曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

R  (e) Put the adjustment washers (52), the washer (51) and the bracket 
R  (68) in position and install the bushes (58) in the spacer tube 
R  (54). 
R  (f) Install the lower hinge bolt (55), the washers (56) and the nut 
R  (59) on the lifting lever (58). 
R  (g) Measure the clearance "H" between the adjustment washers (52) and 
R  the spacer tube (44). 
R  NOTE : A clearance of 0.05 mm (0.0019 in.) is permitted.____ 
R  (7) Change the quantity of the adjustment washers (66) as follows: 
R  (a) Remove the nut (59), the washers (56) and the lower hinge pin 
R  (55) from the lifting lever (58). 
R  (b) Remove the journal pin (64) from the lower fork-end of the 
R  support arm (53). 
R  (c) Change the quantity of the adjustment washers (66) as required 
R  until the lower gaps "F" are correct. 
R  (d) Install the journal pin (64) in the lower fork-end (53).

 

R  (e) Measure the clearance "J" between the adjustment washers (66) and 
R  the spacer tube (54). 
R  NOTE : A clearance of 0.05 mm (0.0019 in.) is permitted.____ 
R  (f) Install the lower hinge pin (55), the washers (56) and the nut 
R  (59) to the lifting lever (57). 
R  (g) Tighten the nut (59) and safety it with the new cotter pin (60). 
R  5. Close-up________ 
R  Subtask 52-22-00-410-057 
R  A. Close Access 
R  (1) Remove the BALLAST WEIGHT - EMERGENCY EXIT from the door. 
R  (2) Make sure that the work area is clean and clear of tool(s) and other 
R  items. 
R  (3) Install the door linings (Ref. TASK 25-23-47-400-012) and (Ref. TASK 
R  25-23-47-400-013) and the door frame linings (Ref. TASK 25-23-47-400-
R  004) and (Ref. TASK 25-23-47-400-009). 
R  (4) Do the special precaution on the door damper and emergency operation 
R  cylinder (Ref. TASK 52-22-00-860-004). 
R  (5) Close the door correctly (Ref. TASK 52-22-00-410-001). 
R  Subtask 52-22-00-865-055 
R  B. Make sure that this(these) circuit breaker(s) is(are) closed: 
R  13WN, 15WN, 48WV

 

 Adjustment of the Locking Mechanism
 1. Reason for the Job
__________________
 Self Explanatory
 2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------
REFERENCE  QTY DESIGNATION
 -------------------------------------------------------------------------------
No specific  adjustment gage
R No specific  Torque Wrench : range 0.00 to 1.20 m.daN
R (0.00 to 9.00 lbf.ft) 98D52207557000 1 BALLAST WEIGHT - EMERGENCY EXIT 98D52208282000 1 PIN - RIGGING, DOOR MECHANISM
 B. Consumable Materials
 -------------------------------------------------------------------------------
REFERENCE  DESIGNATION
 -------------------------------------------------------------------------------
No specific  lockwire, corrosion resistance steel, dia 0.8 mm
 (0.30 in.)
 C. Referenced Information
 -------------------------------------------------------------------------------
REFERENCE  DESIGNATION
 -------------------------------------------------------------------------------
25-23-47-000-012  Removal of the Door Linings of the LH FWD Emergency Exit Door, zone 231
 25-23-47-000-013  Removal of the Door Linings of the RH FWD Emergency Exit Door at zone 251 or RH AFT at zone 252 or LH AFT at zone 232.
 25-23-47-400-012  Installation of the Door Linings of the LH FWD
 Emergency Exit Door, zone 231

 25-23-47-400-013  Installation of the Door Linings of the RH FWD Emergency Exit Door at zone 251, or RH AFT at zone 252, or LH AFT at zone 232.
 1EFF : 301-399, 1 52-22-00Page 536 1 1 May 01/05 1 1 1CES 1 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------

R 52-22-00-010-001 R R 52-22-00-410-001 R R 52-22-00-710-001 R R R R 52-22-00-820-002 R 52-22-00-820-005 R 52-22-00-860-003 R R 52-22-00-860-004 R R 52-71-00-820-007 R R 52-22-00-991-013 R 52-22-00-991-014 R 52-22-00-991-015 R 52-22-00-991-018 R 52-22-00-991-016
R 3. Job Set-up
__________
R Subtask 52-22-00-010-064
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM DOORS 艙門3(70)