(b)
 Install the screws (14) and the nuts (16).

 (5)
 Install the tie-down fitting (18):

 (a)
 Put the tie-down fitting (18) in position at the structure (3).

 (b)
 Install the screws (17) and the nuts (19).

 (6)
 Install the tie-down fitting (21):

 (a)
 Put the tie-down fitting (21) in position at the structure (3).

 (b)
 Install the screws (20) and the nuts (22).

 (7)
 Install the tie-down fitting (24):

 (a)
 Put the tie-down fitting (24) in position at the structure (3).

 (b)
 Install the screws (23) and the nuts (25).

 (8)
 Install the tie-down fittings (27): NOTE : The installation procedure for all the tie-down fittings (27)

____ is the same. Therefore, the installation procedure for one tie-down fitting (27) only is given here.
R  EFF : 062-099, 106-149, 151-199, 203-299, 25-55-41Page 448 401-499, Aug 01/05
 CES

 (a)
 Put the tie-down fitting (27) in position at the structure (3).

 (b)
 Install the screws (26) and the nuts (28).

 (9) Install the tie-down fittings (30): NOTE : The installation procedure for all the tie-down fittings (30)
____ is the same. Therefore, the installation procedure for one tie-down fitting (30) only is given here.
 (a)
 Put the tie-down fitting (30) in position at the structure (3).

 (b)
 Install the screws (29) and the nuts (31).

 (10)
 Install the tie-down fitting (33):

 (a)
 Put the tie-down fitting (33) in position at the structure (3).

 (b)
 Install the screws (32) and the nuts (34).

 (11)
 Install the tie-down fitting (36):

 (a)
 Put the tie-down fitting (36) in position at the structure (3).

 (b)
 Install the screws (35) and the nuts (37).

 (12)
 Install the cargo net(s) (5), if removed:

 (a)
 Put the cargo net(s) (5) in position at the applicable net attachment fittings of the cargo-compartment floor and ceiling areas.

 (b)
 Connect the net fittings (6) to the net attachment fittings.

R  EFF : 062-099, 106-149, 151-199, 203-299, 25-55-41Page 449 401-499, Aug 01/05
 CES

 **ON A/C 301-399,

 Subtask 25-55-41-420-050-B
 B. Installation of the Tie-Down and Net Attachment Fittings in the Floor Area of the AFT Cargo-Compartment (Ref. Fig. 401B/TASK 25-55-41-991-001-B)
 (1) Install the tie-down points (2): NOTE : The installation procedure for all the tie-down points (2) is
____ the same. Therefore, the installation procedure for one tie-down point (2) only is given here.
 (a)
 Put the tie-down point (2) in position at the structure (3).

 (b)
 Install the screws (1) and the nuts (4).

 (2) Install the tie-down points (8): NOTE : The installation procedure for all the tie-down points (8) is
____ the same. Therefore, the installation procedure for one tie-down point (8) only is given here.
 (a)
 Put the plug housing (9) in position at the structure (3), if removed.

 (b)
 Put the tie-down point (8) in position at the plug housing (9).

 (c)
 Install the screws (7) and the nuts (10).

 (3) Install the tie-down fittings (12): NOTE : The installation procedure for all the tie-down fittings (12)
____ is the same. Therefore, the installation procedure for one tie-down fitting (12) only is given here.
 (a)
 Put the tie-down fitting (12) in position at the structure (3).

 (b)
 Install the screws (11) and the nuts (13).

 (4) Install the tie-down fittings (15): NOTE : The installation procedure for all the tie-down fittings (15)
____ is the same. Therefore, the installation procedure for one tie-down fitting (15) only is given here.

 (a)
 Put the tie-down fitting (15) in position at the structure (3).

 (b)
 Install the screws (14) and the nuts (16).

 (5) Install the tie-down fittings (18): NOTE : The installation procedure for all the tie-down fittings (18)
____ is the same. Therefore, the installation procedure for one tie-down fitting (18) only is given here.
 (a)
 Put the tie-down fitting (18) in position at the structure (3).
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM EQUIPMENT/FURNISHINGS 設備4(51)