曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

R  inner bolt (12). 
R  (b) Install the inner bolt (12) in the outer bolt (10). 
R  (c) Attach the inner bolt (12) to the outer bolt (10) with a new 
R  rivet (11) (NSA5414-40-000). 
R  (3) Apply a thin layer of COMMON GREASE (Material No. 04-022) to the 
R  splined bush (1) and to the pivot bolt assembly (9). 
R  CAUTION : DO NOT REMOVE THE RETAINING WIRE RING FROM THE CARRIAGE_______ 
R  BOLT ASSEMBLY. 
R  IF YOU DO, YOU MUST INSTALL A NEW CARRIAGE BOLT ASSEMBLY TO 
R  KEEP THE FAIL SAFE FUNCTION. 
R  (4) Install the EXTRACTOR - PIN TRACKS 2 AND 3 (98D27504083000) on the 
R  pivot bolt assembly (9). 
R  (5) Install the pivot bolt assembly (9) in the flap carriage with the 
R  EXTRACTOR - PIN TRACKS 2 AND 3. At the same time remove the SLAVE 
R  PIN-TRACK 2 & 3 from the flap carriage. 
R 
R  NOTE : Make sure that you install the extractor tool fully on to the____ 
R  threads of the pivot bolt assembly (9). This will let the 
R  carriage bushes compress the retaining ring (8) as the pivot 
R  bolt (9) is installed. 
R  (6) Remove the EXTRACTOR - PIN TRACKS 2 AND 3 from the pivot bolt 
R  assembly. 
R  CAUTION : MAKE SURE THAT THE SPLINED BUSH IS FULLY ENGAGED WITH THE_______ 
R  SPHERICAL BEARING. THIS PREVENTS DAMAGE TO THE PARTS. 

R 1EFF : 301-399, 1 57-52-00Page 667 1 1 May 01/04 1 1 1CES 1

R R  (7) Install the splined bush (1) correctly over the pivot bolt assembly (9). 
R  (8) Install locking plate (2) on the splined bush (1). 
R  (9) Install a new crushable spacer (3) and the nut (4). 
R R  (10) TORQUE the nut to between 15.0 and 20.0 m.daN (110.61 and 147.49 lbf.ft). 
R  (11) Safety the nut (4) with a new cotter pin (5). 
R  (12) Install the washer (7) and the nut (6). 
R  **ON A/C ALL
 5. Close-up________
 Subtask 57-52-00-410-081
 A. Close Access
 (1) Lift the flap track 2 fairing (Ref. TASK 57-55-11-410-001).
 Subtask 57-52-00-865-075
 B. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s): 6CV, 8CV.
 Subtask 57-52-00-860-102
 C. Aircraft Maintenance Configuration
 (1) Make sure that the work area is clean and clear of tool(s) and other items.
 (2) Remove the LOCKING TOOL - FLAP/SLAT CONTROL LEVER from the flap/slat control lever.
 (3) Retract the flaps (Ref. TASK 27-50-00-866-009).

 

 Subtask 57-52-00-942-062
 D. Removal of Equipment
 (1)
 Remove the access platform(s).

 (2)
 Remove the warning notice(s).

 (3)
 Remove the safety barriers.

 (4)
 Remove the ground support and maintenance equipment, the special and standard tools and all other items.

 1EFF : ALL 1 57-52-00Page 669 1 1 May 01/04R 1 1 1CES 1

R **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 401-499,
 TASK 57-52-00-200-008
 Detailed Visual Inspection of Inboard Flap, Drive Strut for Flap and Drive Lever for Flap Track Fairing including Attachment Brackets to the Flap ...
 WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING
_______
 GEAR.

 WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU
_______
 START A TASK ON OR NEAR:

 -
THE FLIGHT CONTROLS

 -
THE FLIGHT CONTROL SURFACES

 -
THE LANDING GEAR AND THE RELATED DOORS

 -COMPONENTS THAT MOVE.
 CAUTION : BE CAREFUL WHEN YOU DO MAINTENANCE TASKS ON THE WING TRAILING EDGE:
_______
 -
DO NOT CAUSE DAMAGE TO THE ELECTRICAL CABLE RACEWAYS.

 -
DO NOT CAUSE DAMAGE TO THE ELECTRICAL CABLE INSTALLATIONS.

 -MAKE SURE THAT THE ELECTRICAL CABLES ARE INSTALLED CORRECTLY. INCORRECT INSTALLATION CAN CAUSE DAMAGE.
 1. Reason for the Job
__________________
 Refer to the MPD TASK: 575205-01 Detailed Visual Inspection of Inboard Flap, Drive Strut for Flap and Drive Lever for Flap Track Fairing including Attachment Brackets to the Flap and surrounding Skin at Track No. 2, LH/RH.
 2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM WINGS 機翼4(29)