(2)
 Connect the hydraulic connectors (3) and (5).

 (3)
 Connect the electrical connectors (1).

 (4)
 Make sure that the work area is clean and clear of tool(s) and other items.

 Subtask 32-43-31-865-052
 C. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s): 1GG, 2GG, 3GG, 4GG, 70GG, 71GG, 3801GX, 3802GX, 3803GX
 Subtask 32-43-31-860-052
 D. Aircraft Configuration
 (1) Connect the isolation coupling of the PTU (Ref. TASK 29-23-00-860-002).
 Subtask 32-43-31-870-050
 E. Bleed the Brake System
 (1) Bleed the alternate brake system (Ref. TASK 32-43-00-870-002).
R 1EFF : 001-049, 051-099, 101-149, 151-199, 1 32-43-31Page 412 1201-299, 301-399, 1Aug 01/05 1 1 1CES 1 Subtask 32-43-31-710-050

 F. Test
 **ON A/C 001-002, 051-052,

 (Ref. Fig. 401/TASK 32-43-31-991-001) R **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 301-399, Post SB 32-1190 For A/C 001-002,051-052, (Ref. Fig. 402/TASK 32-43-31-991-004) R **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 301-399,
 (1)
 Do an operational test of the alternate brake system (Ref. TASK 32-43-00-710-001).

 (2)
 Make sure that there are no hydraulic leaks at the hydraulic connectors (3) and (5).

 5. Close-up
________
 Subtask 32-43-31-942-050

 A. Removal of Equipment
 (1)
 Make sure that the work area is clean and clear of tool(s) and other items.

 (2)
 Remove the safety barriers.

 (3)
 Remove the warning notice(s).

 (4)
 Remove the access platform(s).

 (5)
 Remove the ground support and maintenance equipment, the special and standard tools and all other items.

R 1EFF : 001-049, 051-099, 101-149, 151-199, 1 32-43-31Page 413 1201-299, 301-399, 1Aug 01/05 1 1 1CES 1 TASK 32-43-31-000-002

 Removal of the Alternate-Brake Servovalve Manifold Filter
 WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU
_______ START A TASK ON OR NEAR:
 -
THE FLIGHT CONTROLS

 -
THE FLIGHT CONTROL SURFACES

 -
THE LANDING GEAR AND THE RELATED DOORS

 -COMPONENTS THAT MOVE.
 WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING
_______ GEAR.
 1. Reason for the Job
__________________
 Self Explanatory
 2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION
 -------------------------------------------------------------------------------
No specific circuit breaker(s) safety clip(s)
 No specific safety barriers
 No specific warning notice
 No specific access platform 3 m (9 ft. 10 in.)
 No specific container 5 l (1.3208 USgal)

R 1EFF : 001-049, 051-099, 101-149, 151-199, 1 32-43-31Page 414 1201-299, 301-399, 1Aug 01/05 1 1 1CES 1

 B. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
29-00-00-864-001 29-23-00-860-001 32-00-00-481-001  Put the Related Hydraulic System in the Depressurized Configuration before Maintenance ActionDisconnection of the Isolation Coupling of the Power Transfer Unit (PTU)Installation of the Safety Devices on the Landing Gears
 **ON A/C 001-002, 051-052,
 32-43-31-991-002  Fig. 403 
R  **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 301-399,
 Post SB  32-1190 For A/C 001-002,051-052,
 32-43-31-991-003  Fig. 404 
R  **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 301-399,
 3. Job Set-up__________
 **ON A/C 001-002, 051-052,
 (Ref. Fig. 403/TASK 32-43-31-991-002) 
R  **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 301-399,
 Post SB  32-1190 For A/C 001-002,051-052,
 (Ref. Fig. 404/TASK 32-43-31-991-003) 

R 1EFF : 001-049, 051-099, 101-149, 151-199, 1 32-43-31Page 415 1201-299, 301-399, 1Aug 01/05 1 1 1CES 1

 Alternate-Brake Servovalve Manifold Filter Detail
 Figure 403/TASK 32-43-31-991-002

R 1EFF : 001-002, 051-052, 1 32-43-31Page 416 1 1 May 01/05 1 1 1CES 1
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM LANDING GEAR 起落架7(95)