(5)
 Connect the bonding strap (12) with the screw (10) and the washer

 (11) to the support arm (1) (Ref. TASK 20-28-00-912-004).

 (6)
 Install the emergency exit door (Ref. TASK 52-22-11-400-001).

 (7)
 Install the door damper and emergency operation cylinder (Ref. TASK 52-22-14-400-001).

 5. Close-up
________ Subtask 52-22-12-865-052
 A. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s):
 -------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------121VU EIS/SLIDES/ARM AND WARN/FLT 15WN P11 121VU EIS/SLIDES/ARM AND WARN/GND 13WN P10 121VU EIS/SDAC1 AND 2/DOOR/DET/PAX 48WV P05
 Subtask 52-22-12-410-050
 B. Close Access
 (1)
 Make sure that the work area is clean and clear of tool(s) and other items.

 (2)
 Make sure that the door damper and emergency operation cylinder is correctly pressurized (Ref. TASK 52-22-00-614-002).

 (3)
 Do the special precaution on the door damper and emergency operation cylinder (Ref. TASK 52-22-00-860-004).

 1EFF : 301-399, 1 52-22-12Page 408 1 1 May 01/04 1 1 1CES 1

 (4)
 Close the emergency exit door (Ref. TASK 52-22-00-410-001).

 (5)
 Remove the access platform(s).

 1EFF : 301-399, 1 52-22-12Page 409 1 1 May 01/04 1 1 1CES 1

 TASK 52-22-12-000-002 Removal of the Door Stay Mechanism
 1.
 Reason for the Job

__________________
 Self Explanatory

 2.
 Job Set-up Information

______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific circuit breaker(s) safety clip(s) No specific access platform 3.20 m (10 ft. 6 in.)
 B. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
52-22-00-010-001  Opening of the Emergency Exit Doors from the Passenger Compartment 52-22-00-860-003 Special Precaution before Maintenance on the Door Damper and Emergency Operation Cylinder 52-22-12-991-002 Fig. 402
 3. Job Set-up
__________ Subtask 52-22-12-865-053
 A. Open, safety and tag this(these) circuit breaker(s):
 -------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------
121VU EIS/SLIDES/ARM AND WARN/FLT 15WN P11 121VU EIS/SLIDES/ARM AND WARN/GND 13WN P10 121VU EIS/SDAC1 AND 2/DOOR/DET/PAX 48WV P05
 1EFF : 301-399, 1 52-22-12Page 410 1 1 May 01/04 1 1 1CES 1 Subtask 52-22-12-010-051

 B. Get Access
 (1)
 Put the access platform in position below the applicable door.

 (2)
 Partly open the emergency exit door as required (Ref. TASK 52-22-00-010-001).

 (3)
 Make sure that the special precaution on the door damper and emergency operation cylinder is completed (Ref. TASK 52-22-00-860-003).

 4. Procedure
_________ Subtask 52-22-12-020-051
 A. Removal of the Door Stay Mechanism
 (Ref. Fig. 402/TASK 52-22-12-991-002)

 (1)
 Remove the release rod (21) from the support arm as follows:

 (a)
 Remove the screws (22) and the washers (23) and (25).

 (b)
 Remove the handle (24).

 (c)
 Remove the release rod (21).

 (2)
 Remove the release assy (28) from the support arm as follows:

 (a)
 Remove the nuts (26) and the washers (27).

 (b)
 Remove the screws (29).

 (c)
 Remove the release assy (28).

 (3)
 Remove the lock assy (31) from the support arm as follows:

 (a)
 Remove the nuts (34) and the washers (33).

 (b)
 Remove the screws (30).

 (c)
 Remove the lock assy (31) and the washers (32).

 1EFF : 301-399, 1 52-22-12Page 411 1 1 May 01/04 1 1 1CES 1

 Door Stay Mechanism
 Figure 402/TASK 52-22-12-991-002
 1EFF :  301-399,  1  52-22-12 Page 412 
1  1  May 01/04
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM DOORS 艙門3(95)