Subtask 32-44-00-860-051
B. Aircraft Maintenance Configuration
(1)
On the panel 400VU, make sure that the landing-gear control lever is in the DOWN position.
(2)
On the panel 110VU, make sure that the Parking Brake Control-Switch is in the OFF position.
(3)
Make sure that the CAPT and F/O brake pedals are released.
(4)
Energize the aircraft electrical circuits (Ref. TASK 24-41-00-861-002).
(5)
Make sure that the Green and Yellow hydraulic systems are depressurized.
(6)
Do the check of the accumulator charging pressure: 100 bars at 20 deg.C (1450 PSI at 68 deg.F) (Ref. TASK 32-44-11-200-001).
(7)
On the overhead panel 40VU, push and release the PTU/AUTO pushbutton switch. Make sure that the OFF legend comes on.
(8)
On the overhead panel 40VU, push and release the YELLOW/ELEC PUMP pushbutton switch to pressurize the brake accumulator system to 206 bars (2988 PSI). The brake accumulator pressure is shown on the ACCU PRESS indication on the triple pressure indicator on the panel 400VU.
(9)
On the panel 110VU, put the Parking Brake Control-Switch in the ON position.
(10) On the overhead panel 40VU, push and release the YELLOW/ELEC PUMP pushbutton switch. Do no other action on the Alternate Braking system for at least one hour. Do not push the brake pedals during this time.
NOTE : This is to make sure that the fluid temperature is almost the
____
same as the ambient temperature.
(11) On the panel 110VU, put the Parking Brake control-switch in the OFF position.
R 1EFF : 001-049, 051-099, 101-105, 151-199, 1 32-44-00Page 507 1201-210, 1Aug 01/05 1 1 1CES 1
(12) On the overhead panel 40VU, push and release the YELLOW/ELEC PUMP pushbutton switch to pressurize the brake accumulator system to 206 bars (2988 PSI). The brake accumulator pressure is shown on the ACCU PRESS indication on the triple pressure indicator on the panel 400VU.
(13) On the overhead panel 40VU, push and release the YELLOW/ELEC PUMP pushbutton switch. **ON A/C ALL
Post SB 32-1215 For A/C 001-049,051-099,101-105,151-199,201-210, Subtask 32-44-00-860-051-A
B. Aircraft Maintenance Configuration
(1)
On the panel 400VU, make sure that the landing-gear control lever is in the DOWN position.
(2)
On the panel 110VU, make sure that the Parking Brake Control-Switch is in the OFF position.
(3)
Make sure that the CAPT and F/O brake pedals are released.
(4)
Energize the aircraft electrical circuits (Ref. TASK 24-41-00-861-002).
(5)
Make sure that the Green and Yellow hydraulic systems are depressurized.
(6)
Do the check of the accumulator charging pressure: 70 bars at 20 deg.C (1015 PSI at 68 deg.F) (Ref. TASK 32-44-11-200-001).
(7)
On the overhead panel 40VU, push and release the PTU/AUTO pushbutton switch. Make sure that the OFF legend comes on.
(8)
On the overhead panel 40VU, push and release the YELLOW/ELEC PUMP pushbutton switch to pressurize the brake accumulator system to 206 bars (2988 PSI). The brake accumulator pressure is shown on the ACCU PRESS indication on the triple pressure indicator on the panel 400VU.
(9)
On the panel 110VU, put the Parking Brake Control-Switch in the ON position.
1EFF : ALL 1 32-44-00Page 508 1 1 Aug 01/05 1 1 1CES 1
(10) On the overhead panel 40VU, push and release the YELLOW/ELEC PUMP pushbutton switch. Do no other action on the Alternate Braking system for at least one hour. Do not push the brake pedals during this time.
NOTE : This is to make sure that the fluid temperature is almost the
____
same as the ambient temperature.
(11)
On the panel 110VU, put the Parking Brake control-switch in the OFF position.
(12)
On the overhead panel 40VU, push and release the YELLOW/ELEC PUMP pushbutton switch to pressurize the brake accumulator system to 206 bars (2988 PSI). The brake accumulator pressure is shown on the ACCU PRESS indication on the triple pressure indicator on the panel 400VU.
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM LANDING GEAR 起落架7(120)
