(3)
 Remove the bracket attach bolts (6) and the nuts (7).

 (4)
 Remove the nuts (13) and the bolts (12) and release the handle (11) from the burr-strip (9).

 (5)
 Remove the bolts (14), the nuts (15) and the clamps (16) and the rigid control assembly (4).

 (6)
 Remove the old sealant from the bolts (6) and (12) and the nuts (7) and (13).

R  EFF : 001-049, 051-099, 101-149, 151-199, 25-62-43Page 419 201-299, 401-499, Aug 01/05
 CES

R  **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 401-499,
 TASK 25-62-43-400-002
 Installation of the Rigid Control Assembly
 1. Reason for the Job
__________________
 Self Explanatory
 2. Job Set-up Information
______________________
 A. Consumable Materials
 -------------------------------------------------------------------------------
REFERENCE  DESIGNATION
 -------------------------------------------------------------------------------
Material No. 09-018  USA AMS 3267/3
 CORROSION INHIBITING LOW ADHESION SEALANT
 (Ref. 20-31-00)

 Material No. 19-010  USA AMS 5687
 LOCKWIRE STAINLESS STEEL ANNEALED 0.8MM DIA
 (Ref. 20-31-00)

 B. Expendable Parts
 -------------------------------------------------------------------------------
FIG.ITEM |DESIGNATION  |IPC-CSN
 -------------------------------------------------------------------------------
1 cotter pin 25-62-04 10 -070A 1 cotter pin 25-62-04 10A-070 8 cotter pins 25-62-43 01 -080
R  EFF : 001-049, 051-099, 101-149, 151-199, 25-62-43Page 420 201-299, 401-499, Aug 01/05
 CES  C. Referenced Information

 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
21-20-00-010-001 Removal of the Air-Conditioning Distribution Ducts 21-20-00-410-001 Installation of the Air-Conditioning Distribution
 Ducts
 25-21-41-000-001 Removal of the Passenger Seats
 25-21-41-400-001 Installation of the Passenger Seats
 25-23-47-000-002 Removal of the Upper Sidewall Panel Assy 241LW,

 (242LW), 241CW, (242CW) and 241FW, (242FW) 25-23-47-400-002 Installation of the Upper Sidewall Panel Assy 241LW,
 (242LW), 241CW, (242CW) and 241FW, (242FW)
 25-23-48-000-001 Removal of the Cove Light Panels
 25-23-48-400-001 Installation of the Cove Light Panels
 25-62-00-081-001 Special Precautions after Work on the Offwing

 Escape-Slide Systems
 25-62-00-481-001 Special Precautions before Work on the Offwing
 Escape-Slide Systems

R  **ON A/C 001-049, 051-099, 101-105, 151-199, 201-209, 401-499,
 25-62-43-991-002 Fig. 402
 **ON A/C 106-149, 210-299,
 25-62-43-991-002-A Fig. 402A
R  **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 401-499,
 3. Job Set-up
__________
 Subtask 25-62-43-860-052
 A. Get Access
 (1)
 Make sure that the off-wing escape-slide system is safetied (Ref. TASK 25-62-00-481-001).

 (2)
 Make sure that the passenger seats in the area of the emergency exits are removed as necessary (Ref. TASK 25-21-41-000-001).

R  EFF : 001-049, 051-099, 101-149, 151-199, 25-62-43Page 421 201-299, 401-499, Aug 01/05
 CES

 (3)
 Make sure that the cove light panels 241KW (242KW) and 241GW (242GW) are removed (Ref. TASK 25-23-48-000-001).

 (4)
 Make sure that emergency-exit frame linings 241JW (242JW) and 241FW (242FW) are removed (Ref. TASK 25-23-47-000-002).

 (5)
 Make sure that the air conditioning duct is removed as necessary (Ref. TASK 21-20-00-010-001).

 4. Procedure
_________
R  **ON A/C 001-049, 051-099, 101-105, 151-199, 201-209, 401-499,
 (Ref. Fig. 402/TASK 25-62-43-991-002)
 **ON A/C 106-149, 210-299,
 (Ref. Fig. 402A/TASK 25-62-43-991-002-A)
R  **ON A/C 001-049, 051-099, 101-105, 151-199, 201-209, 401-499,
 Subtask 25-62-43-420-051
 A. Install the Rigid Control Assembly:
 (1)
 Put the rigid control assembly (4) in position.

 (2)
 Apply the new sealant

 WARNING : MAKE SURE THAT THERE IS A GOOD FLOW OF AIR THROUGH THE WORK
_______ AREA WHEN YOU USE SPECIAL MATERIALS. IF YOU GET ONE OF THESE MATERIALS ON YOUR SKIN, IN YOUR MOUTH OR IN YOUR EYES : -FLUSH IT AWAY WITH A FLOW OF CLEAN WATER FOR BETWEEN 10 AND 15 MINUTES. -GET IMMEDIATE MEDICAL AID IF IRRITATION OCCURS. DO NOT BREATHE THE FUMES FROM THE MATERIAL. DO NOT SMOKE WHEN YOU USE THE MATERIAL. DO NOT USE THE MATERIAL NEAR A FLAME, SPARKS OR SOURCES OF HEAT. THESE MATERIALS ARE DANGEROUS : THEY ARE POISONOUS, FLAMMABLE AND SKIN IRRITANTS.
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM EQUIPMENT/FURNISHINGS 設備4(90)