R Measurement of Actuation Travel
R Figure 502/TASK 52-22-00-991-025- 22 (SHEET 2)

 1EFF : 301-399, 1 52-22-00Page 513 1 1 May 01/04 1 1 1CES 1R (2) Do this test to make sure that the locking mechanism of the R applicable door operates satisfactorily.

R -------------------------------------------------------------------------------R ACTION RESULT R -------------------------------------------------------------------------------
R 1. Open the handle cover and pull up R the inboard handle to the OPEN R position. R R R R R
R 2. Push the inboard handle down to R the locked position and close the R handle cover. R
R R R
R 3. Push the handle flap in and pull R the outboard lever away from the R door. R
R 4. Push the outboard lever down so R that it engages in the recess of the R door.
The white indication light SLIDE comes
on when the inboard handle is moved up.
The red UNLOCK indication comes into
view of the locking indication window.
The door lifts and the door release
lever operates the override-clutch
release lever so that the bellcrank
lever moves rearward.

The door moves down in its locked
position.
The green LOCKED indication comes into
view of the locking indication window.

The white indication light SLIDE goes
off when the inboard handle is fully
moved down.

The escape slide-relase mechanism moves
automatically to the DISARMED mode.
The door moves up and comes free from
its opening.

The door lowers into its opening and
moves down.

1EFF : 301-399, 1 52-22-00Page 514 1 1 May 01/04 1 1 1CES 1

R  **ON A/C 102-149, 201-207, 211-299, 301-399, 401-499, Post SB 25-1270 For A/C 102-105,201-207, Subtask 52-22-00-710-055
 B. Operational Test of the Slide Release-Mechanism Arming/Disarming
 (1)
 Make sure that the applicable door is closed and locked and the slide control handle is in the ARMED position (Ref. TASK 52-22-00-410-001).

 (2)
 Do this test to make sure that the escape-slide release-mechanism operates satisfactorily.

 -------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
1. Open the protection cover and pull up the slide control handle to the disarmed position.  The green DISARMED indication comesinto view on the indication window ofthe door lining. The lateral release lever moves down
 until it comes free from the slide
 release lever of the frame fitting. The operation lever moves down until it comes free from the release lever of
 the door damper.
 NOTE : The lateral release lever and____
 the operation lever are part of the release shaft assembly.
 2. Push down the slide control  The red ARMED indication comes into
 handle to the armed position.  view on the indication window of the door lining. The lateral release lever moves up and engages with the slide release lever of the frame fitting. The operation lever moves up and engages with the release lever of the door damper. 

R 1EFF : 102-149, 201-207, 211-299, 301-399, 1 52-22-00Page 515 1401-499, 1Aug 01/05 1 1 1CES 1R **ON A/C 301-399,

R Subtask 52-22-00-720-050
R C. Functional Test of the Escape-Slide Release Mechanism
R (Ref. Fig. 502/TASK 52-22-00-991-025, 503/TASK 52-22-00-991-028)

R (1) Make sure that the applicable door is locked and in the ARMED mode.

R (2) To reduce the play in the release lever assembly, do the subsequent:

R (a) Assemble a nylon strip on the release lever to attach the
R dynamometer.

R (b) Put a dynamometer of 20.0 daN (44.9617 lbf) in position to the
R nylon strip to connect it with the release lever.

R (c) Pull on the dynamometer with a force of max. 10.0 daN (22.4808
R lbf) during the complete test.

R (3) Do this test to make sure that the
R - release travel of the slide control cable is correct
R - escape-slide release mechanism operates satisfactorily

R -------------------------------------------------------------------------------R ACTION RESULT
R -------------------------------------------------------------------------------
R 1. Open the handle cover and pull up R the inboard handle to the open R position. R
R 2. Measure the distance between the R start position and the end position R of the bellcrank lever.
The door lifts and the door release lever operates the override-clutch release lever so that the bellcrank lever moves rearward.
The distance must be between 35.0 mm (1.3779 in.) and 21.0 mm (0.8267 in.).
1EFF : 301-399, 1 52-22-00Page 516 1 1 May 01/04 1 1 1CES 1
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM DOORS 艙門3(65)