-00-860-001 Open the FWD or AFT Cargo-Compartment Door with the
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM FUSELAGE 機身3(43)