D. Removal of Equipment
 (1)
 Remove the access platform(s).

 (2)
 Remove the warning notice(s).

 (3)
 Remove the safety barriers.

 (4)
 Remove the ground support and maintenance equipment, the special and standard tools and all other items.

R 1EFF : 001-049, 051-099, 101-149, 151-199, 1 57-52-00Page 688 1201-299, 401-499, 1Aug 01/05 1 1 1CES 1

R  **ON A/C 301-399, 
R  TASK 57-52-00-210-001 
R  Detailed Visual Inspection of Inboard Double Slotted Flap, Trunnion Attachment 
R  Bracket, Including Inboard Trunnion, LH/RH 
R  WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU_______ 
R  START A TASK ON OR NEAR: 
R  - THE FLIGHT CONTROLS 
R  - THE FLIGHT CONTROL SURFACES 
R  - THE LANDING GEAR AND THE RELATED DOORS 
R  - COMPONENTS THAT MOVE. 
R  WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING_______ 
R  GEAR. 
R  CAUTION : BE CAREFUL WHEN YOU DO MAINTENANCE TASKS ON THE WING TRAILING EDGE:_______ 
R  - DO NOT CAUSE DAMAGE TO THE ELECTRICAL CABLE RACEWAYS. 
R  - DO NOT CAUSE DAMAGE TO THE ELECTRICAL CABLE INSTALLATIONS. 
R  - MAKE SURE THAT THE ELECTRICAL CABLES ARE INSTALLED CORRECTLY. 
R  INCORRECT INSTALLATION CAN CAUSE DAMAGE. 
R  1. Reason for the Job__________________ 
R  Refer to the MPD TASK: 575223-01 
R  2. Job Set-up Information______________________ 
R  A. Fixtures, Tools, Test and Support Equipment 
R  -------------------------------------------------------------------------------
R  REFERENCE  QTY DESIGNATION 
R  -------------------------------------------------------------------------------
R  No specific  circuit breaker(s) safety clip(s) 
R  No specific  safety barriers 
R  No specific  spark-proof lamp 
R  No specific  warning notice 
R  No specific  access platform 2.5 m (8 ft. 2 in.) 
R  98D27803000000  1 LOCKING TOOL - FLAP/SLAT CONTROL LEVER 

R 1EFF : 301-399, 1 57-52-00Page 689 1 1 May 01/04 1 1 1CES 1

R B. Consumable Materials

R  -------------------------------------------------------------------------------
R  REFERENCE  DESIGNATION 
R  -------------------------------------------------------------------------------
R  Material No. 11-026  GB  DEF-STAN  68-148/1 
R  SOLVENT GENERAL PURPOSE (Ref. 20-31-00) 
R  Material No. 19-003  USA AMS 3819 
R  LINT-FREE COTTON CLOTH (Ref. 20-31-00) 
R  C. Referenced Information 
R  -------------------------------------------------------------------------------
R  REFERENCE  DESIGNATION 
R  -------------------------------------------------------------------------------

R  27-50-00-866-008  Extension of the Flaps on the Ground 
R  27-50-00-866-009  Retraction of the Flaps on the Ground 
R  27-54-61-000-005  Removal of the Inboard Flap Seals 
R  27-54-61-400-007  Installation of the Inboard Flap Seals 
R  ASRM 575200  (for corrective action) 
R  57-52-00-991-015  Fig. 615 
R  3. Job Set-up__________ 
R  Subtask 57-52-00-941-068 
R  A. Safety Precautions 

R  (1) Put a warning notice on the flap/slat control lever (panel 114VU) to 
R  tell persons not to operate the flaps. 
R  (2) Put the safety barriers in position. 
R  Subtask 57-52-00-860-050 
R  B. Aircraft Maintenance Configuration 
R  WARNING : MAKE SURE THAT THE TRAVEL RANGES OF THE FLIGHT CONTROLS ARE_______ 
R  CLEAR. MOVEMENT OF FLIGHT CONTROLS CAN CAUSE INJURY TO PERSONS 
R  AND/OR DAMAGE. 
R  (1) Fully extend the flaps (Ref. TASK 27-50-00-866-008). 

R 1EFF : 301-399, 1 57-52-00Page 690 1 1 May 01/04 1 1 1CES 1

R  (2) Make sure that the LOCKING TOOL - FLAP/SLAT CONTROL LEVER 
R  (98D27803000000) is installed on the flap/slat control lever on the 
R  panel 114VU. 
R  Subtask 57-52-00-865-084 
R  C. Open, safety and tag this(these) circuit breaker(s): 
R  -------------------------------------------------------------------------------
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM WINGS 機翼4(34)