1EFF : ALL 1 32-42-36Page 410 1 1 May 01/05 1 1 1CES 1

 (5) Lubricate the new packings (2), the new back-up rings (3), the new packing (6), the new retainer (7), the new back-up ring (8) and the new packing (9) with HYDRAULIC FLUIDS (Material No. 02-003).
 Subtask 32-42-36-420-050
 B. Installation of the Normal Brake Safety-Valve R **ON A/C 001-002, 051-052,
 (Ref. Fig. 401/TASK 32-42-36-991-001) **ON A/C ALL R Post SB 32-1190 For A/C 001-002,051-052, (Ref. Fig. 402/TASK 32-42-36-991-005) **ON A/C ALL
 WARNING : DO NOT LET OIL STAY ON YOUR SKIN FOR A LONG TIME AS IT CAN
_______
 CAUSE INJURY.

 CAUTION : MAKE SURE THAT THE FLUID DOES NOT STAY ON THE AIRCRAFT
_______ STRUCTURE. IF THE FLUID GETS ON THE AIRCRAFT STRUCTURE, WASH IT OFF IMMEDIATELY WITH SOAP AND WATER.
 (1)
 Install the packings (2) and the back-up rings (3) on the bobbin (4).

 (2)
 Install the packings (6) and (9), the retainer (7) and the back-up ring (8) on the filter (5).

 (3)
 Install the bobbin (4) and the filter (5) in the normal brake manifold.

 (4)
 Carefully install the normal brake safety-valve (1) on the normal brake manifold. Make sure that you do not cause damage to:

 -
the packings (2), (6) and (9)

 -
the back-up rings (3) and (8)

 -
the retainer (7)

 -
the bobbin (4)

 -
the filter (5).

 (5)
 Install the bolts (10) and TORQUE to between 0.7 and 0.85 m.daN

 (61.94 and 75.22 lbf.in).
 1EFF : ALL 1 32-42-36Page 411 1 1 May 01/05 1 1 1CES 1 Subtask 32-42-36-865-052

 C. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s): 1GG, 2GG, 3GG, 4GG.
 Subtask 32-42-36-860-059
 D. Aircraft Maintenance Configuration
 (1)
 Remove the warning notices to tell persons not to pressurize the green and the yellow hydraulic systems

 (2)
 Remove the warning notices to tell persons not to pressurize the green and the yellow hydraulic system reservoirs.

 WARNING : MAKE SURE THAT THE TRAVEL RANGES OF THE FLIGHT CONTROL
_______ SURFACES ARE CLEAR BEFORE YOU PRESSURIZE/DEPRESSURIZE A HYDRAULIC SYSTEM.
 WARNING : MAKE SURE THAT THE CONTROLS AGREE WITH THE POSITION OF THE
_______ ITEMS THEY OPERATE BEFORE YOU PRESSURIZE A HYDRAULIC SYSTEM.
 (3)
 Pressurize the Green hydraulic system
 (Ref. TASK 29-10-00-863-001).

 (4)
 Pressurize the Yellow hydraulic system
 (Ref. TASK 29-10-00-863-002).

 (5)
 Make sure that the Green and the Yellow hydraulic system reservoirs are pressurized (Ref. TASK 29-14-00-614-002).

 Subtask 32-42-36-870-053
 E. Bleed the Braking System
 (1) Bleed the Normal Braking System (Ref. TASK 32-42-00-870-001).
 1EFF : ALL 1 32-42-36Page 412 1 1 Nov 01/04 1 1 1CES 1 Subtask 32-42-36-710-053

 F. Test
 (1)
 Do an operational test of the Normal Braking system (Ref. TASK 32-42-00-710-001).

 (2)
 Make sure that there are no hydraulic leaks at the interface of the normal brake manifold and the normal brake safety-valve.

 5. Close-up
________ Subtask 32-42-36-942-053
 A. Removal of Equipment
 (1)
 Make sure that the work area is clean and clear of tool(s) and other items.

 (2)
 Remove the safety barriers.

 (3)
 Remove the warning notice(s).

 (4)
 Remove the access platform(s).

 (5)
 Remove the ground support and maintenance equipment, the special and standard tools and all other items.

 1EFF : ALL 1 32-42-36Page 413 1 1 Nov 01/04 1 1 1CES 1

 TRANSMITTER UNIT - BRAKE PEDAL (9GG) - REMOVAL/INSTALLATION
___________________________________________________________ TASK 32-42-47-000-001 Removal of the Transmitter Unit - Brake Pedal (9GG) WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING
_______ GEAR.
 1.
 Reason for the Job

__________________
 Self Explanatory

 2.
 Job Set-up Information

______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific blanking plugs No specific circuit breaker(s) safety clip(s) No specific warning notices No specific access platform 1.8 m (5 ft. 11 in.) 98A27901002000 2 PIN, RIGGING - RUDDER CONTROL
　
中國航空網(wǎng) m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機(jī)維護(hù)手冊 AMM LANDING GEAR 起落架7(31)