-COMPONENTS THAT MOVE.
(2)
Put the access platform in position adjacent to FR47.5 LH and RH.
(3)
Clean the inspection area with CLEANING AGENTS (Material No. 11-004) and a lint-free cloth.
4. Procedure
_________ (Ref. Fig. 630/TASK 53-41-00-991-039) Subtask 53-41-00-210-095
A. Inspection
(1) Do a detailed visual inspection of the skin in the circumferential splice and the stringer coupling areas at FR47.5 from the STGR16 LH/RH to the crown centerline, external.
NOTE : If necessary, refer to the ASRM (Ref. ASRM 53-00-12-201) for
____
the correct repair procedure.
5. Close-up
________ Subtask 53-41-00-410-123
A. Close Access
(1)
Remove the access platform(s).
(2)
Remove the warning notice(s).
EFF : 301-399, 53-41-00Page A626
Nov 01/04
R
CES
Frame Splice at FR47.5 Stringer 16 LH and RH to Crown Center Line Figure 630/TASK 53-41-00-991-039
EFF : 301-399, 53-41-00Page A627 Nov 01/04 R CES
(3) Remove the ground support and maintenance equipment, the special and
standard tools and all other items.
EFF : 301-399, 53-41-00Page A628
Nov 01/04
R
CES TASK 53-41-00-210-044
Detailed Visual Inspection of the Aft Emergency Skin Cutouts Upper and Lower Corners, External Surface LH/RH
1.
Reason for the Job
__________________
Refer to the MPD TASK: 534176-01
2.
Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
No specific lint-free cloth
No specific adjustable platform 3.2 m (10 ft. 6 in.)
B. Consumable Materials
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
R Material No. 11-003 USA ASTM D 740 METHYL-ETHYL-KETONE (Ref. 20-31-00)
C. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
ASRM 53-31-11-101 (for corrective action) 3. Job Set-up
__________
Subtask 53-41-00-010-128
A. Get Access
WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION
_______
BEFORE YOU START A TASK ON OR NEAR:
-
THE FLIGHT CONTROLS
-
THE FLIGHT CONTROL SURFACES
-
THE LANDING GEAR AND THE RELATED DOORS
-COMPONENTS THAT MOVE.
(1) Put the adjustable platform in position below the emergency exit.
WARNING : OBEY THE MANUFACTURER'S INSTRUCTIONS WHEN YOU USE THE
_______
SPECIAL MATERIAL.
THIS MATERIAL IS DANGEROUS.
WARNING : USE SOLVENTS/CLEANING AGENTS, SEALANTS AND OTHER SPECIAL
_______ MATERIALS ONLY WITH A GOOD SUPPLY OF AIR. OBEY THE MANUFACTURERS INSTRUCTIONS. PUT ON PROTECTIVE CLOTHING. DO NOT GET THEM IN YOUR MOUTH. DO NOT SMOKE. DO NOT BREATHE THE GAS. THESE MATERIALS ARE POISONOUS, FLAMMABLE AND SKIN IRRITANT. GET MEDICAL HELP IF YOUR SKIN OR EYES BECOME IRRITATED.
(2) Clean the inspection area with CLEANING AGENTS (Material No. 11-003) and a lint-free cloth.
4. Procedure
_________
Subtask 53-41-00-210-097
A. Inspection
(1) Examine the skin cutouts at the upper and lower corners of the aft emergency exit for:
-cracks,
-corrosion,
-skin distortion,
-surface damage.
NOTE : If necessary, refer to the ASRM (Ref. ASRM 53-31-11-101) for
____
the correct repair procedure.
EFF : 301-399, 53-41-00Page A630
Nov 01/04
R
CES
5. Close-up
________
Subtask 53-41-00-410-126
A. Close Access
(1)
Remove the access platform(s).
(2)
Remove the warning notice(s).
(3)
Remove the ground support and maintenance equipment, the special and standard tools and all other items.
EFF : 301-399, 53-41-00Page A631
Nov 01/04
R
CES
TASK 53-41-00-210-045 中國航空網 m.k6050.com 航空翻譯 www.aviation.cn 本文鏈接地址：A320飛機維護手冊 AMM FUSELAGE 機身3(18)
