(c)
 If necessary, remove the plug housing (9) from the structure (3).

 (4) Remove the tie-down fittings (12): NOTE : The removal procedure for all the tie-down fittings (12) is
____ the same. Therefore, the removal procedure for one tie-down fitting (12) only is given here.
 (a)
 Remove the nuts (13), and remove the screws (11) from the tie-down fitting (12).

 (b)
 Remove the tie-down fitting (12) from the structure (3).

 EFF : 001-049, 051-099, 101-149, 203-299, 25-55-41Page 423

Aug 01/05
R
 CES

 Tie-Down and Net Attachment Fittings - BULK Cargo-Compartment Floor Area Figure 403/TASK 25-55-41-991-003- 12 (SHEET 1)
R  EFF : 001-049, 051-099, 101-149, 221-221, 25-55-41Page 424 224-224, 228-228, May 01/05
 CES

 Tie-Down and Net Attachment Fittings - BULK Cargo-Compartment Floor Area Figure 403/TASK 25-55-41-991-003- 22 (SHEET 2)
R  EFF : 001-049, 051-099, 101-149, 221-221, 25-55-41Page 425 224-224, 228-228, May 01/05
 CES

 Tie-Down and Net Attachment Fittings - BULK Cargo-Compartment Floor Area Figure 403A/TASK 25-55-41-991-003-B
R EFF : 151-199, 25-55-41Page 426 May 01/04
 CES

 Tie-Down and Net Attachment Fittings - BULK Cargo-Compartment Floor Area Figure 403B/TASK 25-55-41-991-003-A
R  EFF : 201-220, 222-223, 225-227, 229-299, 25-55-41Page 427 301-399, Feb 01/05
 CES

 (5) Remove the seat-track sections (15): NOTE : The removal procedure for all the seat-track sections (15) is
____ the same. Therefore, the removal procedure for one seat-track section (15) only is given here.
 (a)
 Remove the nuts (16), and remove the screws (14) from the seat-track section (15).

 (b)
 Remove the seat-track section (15) from the structure (3).

 (6)
 Remove the tie-down fitting (18):

 (a)
 Remove the nuts (19), and remove the screws (17) from the tie-down fitting (18).

 (b)
 Remove the tie-down fitting (18) from the structure (3).

 (7)
 Remove the tie-down fittings (21): NOTE : The removal procedure for all the tie-down fittings (21) is

____ the same. Therefore, the removal procedure for one tie-down fitting (21) only is given here.
 (a)
 Remove the nuts (22), and remove the screws (20) from the tie-down fitting (21).

 (b)
 Remove the tie-down fitting (21) from the structure (3).

 (8)
 Remove the tie-down fitting (24):

 (a)
 Remove the nuts (25), and remove the screws (23) from the tie-down fitting (24).

 (b)
 Remove the tie-down fitting (24) from the structure (3).

 (9)
 Remove the tie-down fitting (27):

 (a)
 Remove the nuts (28), and remove the screws (26) from the tie-down fitting (27).

 (b)
 Remove the tie-down fitting (27) from the structure (3).

 (3)
 Remove the tie-down points (8): NOTE : The removal procedure for all the tie-down points (8) is the

R  **ON A/C 151-199, 201-202, 301-399, 401-499,
 Subtask 25-55-41-020-052-A
 C. Removal of the Tie-Down and Net Attachment Fittings from the Floor Area of the BULK Cargo-Compartment
 **ON A/C 151-199,
 (Ref. Fig. 403A/TASK 25-55-41-991-003-B)
 **ON A/C 201-202, 301-399,
 (Ref. Fig. 403B/TASK 25-55-41-991-003-A) 
R  **ON A/C 401-499, 
R  (Ref. Fig. 403C/TASK 25-55-41-991-003-C) 
R  **ON A/C 151-199, 201-202, 301-399, 401-499,
 (1) Remove the cargo net(s) (5), if installed:
 (a) Disconnect the net fittings (6) from the applicable net attachment fittings of the cargo-compartment floor and ceiling areas.
 (b) Remove the cargo net(s) (5).
 (2) Remove the tie-down points (2):
 NOTE : The removal procedure for all the tie-down points (2) is the____ same. Therefore, the removal procedure for one tie-down point (2) only is given here.
 (a) Remove the nuts (4), and remove the screws (1) from the tie-down point (2).
 (b) Remove the tie-down point (2) from the structure (3). 

R  Tie-Down and Net Attachment Fittings - BULK Cargo-Compartment Floor Area 
R  Figure 403C/TASK 25-55-41-991-003-C 
R  EFF :  401-499,  25-55-41 Page 430 
Aug 01/05
 CES 

____ same. Therefore, the removal procedure for one tie-down point
 (8) only is given here.
　
中國航空網(wǎng) m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機(jī)維護(hù)手冊 AMM EQUIPMENT/FURNISHINGS 設(shè)備4(46)