(3)
 Use a clamp to hold the carriage in position on the flap track. Use protective pads to prevent damage to the flap track surfaces.

 (4)
 Use a MISCELLANEOUS (Material No. 19-003), made moist with CLEANING AGENTS (Material No. 11-026) to clean the carriage forgings.

 Subtask 57-53-00-280-051
 B. Inspection
 (1) Do a special detailed inspection of the flap track 3 and 4 carriage forgings (Ref. NTM 57-53-50 PART 4).
 NOTE : If necessary, refer to the ASRM (Ref. ASRM 575300) for the
____ correct repair procedure. If the defect is not in this repair, you must request a procedure from Airbus Industrie.
 Subtask 57-53-00-420-051
 C. Connection of the Outboard Flap
 (1)
 Remove the clamp and the protective pads from the flap track.

 (2)
 Connect the outboard flap to the flap track 3 and 4 carriages (Ref. TASK 27-54-62-400-001).

 5. Close-up
________ Subtask 57-53-00-410-061
 A. Close Access
 (1) Lift the flap track 3 and 4 movable fairings (Ref. TASK 57-55-11-410-002).
 1EFF : ALL 1 57-53-00Page 690 1 1 May 01/05R 1 1 1CES 1

 Subtask 57-53-00-865-076

 B. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s): 6CV, 8CV, 21CE1.
 Subtask 57-53-00-860-095
 C. Aircraft Maintenance Configuration
 (1) Make sure that the work area is clean and clear of tool(s) and other items.
 (2) Retract the flaps (Ref. TASK 27-50-00-866-009). Subtask 57-53-00-942-062
 D. Removal of Equipment
 (1)
 Remove the access platform(s).

 (2)
 Remove the warning notice(s).

 (3)
 Remove the safety barriers.

 (4)
 Remove the ground support and maintenance equipment, the special and standard tools and all other items.

 1EFF : ALL 1 57-53-00Page 691 1 1 May 01/05R 1 1 1CES 1

 TASK 57-53-00-220-007

 Special Detailed Inspection of Outer Wing Outboard Flap Tracks 3 and 4 Flap Pivot Bolt Assembly
 WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING
_______ GEAR.
 WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU
_______ START A TASK ON OR NEAR:
 -
THE FLIGHT CONTROLS

 -
THE FLIGHT CONTROL SURFACES

 -
THE LANDING GEAR AND THE RELATED DOORS

 -COMPONENTS THAT MOVE.
 CAUTION : BE CAREFUL WHEN YOU DO MAINTENANCE TASKS ON THE WING TRAILING EDGE:
_______
 -
DO NOT CAUSE DAMAGE TO THE ELECTRICAL CABLE RACEWAYS.

 -
DO NOT CAUSE DAMAGE TO THE ELECTRICAL CABLE INSTALLATIONS.

 -MAKE SURE THAT THE ELECTRICAL CABLES ARE INSTALLED CORRECTLY. INCORRECT INSTALLATION CAN CAUSE DAMAGE.
 1. Reason for the Job
__________________
 Refer to the MPD TASK: 575352-01
 2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific circuit breaker(s) safety clip(s) No specific safety barriers No specific warning notices No specific access platform 2.5 m (8 ft. 2 in.) No specific Torque Wrench : range 2.00 to 20.00 m.daN
 (15.00 to 150.00 lbf.ft) 98D27504004000 1 GUIDE-CARRIAGE PIN (FLAP TRACKS 2, 3 AND 4) 98D27504033000 1 PIN-SLAVE
 1EFF : ALL 1 57-53-00Page 692 1 1 May 01/05R 1 1 1CES 1

 B. Consumable Materials

 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 04-004A
 INFORMATION TRANSFERRED TO 04-022 (Ref. 20-31-00) Material No. 11-026 GB DEF-STAN 68-148/1
 SOLVENT GENERAL PURPOSE (Ref. 20-31-00) Material No. 19-003 USA AMS 3819
 LINT-FREE COTTON CLOTH (Ref. 20-31-00)
 C. Expendable Parts
 -------------------------------------------------------------------------------
FIG.ITEM --------- |DESIGNATION ---------------------------------------- |IPC-CSN------------------------------
1  cotter pin  27-54-46 04B-035
 3  crushable spacer  27-54-46 06B-080
 D. Referenced Information
 ------------------REFERENCE  -------------------------------DESIGNATION ------------------------------

-------------------------------------------------------------------------------
27-50-00-866-008 Extension of the Flaps on the Ground 27-50-00-866-009 Retraction of the Flaps on the Ground 27-54-00-710-001 Operational Test of the Flap System 57-55-11-010-002 To Lower the Flap Track No. 3 & No. 4 Movable
　
中國航空網(wǎng) m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護(hù)手冊 AMM WINGS 機翼4(89)