1EFF : ALL 1 52-11-31Page 431 1 1 May 01/98R 1 1 1CES 1
5. Close-up
________
**ON A/C 001-002,
Subtask 52-11-31-080-050
A. Installation of Components
(1)
Remove the BALLAST WEIGHT - PASSENGER CREW DOOR (98D52103501000) (Ref. TASK 52-10-00-080-001).
(2)
Install the door insulation.
(3)
Install the door frame lining panels (Ref. TASK 25-23-45-400-007)> (Ref. TASK 25-23-45-400-006).
(4)
Install the door lining panels (Ref. TASK 25-23-46-400-001).
(5) Install the escape slide (Ref. TASK 25-62-44-400-001). R **ON A/C 003-049, 051-099, 101-149, 151-199, 201-299, 301-399, 401-499,
Subtask 52-11-31-080-050-A
A. Installation of Components
(1)
Remove the BALLAST WEIGHT - PASSENGER CREW DOOR (98D52103501000) (Ref. TASK 52-10-00-080-001).
(2)
Install the door insulation.
(3)
Install the door frame lining panels (Ref. TASK 25-23-45-400-007)> (Ref. TASK 25-23-45-400-006).
(4)
Install the door lining panels (Ref. TASK 25-23-46-400-001).
(5)
Install the escape slide/raft (Ref. TASK 25-62-44-400-001).
1EFF : ALL 1 52-11-31Page 432 1 1 Aug 01/05 1 1 1CES 1 **ON A/C ALL
Subtask 52-11-31-865-055
B. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s): 13WN, 15WN, 48WV
Subtask 52-11-31-410-052
C. Close Access
(1)
Obey the special precautions after the work on the door (Ref. TASK 52-10-00-860-002).
(2)
Remove all the ground support equipment, the maintenance equipment, the standard and special tools and all other items.
(3)
Make sure that the work area is clean and clear of tool(s) and other items.
(4)
Close the passenger/crew door 831 (841) (Ref. TASK 52-10-00-410-001).
(5)
Remove the access platform(s).
1EFF : ALL 1 52-11-31Page 433 1 1 Feb 01/02R 1 1 1CES 1
TASK 52-11-31-000-003
Removal of the Girt Bar Fittings
1. Reason for the Job
__________________
Self Explanatory
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
No specific circuit breaker(s) safety clip(s)
No specific non metallic scraper
No specific access platform 3.5 m (11 ft. 6 in.)
98D52103501000 1 BALLAST WEIGHT - PASSENGER CREW DOOR
B. Consumable Materials
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
Material No. 11-004 USA MIL-T-81533
1.1.1TRICHLOROETHANE (METHYL CHLOROFORM)
(Ref. 20-31-00)
Material No. 19-003 USA AMS 3819
LINT-FREE COTTON CLOTH (Ref. 20-31-00)
C. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
R 25-62-44-000-002 Removal of the Escape-Slide Pack-Assembly 52-10-00-480-001 Installation of the Passenger/Crew Door Ballast Weight (98D52103501000) for Escape Slide 52-10-00-480-001 Installation of the Passenger/Crew Door Ballast Weight (98D52103501000) for Escape Slide/Raft 52-10-00-860-001 Special Precautions before Work on the Passenger/Crew Door 52-11-31-991-011 Fig. 410
1EFF : ALL 1 52-11-31Page 434 1 1 Feb 01/04 1 1 1CES 1
3. Job Set-up
__________ Subtask 52-11-31-010-055
A. Get Access WARNING : DO NOT OPEN THE PASSENGER/CREW DOOR IF THE WIND SPEED IS MORE
_______
THAN 65 KNOTS.
WARNING : BEFORE YOU START WORK ON THE DOOR, MAKE SURE THAT:
_______
-
THE EMERGENCY CONTROL HANDLE IS IN THE DISARMED POSITION WITH THE SAFETY PIN INSTALLED.
-
THE PERCUSSION LEVER OF THE DOOR-DAMPER AND EMERGENCY-OPERATION CYLINDER IS IN THE DISARMED POSITION WITH THE SAFETY PIN INSTALLED.
WARNING : STOP THE OPENING PROCEDURE IF THE RED WARNING LIGHT FLASHES.
_______ RESIDUAL PRESSURE COULD CAUSE THE DOOR TO OPEN WITH A SUDDEN FORCE AND INJURE PERSONS AND/OR DAMAGE THE AIRCRAFT.
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM DOORS 艙門2(42)
