(4)
 Remove the blanking caps from the check valve (3).

 (5)
 Apply HYDRAULIC FLUIDS (Material No. 02-003) to the O-ring (4) and install the new O-ring (4) on the check valve (3).

 (6)
 Remove the blanking caps from the open ports of the manifold (5).

 (7)
 Make sure that the interfaces of the check valve (3) are clean and in the correct condition.

 Subtask 32-42-77-420-050
 B. Installation of the Normal Brake-Return Check-Valve
 (1)
 Apply HYDRAULIC FLUIDS (Material No. 02-003) to the threads of the check valve (3) and install the check valve (3) on the manifold (5).

 (2)
 TORQUE the normal brake-return check-valve (3) to between 5.4 and 5.9 m.daN (39.82 and 43.51 lbf.ft).

 1EFF : ALL 1 32-42-77Page 408 1 1 Feb 01/98 1 1 1CES 1

 (3)
 Remove the blanking plug from the check valve (3) and coupling nut (2).

 (4)
 Apply HYDRAULIC FLUIDS (Material No. 02-003) to the threads of the coupling nut (2).

 (5)
 Connect the coupling nut (2) to the check valve (3).

 (6)
 TORQUE the coupling nut (2) to between 5.4 and 5.9 m.daN (39.82 and

 43.51 lbf.ft). Subtask 32-42-77-865-051
 C. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s): 1GG, 2GG, 3GG, 4GG.
 Subtask 32-42-77-860-051
 D. Preparation for Test
 (1)
 Pressurize the Green hydraulic reservoir (Ref. TASK 29-14-00-614-002).

 (2)
 Pressurize the Green hydraulic system (Ref. TASK 29-10-00-863-001).

 (3)
 Energize the aircraft electrical circuits (Ref. TASK 24-41-00-861-002).

 Subtask 32-42-77-710-050
 E. Test
 (1)
 Do an operational test of the normal brake system. (Ref. TASK 32-42-00-710-001)

 (2)
 Examine the applicable check valve (3) for leaks.

 1EFF : ALL 1 32-42-77Page 409 1 1 Feb 01/98 1 1 1CES 1

 5. Close-up
________ Subtask 32-42-77-860-052
 A. Aircraft Configuration
 (1)
 Depressurize the Green hydraulic system (Ref. TASK 29-00-00-864-001).

 (2)
 Depressurize the applicable hydraulic reservoir (Ref. TASK 29-14-00-614-001).

 (3)
 De-energize the aircraft electrical circuits (Ref. TASK 24-41-00-862-002).

 Subtask 32-42-77-942-052
 B. Removal of Equipment
 (1)
 Make sure that the work area is clean and clear of tool(s) and other items.

 (2)
 Remove the safety barriers.

 (3)
 Remove the warning notice(s).

 (4)
 Remove the access platform(s).

 (5)
 Remove the container.

 (6)
 Remove the ground support and maintenance equipment, the special and standard tools and all other items.

 1EFF : ALL 1 32-42-77Page 410 1 1 Feb 01/98 1 1 1CES 1 ALTERNATE BRAKING WITH ANTI SKID - DESCRIPTION AND OPERATION

____________________________________________________________
 1. General
_______ (Ref. Fig. 001) The Alternate braking with anti skid associates the Yellow high pressure with the anti skid regulation. You get this mode automatically:
 -if Green pressure is not available or falls during braking,
 - or if certain failures occur on the Normal system (Ref. 32-42-00).
 A hydraulic selector causes changes between the Green and Yellow systems
 automatically.
 You control only with the pedals. An auxiliary low-pressure hydraulic-system
 transmits the orders. The pressure supplied to the left and right brakes is
 shown on a brake Yellow-pressure triple-indicator installed on the center
 instrument panel.
 The anti skid system and related indicating are operative.
 This braking mode uses the second set of pistons of the brake unit.

 1EFF : 001-049, 051-099, 101-149, 151-199, 1 32-43-00Page 1 1201-299, 301-399, 1Config-1 Aug 01/05 1 1 1CES 1

 INTENTIONALLY BLANK

 1 1
32-43-00Page 2
1 1 Config-1 Aug 01/05 1 1 1CES 1

 Alternate Braking with Anti Skid
 Figure 001

 1EFF : 001-049, 051-099, 101-149, 151-199, 1 32-43-00Page 3/4 1201-299, 301-399, 1Config-1 Aug 01/05 1 1 1CES

 2. Component Location
__________________
 **ON A/C 001-002, 051-052,
 (Ref. Fig. 002)
R **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 301-399,
 Post SB 32-1190 For A/C 001-002,051-052,
 (Ref. Fig. 002A)
R **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 301-399,
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM LANDING GEAR 起落架7(50)