(2)
 Install the parts wich you removed to replace the insulation blankets.

 (3)
 Remove the access platform(s).

 (4)
 Remove the actuator safety locks and close the FWD and/or AFT cargo compartment door (Ref. TASK 52-30-00-860-002).

 EFF : ALL
25-80-00Page 207

 TASK 25-80-00-340-001 Repair of the Insulation Blankets
 1.
 Reason for the Job

__________________
 Self Explanatory

 2.
 Job Set-up Information

______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific adhesive strip (DAN 382-50)
 No specific VELCRO adhesive tape (DAN 98S2A)
 No specific VELCRO adhesive tape (DAN 98S2B)
 No specific access platform 2.1 m (6 ft. 11 in.)

 B. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
52-30-00-860-001  Open the FWD or AFT Cargo-Compartment Door with the Yellow Electric Pump 52-30-00-860-002 Close the FWD or AFT Cargo-Compartment Door with the Yellow Electric Pump 25-80-00-991-002 Fig. 202
 3. Job Set-up
__________ Subtask 25-80-00-010-053
 A. Get Access
 (1)
 Open the FWD and/or AFT cargo compartment door and install the actuator safety locks (Ref. TASK 52-30-00-860-001).

 (2)
 Put the access platform in position at the opening of the FWD and/or AFT cargo compartment door(s).

 (3)
 Remove the equipment, the linings and the sidewall panels as necessary.

 EFF : ALL
25-80-00Page 208

 4. Procedure
_________ R (Ref. Fig. 202/TASK 25-80-00-991-002) Subtask 25-80-00-340-051
 A. Repair of the Insulation Blankets
 (1)
 If the VELCRO adhesive tape at the insulation blanket (1) is damaged,install new VELCRO adhesive tape (DAN 98S2A)

 (2)
 If the VELCRO adhesive tape at the structure is damaged,install new VELCRO adhesive tape (DAN 98S2B)

 (3)
 If the insulation blanket has tears repair it as follow:

 (a)
 Use adhesive strip (DAN 382-50).

 (b)
 Cut a large patch (2) of adhesive strip to cover an area much larger than the damaged area.

 (c)
 Remove the protection foil from the adhesive strip.

 (d)
 Put the patch (2) in position and press it down.

 5. Close-up
________
 Subtask 25-80-00-410-053

 A. Close Access
 (1)
 Make sure that the work area is clean and clear of tool(s) and other items.

 (2)
 Install the parts wich you removed to replace the insulation blankets.

 (3)
 Remove the access platform(s).

 (4)
 Remove the actuator safety locks and close the FWD and/or AFT cargo compartment door (Ref. TASK 52-30-00-860-002).

 EFF : ALL
25-80-00Page 209

 Repair of the Insulations Blankets
 Figure 202/TASK 25-80-00-991-002
 EFF :  ALL  25-80-00 Page 210 
Feb 01/98
 CES 

 INSULATION (THERMAL AND ACOUSTICAL) - REPAIRS
_____________________________________________
 TASK 25-80-00-200-001
 General Repair Information
 1. Reason for the Job
__________________
 Self Explanatory
 2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------
REFERENCE  QTY DESIGNATION
 -------------------------------------------------------------------------------
No specific 1 GLOVES - RUBBER
 No specific 1 GOGGLES - PROTECTIVE

 B. Referenced Information
 -------------------------------------------------------------------------------
REFERENCE  DESIGNATION
 -------------------------------------------------------------------------------
24-42-00-861-001 Energize the Ground Service Network from the External Power 24-42-00-862-001 De-energize the Ground Service Network Supplied from
 the External Power
 25-80-00-000-001 Removal of the Insulation Blankets
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM EQUIPMENT/FURNISHINGS 設備4(186)