__________________
Refer to the MPD TASK: 522203-01
2.
Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific 1 ACCESS PLATFORM 5M (16 FT)- ADJUSTABLE
B. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
51-73-11-300-002 Repair of Minor Damage on Titanium, Forged Aluminum, or Steel Components 52-22-00-010-001 Opening of the Emergency Exit Doors from the Passenger Compartment 52-22-00-410-001 Closing of the Emergency Exit Doors from the
Passenger Compartment ASRM 52200010100 52-22-11-991-008 Fig. 603
3. Job Set-up
__________ Subtask 52-22-11-010-057
A. Get Access
(1)
Put the ACCESS PLATFORM 5M (16 FT)- ADJUSTABLE in position at the Fwd emergency exit door 833 (843).
(2)
Open the Fwd emergency exit door 833 (843) (Ref. TASK 52-22-00-010-001).
1EFF : 301-399, 1 52-22-11Page 617 1 1 May 01/04 1 1 1CES 1
4. Procedure
_________
(Ref. Fig. 603/TASK 52-22-11-991-008) Subtask 52-22-11-210-054
A. General Visual Inspection Procedure
(1)
Clean the component interface and/or the adjacent area.
(2)
Examine the locking hooks for cracks, distortion, fretting, gouges, nicks, scratches, other damage and correct installation.
(a)
If you find cracks, distortion, fretting, gouges, nicks, scratches or other damage:
-Repair the locking hooks, refer to (Ref. ASRM 52200010100) or (Ref. TASK 51-73-11-300-002).
(b)
Make sure the locking hooks are correctly installed.
(3)
Examine the bushes and bolts of the locking hook mechanisms for cracks, gouges, nicks, scratches, wear or damage and correct installation:
(a)
If you find cracks, gouges, nicks, scratches, wear or other damage:
-Repair the locking hook mechanisms, refer to (Ref. ASRM 52200010100) or (Ref. TASK 51-73-11-300-002).
(b)
Make sure the bushes and bolts of the locking hook mechanisms are correctly installed.
(4)
Examine the door stop assemblies for cracks, distortion, fretting, gouges, nicks, scratches or other damage and correct installation.
(a)
If you find cracks, distortion, fretting, gouges, nicks, scratches or other damage:
-Repair the door stop assemblies, refer to (Ref. ASRM 52200010100).
(b)
Make sure the door stop assemblies are correctly installed.
1EFF : 301-399, 1 52-22-11Page 618 1 1 May 01/04 1 1 1CES 1
Door Stop Assemblies and Locking Hooks
Figure 603/TASK 52-22-11-991-008
1EFF : 301-399, 1 52-22-11 Page 619
1 1 May 01/04
1 1
1CES 1
5. Close-up
________ Subtask 52-22-11-410-057
A. Close the LH/RH Forward Emergency-Exit Door
(1)
Make sure that the work area is clean and clear of tool(s) and other items.
(2)
Close the Fwd emergency exit door 833 (843) (Ref. TASK 52-22-00-410-001).
(3)
Remove the access platform(s).
1EFF : 301-399, 1 52-22-11Page 620 1 1 May 01/04 1 1 1CES 1
TASK 52-22-11-200-007 General Visual Inspection of Aft Emergency Exits, External Surface, LH/RH
1.
Reason for the Job
__________________
Refer to the MPD TASK: 522204-01
2.
Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific 1 ACCESS PLATFORM 5M (16 FT)- ADJUSTABLE
B. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
51-75-12-300-001 Repair of Major Paint Damage on Light Alloy and
Composite Material 51-75-12-300-003 Repair of Minor Paint Damage (Topcoat Only) ASRM 52200010100 52-22-11-991-009 Fig. 604
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM DOORS 艙門3(91)
