A. Close Access WARNING : MAKE SURE THAT THE TRAVEL RANGES OF THE FLIGHT CONTROLS ARE
_______ CLEAR. MOVEMENT OF FLIGHT CONTROLS CAN CAUSE INJURY TO PERSONS AND/OR DAMAGE.
R (1) Install the applicable flap track 1 actuator (Ref. TASK 27-54-49-400-001).
 (2)
 Install the applicable flap track 1 actuator drive lever (Ref. TASK 27-54-55-400-001).

 (3)
 Remove the LOCKING TOOL - FLAP/SLAT CONTROL LEVER from the flap/slat control lever.

 (4)
 Fully retract the flaps (Ref. TASK 27-50-00-866-009).

 (5)
 Make sure that the work area is clean and clear of tool(s) and other items.

 (6)
 Install the applicable access panels (Ref. TASK 53-35-11-400-001):

 -
for the LH wing, install 193AB, 193BB

 -
for the RH wing, install 194AB, 194BB.

 (7) Close the applicable MLG door (Ref. TASK 32-12-00-410-001).
 Subtask 57-52-00-942-081

 B. Removal of Equipment
 (1)
 Remove the access platform(s).

 (2)
 Remove the warning notice(s).

 (3)
 Remove the safety barriers.

 (4)
 Remove the ground support and maintenance equipment, the special and standard tools and all other items.

R 1EFF : 001-049, 051-061, 101-103, 201-203, 1 57-52-00Page A678 1 1 May 01/05 1 1 1CES 1

R  **ON A/C 301-399, 
R  TASK 57-52-00-210-009 
R  General Visual Inspection of Inboard Double-Slotted Flap, External Surface of 
R  Upper and Lower Skin, LH/RH 
R  WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU_______ 
R  START A TASK ON OR NEAR: 
R  - THE FLIGHT CONTROLS 
R  - THE FLIGHT CONTROL SURFACES 
R  - THE LANDING GEAR AND THE RELATED DOORS 
R  - COMPONENTS THAT MOVE. 
R  WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING_______ 
R  GEAR. 
R  CAUTION : BE CAREFUL WHEN YOU DO MAINTENANCE TASKS ON THE WING TRAILING EDGE:_______ 
R  - DO NOT CAUSE DAMAGE TO THE ELECTRICAL CABLE RACEWAYS. 
R  - DO NOT CAUSE DAMAGE TO THE ELECTRICAL CABLE INSTALLATIONS. 
R  - MAKE SURE THAT THE ELECTRICAL CABLES ARE INSTALLED CORRECTLY. 
R  INCORRECT INSTALLATION CAN CAUSE DAMAGE. 
R  1. Reason for the Job__________________ 
R  Refer to the MPD TASK: 575221-01 
R  2. Job Set-up Information______________________ 
R  A. Fixtures, Tools, Test and Support Equipment 
R  -------------------------------------------------------------------------------
R  REFERENCE  QTY DESIGNATION 
R  -------------------------------------------------------------------------------
R  No specific  adjustable access platform 
R  No specific  circuit breaker(s) safety clip(s) 
R  No specific  safety barriers 
R  No specific  warning notice 
R  98D27803000000  1 LOCKING TOOL - FLAP/SLAT CONTROL LEVER

R B. Consumable Materials

R  -------------------------------------------------------------------------------
R  REFERENCE  DESIGNATION 
R  -------------------------------------------------------------------------------
R  Material No. 11-026  GB  DEF-STAN  68-148/1 
R  SOLVENT GENERAL PURPOSE (Ref. 20-31-00) 
R  Material No. 19-003  USA AMS 3819 
R  LINT-FREE COTTON CLOTH (Ref. 20-31-00) 
R  C. Referenced Information 
R  -------------------------------------------------------------------------------
R  REFERENCE  DESIGNATION 
R  -------------------------------------------------------------------------------

R  27-50-00-866-008  Extension of the Flaps on the Ground 
R  27-50-00-866-009  Retraction of the Flaps on the Ground 
R  ASRM 575200  (for corrective action) 
R  57-52-00-991-034  Fig. 630 
R  3. Job Set-up__________ 
R  Subtask 57-52-00-941-084 
R  A. Safety Precautions 

R  (1) Put the safety barriers in position. 
R  Subtask 57-52-00-860-107 
R  B. Aircraft Maintenance Configuration 
R  WARNING : MAKE SURE THAT THE TRAVEL RANGES OF THE FLIGHT CONTROLS ARE_______ 
R  CLEAR. MOVEMENT OF FLIGHT CONTROLS CAN CAUSE INJURY TO PERSONS 
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM WINGS 機翼4(58)