R (7) Install the access panel 575GB(675GB) (16) as follows:
R (a) Put the access panel (16) in position and attach it with two of
R the outer camloc fasteners (15).
R (b) Set the access panel (16) so that:
R - dimension X is between 0.1 mm (0.0039 in.) and 4.3 mm (0.1692
R in.) along the full length of the panel. Try and set the
R clearance as near as possible to 2.0 mm (0.0787 in.).
R - dimension Z is between 3.0 mm (0.1181 in.) and 6.0 mm (0.2362
R in.) along the full width of the panel outboard end. Try and
R set the clearance as near as possible to 4.0 mm (0.1574 in.).
R (c) Attach the access panel (16) to the wing with the remaining
R camloc fasteners (15).
R (d) Fill the clearance between the access panel (16) and the trailing
R edge of the wing skin with SEALANTS (Material No. 09-016).
R (8) Install the access panel 575HB(675HB) (14) as follows:
R (a) Put the access panel (14) in position and attach it with two of
R the outer camloc fasteners (13).
R (b) Set the access panel (14) so that:
R - dimension X is between 0.1 mm (0.0039 in.) and 4.3 mm (0.1692
R in.) along the full length of the panel. Try and set the
R clearance as near as possible to 2.0 mm (0.0787 in.).
R - dimension Z is between 3.0 mm (0.1181 in.) and 6.0 mm (0.2362
R in.) along the full width of the panel inboard end. Try and set
R the clearance as near as possible to 4.0 mm (0.1574 in.).
R (c) Attach the access panel (14) to the wing with the remaining
R camloc fasteners (13).
R (d) Fill the clearance between the access panel (14) and the trailing
R edge of the wing skin with SEALANTS (Material No. 09-016).
R 5. Close-up________
R Subtask 57-51-37-942-054
R A. Removal of Equipment
R (1) Make sure that the work area is clean and clear of tool(s) and other
R items.
R (2) Remove the access platform(s).
R (3) Remove the safety barriers.
R (4) Remove the LOCKING TOOL - FLAP/SLAT CONTROL LEVER (Ref. TASK 27-00-
R 00-080-002) from the flap/slat control lever.
R (5) Remove the warning notice(s).
TASK 57-51-37-960-001
R Replacement of the Lower Trailing Edge Access Panel Seals
WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING_______ GEAR.
WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU_______ START A TASK ON OR NEAR: - THE FLIGHT CONTROLS - THE FLIGHT CONTROL SURFACES - THE LANDING GEAR AND THE RELATED DOORS - COMPONENTS THAT MOVE.
1. Reason for the Job__________________
Self Explanatory
2. Job Set-up Information______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
R R R No specific No specific No specific 98D27803500001 adjustable access platformwarning notice Torque Wrench : range 0.00 to 1.20 m.daN (0.00 to 9.00 lbf.ft) 1 TOOL-ZERO LOCKING, FLAP SLAT CTL LEVER
B. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 09-001 Material No. 11-026 Material No. 19-003 USA MIL-S-8802 TYPE I CLASS A FUEL TANK SEALANTPOLYSULFIDE (Ref. 20-31-00)GB DEF-STAN 68-148/1 SOLVENT GENERAL PURPOSE (Ref. 20-31-00)USA AMS 3819 LINT-FREE COTTON CLOTH (Ref. 20-31-00)
C. Expendable Parts
-------------------------------------------------------------------------------FIG.ITEM |DESIGNATION |IPC-CSN -------------------------------------------------------------------------------
FOR FIN 573AB 3 seal 3 seal 3 seal 3 seal FOR FIN 673AB 3 seal 3 seal 3 seal 3 seal FOR FIN 573BB 3 seal 3 seal 3 seal 3 seal FOR FIN 673BB 3 seal 3 seal 3 seal 3 seal FOR FIN 573CB 3 seal 3 seal 3 seal FOR FIN 673CB 3 seal 3 seal 3 seal FOR FIN 573FB 3 seal FOR FIN 673FB 3 seal FOR FIN 575AB 3 seal 3 seal FOR FIN 675AB 3 seal 3 seal FOR FIN 575BB 3 seal 3 seal 57-51-37 03 -050A57-51-37 03 -050B57-51-37 03A-05057-51-37 03M-050
57-51-37 03 -060A57-51-37 03 -060B57-51-37 03A-06057-51-37 03M-060
中國航空網(wǎng) m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM WINGS 機翼4(2)
