C. Get access
 (1)
 Put the access platform in position at the access door 811.

 (2)
 Open the access door 811.

 4. Procedure
_________
 (Ref. Fig. 401/TASK 32-43-11-991-001) Subtask 32-43-11-860-050
 A. Draining of the Brake Control Hydraulic Reservoir
 (1)
 Put a container near the brake control reservoir (2624GM).

 (2)
 Remove the plug (8) and the seal (7) from the valve (6).

 (3)
 Install a FILLER ADAPTOR TMH DI43-32-00 or equivalent on the valve (6).

 NOTE : Before you connect the filler adaptor to the valve (6), turn
____ the knob fully to the left to make sure that the striker is fully rearward.
 (4)
 Connect a bleed hose on the filler adaptor and put the other end in the container.

 (5)
 Use the knob on the filler adaptor to move the striker forward to bleed the brake control reservoir.

 NOTE : You must do this operation with a smooth movement to prevent
____
 damage to the valve mechanism.

 (6)
 When the brake control reservoir is bled, turn the knob fully to the left to move the striker rearward.

 (7)
 Remove the bleed hose, the filler adaptor and the container.

 (8)
 Install the seal (7) and the plug (8) on the valve (6).

R 1EFF : 001-049, 051-099, 101-149, 151-199, 1 32-43-11Page 402 1201-299, 301-399, 1Aug 01/05 1 1 1CES 1

 Brake Control Hydraulic Reservoir
 Figure 401/TASK 32-43-11-991-001

R 1EFF : 001-049, 051-099, 101-149, 151-199, 1 32-43-11Page 403 1201-299, 301-399, 1Aug 01/05 1 1 1CES 1 Subtask 32-43-11-020-051

 B. Removal of the Brake Control Reservoir
 (1)
 Disconnect the drain hose (13) from the bleed screw (15).

 (2)
 Remove and discard the washer seal (14).

 (3)
 Disconnect the hydraulic hose (12) from the brake control reservoir (1).

 (4)
 Put blanking plugs on the disconnected line ends.

 (5)
 Hold the brake control reservoir (1), remove the nuts (5), the bolts

 (2) and the washers (3).

 (6)
 Remove the brake control reservoir (1).

 (7)
 On the brake control reservoir (1), remove and retain the union (11).

 (8)
 Remove and discard the packing (10).

 (9)
 Install the blanking plugs on the bleed screw (15) and on the union

 (9) of the brake control reservoir (1).
R 1EFF : 001-049, 051-099, 101-149, 151-199, 1 32-43-11Page 404 1201-299, 301-399, 1Aug 01/05 1 1 1CES 1 TASK 32-43-11-400-001

 Installation of the Brake Control Hydraulic Reservoir
 1. Reason for the Job
__________________
 Self Explanatory
 2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION
 -------------------------------------------------------------------------------
No specific access platform 2.0 m (6 ft. 7 in.)
 No specific Torque Wrench : range 0.00 to 1.20 m.daN

 (0.00 to 9.00 lbf.ft) No specific Torque Wrench : range 0.20 to 3.60 m.daN
 (2.00 to 26.00 lbf.ft)
 B. Consumable Materials
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 02-003 F NSA 307110 TYPE 4
 HYDRAULIC FLUID (PHOSPHATE ESTER BASE)
 (Ref. 20-31-00)
 C. Expendable Parts
 -------------------------------------------------------------------------------FIG.ITEM |DESIGNATION |IPC-CSN -------------------------------------------------------------------------------
10 packing 32-43-01 02 -060 14 washer-seal 32-43-01 01A-150
R 1EFF : 001-049, 051-099, 101-149, 151-199, 1 32-43-11Page 405 1201-299, 301-399, 1Aug 01/05 1 1 1CES 1

 D. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
24-42-00-861-001 Energize the Ground Service Network from the External Power 32-43-00-612-001 Filling and bleeding of the Low Pressure Control
 System of the Alternate Braking 32-43-00-710-001 Operational Check of Alternate Braking System 32-43-11-991-001 Fig. 401
 3. Job Set-up
__________ Subtask 32-43-11-860-051
 A. Aircraft Maintenance Configuration
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM LANDING GEAR 起落架7(71)