(1) Do a check of the dimensions that follow:
-------------------------------------------------------------------------------| FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | | DETAIL |---------------------------------------|----------------------------| | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | | ITEM | MM (IN.) | MM (IN.) | MM (IN.) | ALLOW. | | NO. |-------------------|-------------------|---------|---------| CLEAR. | | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |MM (IN.)| |--------|---------|---------|---------|---------|---------|---------|--------| | B | 31.975 | 31.991 | | | 31.950 | | | | OD 5 |(1.2588) |(1.2594) | | |(1.2578) | | | | | | | 0.009 | 0.041 | | | 0.091 | | | | | (0.0003)| (0.0016)| | |(0.0035)| | B | 32.000 | 32.016 | | | | 32.041 | | | ID 6 |(1.2598) |(1.2604) | | | |(1.2614) | | -------------------------------------------------------------------------------
R 1EFF : 001-049, 051-099, 101-149, 151-199, 1 57-52-00Page A667 1201-299, 401-499, 1Aug 01/05 1 1 1CES 1
R **ON A/C 301-399,
R Subtask 57-52-00-220-065-A
R A. Dimensions of the Joint that Connects the Flap to the Flap Carriage
R (Track 1).
R (1) Do a check of the dimensions that follow:
R -------------------------------------------------------------------------------
R | FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS |
R | DETAIL |---------------------------------------|----------------------------|
R | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. |
R | ITEM | MM (IN.) | MM (IN.) | MM (IN.) | ALLOW. |
R | NO. |-------------------|-------------------|---------|---------| CLEAR. |
R | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |MM (IN.)|
R |--------|---------|---------|---------|---------|---------|---------|--------|
R | A | 67.940 | 67.970 | | | 67.880 | | |
R | OD 11 |(2.6748) |(2.6759) | | |(2.6724) | | |
R | | | | 0.030 | 0.090 | | | 0.210 |
R | | | | (0.0011)| (0.0035)| | |(0.0082)|
R | A | 68.000 | 68.030 | | | | 68.090 | |
R | ID 12 |(2.6771) |(2.6783) | | | |(2.6807) | |
R -------------------------------------------------------------------------------
R Subtask 57-52-00-220-066-A
R B. Dimensions of the Joint that Connects the Flap to the Flap Carriage
R (Track 2).
R (1) Do a check of the dimensions that follow:
R -------------------------------------------------------------------------------
R | FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS |
R | DETAIL |---------------------------------------|----------------------------|
R | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. |
R | ITEM | MM (IN.) | MM (IN.) | MM (IN.) | ALLOW. |
R | NO. |-------------------|-------------------|---------|---------| CLEAR. |
R | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |MM (IN.)|
R |--------|---------|---------|---------|---------|---------|---------|--------|
R | B | 41.975 | 41.991 | | | 41.945 | | |
R | OD 16 |(1.6525) |(1.6531) | | |(1.6513) | | |
R | | | | 0.009 | 0.050 | | | 0.110 |
R | | | | (0.0003)| (0.0019)| | |(0.0043)|
R | B | 42.000 | 42.025 | | | | 42.055 | |
R | ID 14 |(1.6535) |(1.6545) | | | |(1.6557) | |
R -------------------------------------------------------------------------------
R Subtask 57-52-00-220-067-A
R C. Dimensions of the Joint that Connects the Flap to the Flap Carriage
R (Track 2).
R (1) Do a check of the dimensions that follow:
R -------------------------------------------------------------------------------
R | FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS |
R | DETAIL |---------------------------------------|----------------------------|
R | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. |
R | ITEM | MM (IN.) | MM (IN.) | MM (IN.) | ALLOW. |
R | NO. |-------------------|-------------------|---------|---------| CLEAR. |
R | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |MM (IN.)|
R |--------|---------|---------|---------|---------|---------|---------|--------|
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM WINGS 機翼4(55)
