(b)
 Identify the position of the girt bar fitting serrations (81), (83).

 (c)
 Move the girt bar fittings (81), (83) from the serrations on X and Y axis to adjust the clearances J6 and J7.

 (d)
 Tighten the screws (80), (82) and seal the girt bar fittings (81), (83) and the head of the screws (80) and (82) with SEALANTS (Material No. 09-005).

 (4)
 Remove the RIGGING PIN (98DNSA20206120) and put the emergency control handle in the DISARMED position.

 (5)
 Take a dynamometer, operate the emergency control handle several times, make sure that the load necessary to operate the handle does not exceed 10 daN (22.4808 lbf).

 1EFF : ALL 1 52-11-22Page 521 1 1 May 01/05 1 1 1CES 1

 Girt Bar Fittings - Adjustments
 Figure 506/TASK 52-11-22-991-022
 1EFF :  ALL  1  52-11-22 Page 522 
1  1  May 01/98
 1  1
 1CES  1

 Girt Bar Fittings - Installation
 Figure 507/TASK 52-11-22-991-023
 1EFF :  ALL  1  52-11-22 Page 523 
1  1  May 01/98
 1  1
 1CES  1

 Subtask 52-11-22-820-057
 G. Check the Bellcranck Finger Adjustement of the Door-Damper and Emergency-Operation Cylinder.
 (1) Do a check of the bellcranck finger of the door-damper and emergency-operation cylinder (Ref. TASK 52-11-14-820-002).
 Subtask 52-11-22-865-058
 H. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s): 13WN, 15WN, 48WV
 Subtask 52-11-22-710-050
 J. Tests
 (1) Do an operational test of the emergency escape-slide release (Ref. TASK 52-73-00-710-001).
 5. Close-up
________
 **ON A/C 001-002,

 Subtask 52-11-22-410-063
 A. Installation of Components
R (1) Remove the BALLAST WEIGHT - PASSENGER CREW DOOR (98D52103501000) R (Ref. TASK 52-10-00-080-001).
 (2)
 Install the door insulation.

 (3)
 Install the escape-slide (Ref. TASK 25-62-44-400-001).

 (4)
 Install the door lining panels (Ref. TASK 25-23-46-400-001) 831FZ, 831GZ, 831EZ, 831DZ, 831CZ, 831BZ, 831AZ.

 1EFF : ALL 1 52-11-22Page 524 1 1 Feb 01/02 1 1 1CES 1R **ON A/C 003-049, 051-099, 101-149, 151-199, 201-299, 301-399, 401-499,

 Subtask 52-11-22-410-063-A
 A. Installation of Components
 (1)
 Remove the BALLAST WEIGHT - PASSENGER CREW DOOR (98D52103501000) (Ref. TASK 52-10-00-080-001).

 (2)
 Install the door insulation.

 (3)
 Install the escape slide/raft (Ref. TASK 25-62-44-400-001).

 (4)
 Install the door linings panels (Ref. TASK 25-23-46-400-001) 831FZ, 831GZ, 831EZ, 831DZ, 831CZ, 831BZ, 831AZ.

 **ON A/C ALL
 Subtask 52-11-22-410-064
 B. Close Access
 (1)
 Obey the special precautions after the work on the door (Ref. TASK 52-10-00-860-002).

 (2)
 Remove the ground support and maintenance equipment, the special and standard tools and all other items.

 (3)
 Close the applicable passenger/crew door (Ref. TASK 52-10-00-410-001).

 (4)
 Remove the access platform(s).

 (5)
 Make sure that the work area is clean and clear of tool(s) and other items.

 1EFF : ALL 1 52-11-22Page 525 1 1 Aug 01/05 1 1 1CES 1 RELEASE MECHANISM - EMERGENCY ESCAPE SLIDE - INSPECTION/CHECK

_____________________________________________________________
 TASK 52-11-22-220-001
 Detailed Visual Inspection of the Ralease Mechanism of the Emergency Escape Slide of the FWD Passenger/Crew Door
 1. Reason for the Job
__________________
 Self Explanatory
 2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific circuit breaker(s) safety clip(s) No specific access platform 3.50 m (11 ft. 6 in.)
 B. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
24-42-00-861-001 Energize the Ground Service Network from the External Power 24-42-00-862-001 De-energize the Ground Service Network Supplied from
 the External Power 52-10-00-010-001 Opening of the Passenger/Crew Door 52-10-00-410-001 Closing of the Passenger/Crew Door 52-10-00-860-001 Special Precautions before Work on the Passenger/Crew
　
中國航空網(wǎng) m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM DOORS 艙門2(31)