(Ref. Fig. 403/TASK 25-55-11-991-003) R **ON A/C 151-199, 401-499,
 (Ref. Fig. 403A/TASK 25-55-11-991-003-A)
 **ON A/C 301-399,

 (Ref. Fig. 403B/TASK 25-55-11-991-003-B)
 **ON A/C ALL

 Subtask 25-55-11-910-052
 A. Preparation for Installation
 (1)
 Clean the component interface and/or the adjacent area.

 (2)
 Do an inspection of the component interface and/or the adjacent area.

 (3)
 If necessary, remove the damaged tape (48) from the partition panels (41).

 EFF : ALL
25-55-11Page 434

 (4) Clean the component interface and/or the adjacent area with CLEANING AGENTS (Material No. 11-004).
 (5) Renew the removed tape (48) on the partition panels (41).
 Subtask 25-55-11-420-052

 B. Installation of the Sidewall Panels
 NOTE : The installation of each sidewall panel is the same.

____
 (1)
 Put the sidewall panels (41) in the correct installation position on the aircraft structure.

 (2)
 Secure the sidewall panels (41) with the studs (47).

 5. Close-up
________
 Subtask 25-55-11-410-052

 A. Put the aircraft back to the serviceable condition.
 (1) Make sure that the work area is clean and clear of tool(s) and other items.
R **ON A/C 001-049, 101-105,
 Subtask 25-55-11-865-058
 B. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s):
 For the AFT cargo compartment:
 102MY and 103MY.

 Subtask 25-55-11-942-059
 C. Close Access
 (1)
 Remove the actuator safety lock and close the AFT cargo-compartment door (Ref. TASK 52-30-00-860-002).

 (2)
 Remove the warning notice(s).

 (3)
 Remove the access platform(s).

 EFF : ALL
25-55-11Page 435

R  **ON A/C 051-099, 106-149, 151-199, 201-299, 301-399, 401-499,
 Subtask 25-55-11-942-059-A
 C. Close Access
 (1)
 Remove the actuator safety lock and close the AFT cargo-compartment door (Ref. TASK 52-30-00-860-002).

 (2)
 Remove the access platform(s).

R  EFF : 051-099, 106-149, 151-199, 201-299, 25-55-11Page 436 301-399, 401-499, Aug 01/05
 CES  LININGS AND PARTITIONS - AFT CARGO COMPARTMENT FR47 - REPAIRS

_____________________________________________________________
 TASK 25-55-11-300-001
 Fasteners Missing from the Lining Panels of the AFT Cargo Compartment
 1. Reason for the Job
__________________
 Self Explanatory
 2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific circuit breaker(s) safety clip(s)
 No specific warning notice
 No specific Highspeed Tape
 No specific access platform 2.0 m (6 ft. 7 in.)

 B. Consumable Materials
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 08-060  USA MIL-T-4053 TAPE, PRESSURE SENSITIVE,GLASSCLOTH (Ref. 20-31-00)
 C. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
25-50-00-200-002 General Visual Inspection of Cargo Compartment Decompression, Lining and Floor Panels 52-30-00-860-001 Open the FWD or AFT Cargo-Compartment Door with the Yellow Electric Pump 52-30-00-860-002 Close the FWD or AFT Cargo-Compartment Door with the
 Yellow Electric Pump R 25-55-11-991-005 Fig. 801 R 25-55-11-991-006 Fig. 802
 EFF : ALL
25-55-11Page 801

 3. Job Set-up
__________
 **ON A/C 001-049, 101-105,

 Subtask 25-55-11-010-055-A
 A. Get Access
 (1)
 Open the AFT cargo-compartment door and install the actuator safety lock (Ref. TASK 52-30-00-860-001).

 (2)
 Put the access platform in position at the opening of the AFT cargo-compartment door.

 (3)
 Put a warning notice in position on the control panel of the AFT cargo loading system (CLS) to tell persons not to use it.
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM EQUIPMENT/FURNISHINGS 設備4(29)