Inspection for Corrosion Figure 602/TASK 32-43-14-991-002- 12 (SHEET 1)
R 1EFF : 001-049, 051-099, 101-149, 151-199, 1 32-43-14Page 612 1201-299, 301-399, 1Aug 01/05 1 1 1CES 1
Inspection for Corrosion Figure 602/TASK 32-43-14-991-002- 22 (SHEET 2)
R 1EFF : 001-049, 051-099, 101-149, 151-199, 1 32-43-14Page 613 1201-299, 301-399, 1Aug 01/05 1 1 1CES 1 Subtask 32-43-14-942-055
D. Remove the warning notice(s).
Subtask 32-43-14-710-053
E. Do the operational test of the alternate braking system with anti-skid (Ref. TASK 32-43-00-710-001).
R **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 301-399,
5. Close-up
________ R **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 301-399, Post SB 32-1199 For A/C 001-049,051-058,101-101, R Subtask 32-43-14-410-055
A. Close Access
(1)
Make sure that the work area is clean and clear of tool(s) and other items.
(2)
Install the belly fairing panel 148FB, (Ref. TASK 53-35-13-400-001).
(3)
Remove the access platform(s).
(4)
Make sure that the work area is clean and clear of tool(s) and other items.
(5) Close the MLG doors (Ref. TASK 32-12-00-410-001).
Subtask 32-43-14-862-052
B. De-energize the ground service network
(Ref. TASK 24-42-00-862-001).
R 1EFF : 001-049, 051-099, 101-149, 151-199, 1 32-43-14Page 614 1201-299, 301-399, 1Aug 01/05 1 1 1CES 1 SAFETY VALVE - ALTERNATE BRAKE (2620GM,2621GM,2622GM,2623GM) - SERVICING
________________________________________________________________________
TASK 32-43-16-600-001
Reactivation of the Alternate-Brake Safety-Valve
WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU
_______ START A TASK ON OR NEAR:
-
THE FLIGHT CONTROLS
-
THE FLIGHT CONTROL SURFACES
-
THE LANDING GEAR AND THE RELATED DOORS
-COMPONENTS THAT MOVE.
WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING
_______ GEAR.
1. Reason for the Job__________________
Self Explanatory
2. Job Set-up Information______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
No specific bleed hose No specific lint-free cloth No specific container 1 l (0.2641 USgal) No specific access platform 2.5 m (8 ft. 2 in.) No specific Torque Wrench : range 1.00 to 10.00 m.daN
(8.00 to 75.00 lbf.ft)
R 1EFF : 001-049, 051-099, 101-149, 151-199, 1 32-43-16Page 301 1201-299, 301-399, 1Aug 01/05 1 1 1CES 1 B. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 11-026 GB DEF-STAN 68-148/1
SOLVENT GENERAL PURPOSE (Ref. 20-31-00)
Material No. 19-003 USA AMS 3819
LINT-FREE COTTON CLOTH (Ref. 20-31-00)
Material No. 19-010 USA AMS 5687
LOCKWIRE STAINLESS STEEL ANNEALED 0.8MM DIA
(Ref. 20-31-00)
C. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
32-43-00-710-001 Operational Check of Alternate Braking System
32-43-00-870-002 Bleeding of the High Pressure Alternate Braking
System
**ON A/C 001-002, 051-052,
32-43-16-991-002 Fig. 301
R **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 301-399,
Post SB 32-1190 For A/C 001-002,051-052,
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM LANDING GEAR 起落架7(83)
