EFF : ALL
25-80-00Page 806
Aug 01/05
Repair of the Wrapper
Figure 802/TASK 25-80-00-991-004
EFF : ALL 25-80-00 Page 807
Aug 01/03
CES
R R (a) Bond the BONDING AND ADHESIVE COMPOUNDS (Material No. 08-073) or adhesive tape KB42 (compliant with FAR25.856(a)) over the damage.
NOTE : The adhesiv tape should overlap the edge of the damage 25____ mm (0.98 in.). The length of the tape should cover the other side of the blanket as shown in section B-B.
5. Close-up________
Subtask 25-80-00-410-056
A. Close Access (Ref. TASK 25-80-00-200-001)
EFF : ALL
25-80-00Page 808
TASK 25-80-00-350-002
Repair with Blanket Insert
1. Reason for the Job__________________
Self Explanatory
2. Job Set-up Information______________________
R A. Fixtures, Tools, Test and Support Equipment
R R R -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
R R R R R R No specific No specific No specific No specific No specific adhesive tape KB42 (compliant with FAR25.856(a)) glass wool ABS5630B glass wool DAN 88B20 wrapper foil DAN 379B (non-compliant with FAR25.856(a)) wrapper foil Terul 18 (compliant with FAR25.856(a))
R B. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
R Material No. 08-073 F ASNA3572 ADHESIVE TAPE (INSULATION BLANKET REPAIR) (Ref. 20-31-00)
R C. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
R R 25-80-00-200-001 AIPS 03-07-004 PMS 01-05-61 SIL 25135 25-80-00-991-005 General Repair Information Fig. 803
EFF : ALL
25-80-00Page 809
Aug 01/05
3. Job Set-up__________
Subtask 25-80-00-010-058
A. Get Access (Ref. TASK 25-80-00-200-001)
4. Procedure_________
Subtask 25-80-00-350-052
A. Repair with Blanket Insert (Ref. Fig. 803/TASK 25-80-00-991-005)
R (1) Refer to (Ref. SIL 25135)
R (2) Cut the damaged area (wrapper on both sides and the glass wool) out ot the insulation blanket in a rectangular shape.
R R R (3) Seal the edges of the cut-out correctly with BONDING AND ADHESIVE COMPOUNDS (Material No. 08-073) or adhesive tape KB42 (compliant with FAR25.856(a)).
R R (4) Accurately to the cut-out of the insulation blanket:
R R R (a) (Ref. PMS 01-05-61) Make a blanket insert of glass wool DAN 88B20, wrapper foil DAN 379B (non-compliant with FAR25.856(a)) and BONDING AND ADHESIVE COMPOUNDS (Material No. 08-073).
R R R (b) (Ref. AIPS 03-07-004): Make a blanket insert of glass wool ABS5630B, wrapper foil Terul 18 (compliant with FAR25.856(a)) and adhesive tape KB42 (compliant with FAR25.856(a)).
R R R (5) Install the blanket insert into the cut-out of the insulation blanket and attach it with BONDING AND ADHESIVE COMPOUNDS (Material No. 08-073) or adhesive tape KB42 (compliant with FAR25.856(a)).
5. Close-up________
Subtask 25-80-00-410-057
A. Close Access (Ref. TASK 25-80-00-200-001)
EFF : ALL
25-80-00Page 810
Aug 01/05
R Repair with Blanket Insert Figure 803/TASK 25-80-00-991-005
EFF : ALL 25-80-00 Page 811 Aug 01/05
CES
TASK 25-80-00-350-003 Replacement/Local Manufacturing
1.
Reason for the Job
__________________
Self Explanatory
2.
Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
25-80-00-200-001
R AIPS 03-07-004 PMS 01-05-61
R SIL 25135 25-80-00-991-006
3. Job Set-up
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM EQUIPMENT/FURNISHINGS 設備4(188)
