(3)
If the wear of the bushes is not in the tolerances:
(a)
Replace the bushes (Ref. TASK 52-10-00-915-001).
(b)
Or replace the parts on which they are installed.
(4)
If the connection links (34) and (35) are worn or unserviceable:
(a) Replace the rod end of the connection links (34) and (35).
Subtask 52-11-21-220-056
E. Inspection of the Compensation Mechanism
(Ref. Fig. 605/TASK 52-11-21-991-028)
(1) Do a detailed visual inspection of the bushes, the link assemblies (at rod level) and the parts of the compensation mechanism.
1EFF : ALL 1 52-11-21Page 613 1 1 Feb 01/98 1 1 1CES 1
Upper and Lower Connection Links
Figure 604/TASK 52-11-21-991-027- 12 (SHEET 1)
1EFF : ALL 1 52-11-21 Page 614
1 1 Feb 01/98
1 1
1CES 1
Upper and Lower Connection Links
Figure 604/TASK 52-11-21-991-027- 22 (SHEET 2)
1EFF : ALL 1 52-11-21 Page 615
1 1 Feb 01/98
1 1
1CES 1
Compensation Mechanism
Figure 605/TASK 52-11-21-991-028
1EFF : ALL 1 52-11-21 Page 616
1 1 Feb 01/98
1 1
1CES 1
(2) Make sure that the dimensions are correct.
-------------------------------------------------------------------------------| FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | | DETAIL |---------------------------------------|----------------------------| | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | | ITEM | MM (IN.) | MM (IN.) | MM (IN.) | ALLOW. | | NO. |-------------------|-------------------|---------|---------| CLEAR. | | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |MM (IN.)| |--------|---------|---------|---------|---------|---------|---------|--------| | B | | | | | | | | | OD41 | 22.235 | 22.248 | | | 22.220 | | | | | (0.8753)| (0.8759)| | | (0.8748)| | | | | | | 0.000 | 0.043 | | | 0.086 | | | | | (0.0000)| (0.0016)| | |(0.0033)| | ID40 | 22.248 | 22.278 | | | | 22.306 | | | | (0.8759)| (0.8770)| | | |(0.8781) | | |--------|---------|---------|---------|---------|---------|---------|--------| | B | | | | | | | | | OD42 | 34.842 | 34.958 | | | 34.923 | | | | | (1.3756)| (1.3762)| | | (1.3749)| | | | | | | 0.000 | 0.057 | | | 0.114 | | | | | (0.0000)| (0.0022)| | |(0.0044)| | ID40 | 34.958 | 34.999 | | | | 35.037 | | | | (1.3762)| (1.3779)| | | |(1.3794) | | |--------|---------|---------|---------|---------|---------|---------|--------| | B | | | | | | | | | OD44 | 22.235 | 22.248 | | | 22.220 | | | | | (0.8753)| (0.8759)| | | (0.8748)| | | | | | | 0.000 | 0.043 | | | 0.086 | | | | | (0.0000)| (0.0016)| | |(0.0033)| | ID43 | 22.248 | 22.278 | | | | 22.306 | | | | (0.8759)| (0.8770)| | | |(0.8781) | | |--------|---------|---------|---------|---------|---------|---------|--------| | B | | | | | | | | | OD44 | 28.959 | 28.980 | | | 28.938 | | | | | (1.1401)| (1.1409)| | | (1.1393)| | | | | | | 0.0020 | 0.062 | | | 0.124 | | | | | (0.0007)| (0.0024)| | |(0.0068)| | ID45 | 29.000 | 29.021 | | | | 29.062 | | | | (1.1417)| (1.1425)| | | |(1.1441) | | -------------------------------------------------------------------------------
1EFF : ALL 1 52-11-21Page 617 1 1 Feb 01/98 1 1 1CES 1
(3)
If the wear of the bushes is not in the tolerances:
(a)
Replace the bushes (Ref. TASK 52-10-00-915-001).
(b)
Or replace the parts on which they are installed.
(4)
If the link assembly (46) is worn or unserviceable:
(a) Replace the rod end of the link assembly (46). Subtask 52-11-21-220-057
F. Inspection of the Locking Shaft Mechanism
(Ref. Fig. 606/TASK 52-11-21-991-029)
(1)
Do a detailed visual inspection of the bushes, the bearing, the link assemblies (at rod level) and the parts of the locking shaft mechanism.
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM DOORS 艙門2(15)
